Complex evaluation and development of electrolytic tin refining in acidic chloride media for processing tin-based scrap from lead-free soldering

Abstract

Different ways of investigation were applied to address the main difficulties of electrolytically refining the tin-based lead-free soldering waste materials in chloride solutions. The characteristics of electrorefining and the phenomena of electrocrystallisation have been targeted by examining the electrode processes with different copper and silver concentrations in the anodes. Galvanostatic experiments were carried out using a specially developed system detecting the changes in the electrode masses continually, complemented by the recording of the electrode potentials. In order to clarify the main cathode and anode processes, further investigations were carried out by the potentiodynamic technique. Galvanostatic results pointed out the causes of current losses and rough deposit structure. Potentiodynamic examinations have demonstrated the strong influence of material transport on the electrode processes. Nevertheless, with a quasi-optimised procedure, cathode tin of higher purity than technical standards could be achieved from the soldering waste material in a conventional cell.

Keywords

Soldering waste Hydrochloric acid Electrorefining Polarisation Efficiency Electrocrystallisation Tin species

Get full access to this article

View all access options for this article.

References

Behmer,

, Krajewski,

and Krüger,

1983. Untersuchungen zur elektrolytischen Raffination von Zinn unter Anwendung periodischer Stromumkehr. Raffinationsverfahren in der Metallurgie. Weinheim: GDMB – Verlag Chemie, pp.157–172.

Erdey-Grúz,

1972. Kinetics of electrode processes. New York: Wiley-Interscience.

Halsall,

1989. The refining of tin. Metallurgy, 43, pp.131–136.

Högfeldt,

1982. Stability constants of metal-ion complexes. Oxford: Pergamon Press.

Kelsall,

G. H.

and Gudyanga,

F. P.

1990. Thermodynamics of Sn-S-Cl-H₂O system at 298K. Journal of Electroanalytical Chemistry and Interfacial Electrochemistry, 280, pp.267–282. doi: 10.1016/0022-0728(90)87003-3

Kulcsár,

, Dobó,

Z. S.

and Kékesi,

2013. The effect of micro-impulse current on the morphology of tin electrodeposited from chloride solutions. Materials Science Forum, 752, pp.294–303. doi: 10.4028/www.scientific.net/MSF.752.294

Reid,

, Punch,

, Collins,

and Ryan,

2008. Effect of Ag content on the microstructure of Sn-Ag-Cu based solder alloys. Soldering and Surface Mount Technology, 20, pp.3–8. doi: 10.1108/09540910810902651

Rimaszéki,

, Kulcsár,

and Kékesi,

2012a. Application of HCl solutions for recovering the pure metal from tin scrap by electrorefining. Hydrometallurgy, 125–126, pp.55–63. doi: 10.1016/j.hydromet.2012.05.012

Rimaszéki,

, Kulcsár,

and Kékesi,

2012b. Investigation and optimization of tin electrorefining in hydrochloric acid solutions. Journal of Applied Electrochemistry, 42, pp.573–584. doi: 10.1007/s10800-012-0433-1

10.

Sillén,

L. G.

and Martell,

A. E.

1964. Stability constants of metal-ion complexes, Supplement, Special Publ. No. 25, The Chem. Soc., London.

11.

Takemoto,

, Uetani,

and Yamazaki,

2004. Dissolution rates of iron plating on soldering iron tips in molten lead-free solders. Soldering and Surface Mount Technology, 16, pp.9–15. doi: 10.1108/09540910410562473

12.

Toth,

G. B.

, Uchikoshi,

and Kekesi,

2014. Polarization characteristics of tin electrorefining in chloride solutions. Materials Science and Engineering, 39, (2), pp.103–113.

13.

Weigel,

and Zetzsche,

1974. Verfahren und Betriebsergebnisse der neuen ENAF-Zinnhütte in Vinto. Erzmetall, 27, pp.257–312.

14.

Winand,

1992. Electrocrystallisation-theory and application. Hydrometallurgy, 29, pp.567–598. doi: 10.1016/0304-386X(92)90033-V