Mineralogical quantification of iron ore sinter

Abstract

The mineralogy and microstructure of sinter play an important role in determining the physical and metallurgical properties of iron ore sinter. Characterisation of sinter phases is, therefore, a cost-effective and complementary tool to conventional physical and metallurgical testing of iron ore sinter in evaluating and predicting sinter quality. Over the years, CSIRO (Commonwealth Scientific and Industrial Research Organisation) has developed a scheme for characterising iron ore sinter which classifies primary sinter phases, such as un-reacted and partially reacted haematite, magnetite and remnant fluxes, and secondary phases including silico-ferrite of calcium and aluminium (SFCA), secondary haematite and magnetite, glass and larnite. Quantification of these phases has traditionally been carried out by manual point counting under a petrographic microscope. However, new technologies based on automated optical image analysis, quantitative X-ray diffraction and scanning electron microscopy are now available for evaluation. In this study, two sinter samples of varying chemistry were prepared and characterised using both point counting and automated optical image analysis. Quantification of sinter phases is a complementary tool for comparing the physical properties of sinter obtained from various sinter blends, and sinter phase quantification results can be used for comparing pot-grate sinter with different metallurgical properties.

Keywords

Iron ore Sinter Mineralogy Phase quantification

Get full access to this article

View all access options for this article.

References

Bristow,

N. J.

and Waters,

A. G.

1991. Role of SFCA in promoting high temperature reduction properties of iron ore sinters. Transactions of the Institute of Minining and Metallurgy, 100 (1), pp.1–10.

Donskoi,

, Manuel,

J. R.

, Austin,

, Poliakov,

, Peterson,

and Hapugoda,

. 2014. Comparative study of iron ore characterisation using a scanning electron microscope and optical image analysis. Applied Earth Science, 122 (4), pp.217–229. doi: 10.1179/1743275814Y.0000000042

Donskoi,

, Manuel,

J. R.

, Lu,

, Holmes,

R. J.

, Poliakov

and Raynlyn,

. 2009. Advances in mathematical modelling of sintering performance of iron ore fines, Proceedings, Iron Ore 2009, Perth, WA, Australia, pp.341–349.

Donskoi,

, Poliakov,

and Manuel,

J. R.

2015. Automated optical image analysis of natural and sintered iron ore. In: Lu,

(ed). Iron Ore: Mineralogy, Processing and Environmental Issues. Elsevier, pp.101–159.

Donskoi,

, Poliakov,

, Manuel,

J. R.

, Peterson,

and Hapugoda,

. 2013. Industrial strength optical image analysis system – Mineral4/Recognition4. Proceedings, Iron Ore 2013, 12–14 August 2013, Perth, WA, Australia, pp.227–241.

Donskoi,

, Poliakov,

, Manuel,

J. R.

and Raynlyn,

. 2010. Advances in optical image analysis and textural classification of iron ore fines, XXV International Mineral Processing Congress – IMPC2010, Brisbane, Australia, pp.2823–2836.

Hsieh,

L. H.

2005. Effect of raw material composition on the sintering properties. ISIJ International, 45 (4), pp. 551–559. doi: 10.2355/isijinternational.45.551

ISO 3271. 1995. Iron ores – determination of tumble strength, I.S.O. Standard.

ISO 4695. 1996. Iron ores – determination of reducibility, I.S.O. Standard.

10.

ISO 4696-1. 2007. Static test for low temperature reduction – disintegration, I.S.O. Standard.

11.

Kitamura,

. 1985. Studies and operation of high reducibility sinters. AIME Ironmaking Proceedings, 44, pp.405–414.

12.

Loo,

C. E.

, Wan,

K. T.

and Howes,

V. R.

1988. Mechanical properties of natural and synthetic mineral phases in sinters having varying reduction degradation Indices. Ironmaking Steelmaking, 15, pp.279–285.

13.

Loo,

C. E.

, Williams,

R. P.

and Matthews,

L. T.

1992. Influence of material properties on high-temperature zone reactions in sintering of iron ore. Transactions of the Institution of Mining and Metallurgy Section C – Mineral Processing and Extractive Metallurgy, 101, pp.C7–C16.

14.

Lu,

, Manuel,

J. R.

, Holmes,

R. J.

, Smyth,

, Adam,

, Edenton,

, Ware,

and Raynlyn,

. 2009. Characteristics and sintering performance of iron ore sinter fines. Proceedings, Iron Ore 2009, Perth, WA, pp.259–267.

15.

Patrick,

T. R. C.

and Pownceby,

M. I.

2001. Stability of silico-ferrite of calcium and aluminium in air-solid solution limits between 1240°C and 1390°C and phase relationships within the Fe₂O₃–CaO–Al₂O₃–SiO₂ (FCAS) System. Metallurgical and Materials Transactions B, 32B (1), pp.79–89.

16.

Pimenta,

H. P.

and Seshadri,

. 2002. Characterisation of structure of iron ore sinter and its behaviour during reduction at low temperatures. Ironmaking and Steelmaking, 29 (3), pp.169–174. doi: 10.1179/030192302225002009

17.

Pownceby, M. I. and Clout, J. M. F. 2000. Phase relations in the Fe-rich part of the system Fe2O3 (-Fe3O4)-CaO-SiO2 at 1240–1300° C and oxygen partial pressure of 5× 10-3 atm: implications for iron ore sinter. Mineral Processing and Extractive Metallurgy 109 (1), pp.36–48.

18.

Pownceby,

M. I.

and Clout,

J. M. F.

2002. Importance of fine ore chemical composition and high temperature phase relations: applications to iron ore sintering and pelletising. Transactions of the Institution of Mining and Metallurgy Section C – Mineral Processing and Extractive Metallurgy, 112 (1), pp.C44–C51. doi: 10.1179/037195503225011402

19.

Pownceby,

M. I.

, Webster,

N. A. S.

, Manuel,

J. R.

and Ware,

. 2015. Iron ore geometallurgy – examining the influence of ore composition on sinter phase mineralogy and sinter strength. Iron Ore Conference, Perth, WA 13–15 July, pp.579–586.

20.

Scarlett,

N. V. Y.

, Madsen,

I. C.

, Pownceby,

M. I.

and Christensen,

A. N.

2004a. In situ X-ray diffraction analysis of iron ore sinter phases. Journal of Applied Crystallography, 37 (3), pp.362–368. doi: 10.1107/S002188980400353X

21.

Scarlett,

N. V. Y

, Pownceby,

M. I.

, Madsen,

I. C.

and Christensen

A. N.

2004b. Reaction sequences in the formation of SFCA and SFCA-I in iron ore sinter. Metallurgical and Materials Transactions B 35B (5), pp.929–936. doi: 10.1007/s11663-004-0087-4

22.

Shigaki,

, Sawada,

and Gennai,

1986, Phase formation, in situ synchrotron XRD. During the iron ore sintering process. Transactions of the Iron and Steel Institute of Japan, 26 (10), pp.503–511. doi: 10.2355/isijinternational1966.26.503

23.

Tonzetic,

and Dippenaar,

. 2011. An alternative to traditional iron-ore sinter phase classification. Minerals Engineering, 24, pp. 1258–1263. doi: 10.1016/j.mineng.2011.04.012

24.

Webster,

N. A. S.

, Pownceby,

M. I.

and Madsen,

I. C.

2013a. In situ X-ray diffraction investigation of the formation-mechanisms of silico-ferrite of calcium and aluminium-I-type-(SFCA-I-type)-complex calcium ferrites. ISIJ International, 53 (8), pp.1334–1340. doi: 10.2355/isijinternational.53.1334

25.

Webster,

, Pownceby,

, Madsen,

and Kimpton,

. 2013b. Effect of oxygen partial pressure on the formation mechanisms of complex Ca-rich ferrites. ISIJ International, 53 (5), pp.774–781. doi: 10.2355/isijinternational.53.774

26.

Webster,

A. S.

, Pownceby,

M. I.

, Madsen,

I. C.

and Kimpton,

J. A.

2012. Silico-ferrite of calcium and aluminum (SFCA) iron ore sinter bonding phases: new insights into their formation during heating and cooling. Metallurgical and Materials Transactions B, 43B (6), pp.1344–1357. doi: 10.1007/s11663-012-9740-5

27.

Webster,

A. S.

, Pownceby,

M. I.

, Madsen,

I. C.

, Studer,

A. J.

, Manuel,

J. R.

and Kimpton,

J. A.

2014. Fundamentals of silico-ferrite of calcium and aluminum (SFCA) and SFCA-I iron ore sinter bonding phase formation: effects of CaO: SiO₂ ratio. Metallurgical and Materials Transactions B, 45B (6), pp.2097–2105. doi: 10.1007/s11663-014-0137-5