Abstract
In order to analyse the feasibility of sintering for municipal sludge treatment, a sintering pot was used for the experiment. The results showed that the main effects of sludge addition on the sintering process and sinter quality come from the changes in the heat addition and moisture content of the granulated sinter. The addition of sludge could improve the granulation efficiency of the sinter mixture and the particle size composition of the sinter. When the proportion of sludge was 7%, the addition of sludge completely replaced the water required for mixing, and the overall sintering index was the best. In this case, after reducing fuel consumption by 10%, except for the content of P, the sinter quality and the sintering index could met the requirements of steel production. Finally, the use of fuel and raw materials with high P content needed to be reduced with the addition of sludge.
Get full access to this article
View all access options for this article.