Refining fluxes for metallurgical melts based on waste materials of the aluminium industry

Abstract

Waste slag is a major source of environmental pollution within the metallurgical industry. In the steel industry, about 100–150 kg of waste slag is produced in making one tonne of liquid steel in addition to that produced during ironmaking. In the aluminium industry, about 2–4 tonnes of waste materials are generated during the production of one tonne of aluminium. The waste products from these two industrial sectors are of particular concern because of the sheer volume and causticity of the materials. Extensive studies have been carried out at the University of Toronto to investigate potential applications for these metallurgical waste products. Studies have included: (1) desulphurization of hot metal and liquid steel using calcium aluminate fluxes made from the dross of aluminium electrolysis and remelting; (2) ferronickel desulphurization as well as simultaneous desulphurization and dephosphorization using red mud and white mud generated during alumina extraction from bauxite; and (3) recovery of nickel from spent catalysts generated by the petroleum industry. The results confirm that the application of waste byproducts from the aluminium industry, as a basis for refining fluxes in the steel industry, could be beneficial from technical, economical and environmental perspectives, thus generating social benefits for both industrial sectors.

Keywords

Aluminium extraction steelmaking sustainability ferronickel dross red mud white mud

Get full access to this article

View all access options for this article.

References

Bodsworth

, Bell

. 1972. Physical chemistry of Iron & Steel manufacture. 2nd ed. London: Longman Group Limited.

Breaut

, Guay

, Dube

. 2000. Aluminium plasma dross treatment process and calcium aluminate production: closing the loop with no residue. Proceedings of 4th International Symposium on Recycling of Metals & Engineering Materials, TMS, Stewart DL, Daley JC, Stephens RL; p. 1184–1194.

Chehade

. 2011. Preliminary study on the slag refining of a Ni-Co alloy from a spent catalyst of petroleum industry [ M. Eng. Thesis]. Department of Materials Science & Engineering, The University of Toronto.

Drouet

, Meunier

, Laflamme

, Handfield

, Bisscaro

, Lemire

. 1995. A rotary are furnace for aluminium dross processing. Proceedings of Third International Symposium on Recycling of Metals and Engineering Materials, TMS, Queneau PB, Peteson RD. editors; p. 791–891.

Dufresne

. 2007. Hydroprocessing catalysts regeneration and recycling. Appl Catal A – Gen. 322:67–75. doi: 10.1016/j.apcata.2007.01.013

Marafi

, Stanislaus

. 2008a. Spent catalyst waste management: A review Part I – developments in hydroprocessing catalyst waste reduction and use. Resour Conserv Recy. 52:859–873. doi: 10.1016/j.resconrec.2008.02.004

Marafi

, Stanislaus

. 2008b. Spent hydroprocessing catalyst management: a review Part II. Advances in metal recovery and safe disposal methods. Resour Conserv Recy. 53:1–26. doi: 10.1016/j.resconrec.2008.08.005

Slag atlas. 1981. Verlag Stahleisen M.B.H., (Dusseldorf), p. 196–198.

Wagner

. 1975. The concept of the basicity of slags. Met Trans B. 6:405–409. doi: 10.1007/BF02913825