The ironmaking industry in China is developing rapidly. This paper discusses the status, technological progress, issues, and possible development directions of ironmaking in China. Because the standards for waste discharge and energy consumption have become more redundant, the steel production capacity has decreased by ∼145 million tons from 2016 to 2018. New sintering and coking technologies, such as water vapour spray sintering, high-temperature exhaust gas sintering, and semi-coke utilization, have led to distinct energy and efficiency improvements. Moreover, blast furnaces (BFs) are becoming larger and more intensive, due to which labour productivity has increased noticeably. However, some issues still remain, such as high fuel ratios, hot blast temperatures, and BF longevity. Nevertheless, eco-friendly and intelligent ironmaking is gaining importance and could be the development directions of the future.
Get full access to this article
View all access options for this article.
References
1.
MousaEABabichASenkD.Enhancement of iron ore sinter reducibility through coke oven gas injection into the modern blast furnace. ISIJ Int. 2013;53(8):1372–1380. doi: 10.2355/isijinternational.53.1372
2.
de CastroJANathNFrancaABet al.Analysis by multiphase multicomponent model of iron ore sintering based on alternative steelworks gaseous fuels. Ironmak Steelmak. 2012;39(8):605–613. doi: 10.1179/1743281212Y.0000000008
3.
DongHYangYWJiaFRet al.Thermodynamic analysis of efficient recovery and utilisation of waste heat resources during sintering process. Int J Exergy. 2013;12(4):552–569. doi: 10.1504/IJEX.2013.055079
4.
RenSLiSLSuZHet al.Poisoning effects of KCl and As2O3 on selective catalytic reduction of NO with NH3 over Mn-Ce/AC catalysts at low temperature. Chem Eng J. 2018;351:540–547. doi: 10.1016/j.cej.2018.06.085
5.
RenSYangJZhangTSet al.Role of cerium in improving NO reduction with NH3 over Mn–Ce/ASC catalyst in low-temperature flue gas. Chem Eng Res Des. 2018;133:1–10. doi: 10.1016/j.cherd.2018.02.041
6.
WangZYZhangJLJiaoKXet al.Effect of pre-oxidation on the kinetics of reduction of ironsand. J Alloy Compd. 2017;729:874–883. doi: 10.1016/j.jallcom.2017.08.293
7.
LuoYHZhuDQPanJet al.Utilisation of semi-coke as by-product derived from coal-based direct reduction process in iron ore sintering. Ironmak Steelmak. 2016;43(8):628–634. doi: 10.1080/03019233.2016.1152001
8.
TangQLZhangJLZhongJBet al.Utilization of semi-coke in iron making technologies in China. Metall Res Technol. 2017;114(4):403–412. doi: 10.1051/metal/2017031
9.
SteerJMMarshRGreensladeMet al.Opportunities to improve the utilisation of granulated coals for blast furnace injection. Fuel. 2015;151:40–49. doi: 10.1016/j.fuel.2014.12.060
10.
SongTFZhangJLWangGWet al.Influence mechanism of lignite and lignite semi-coke addition on drum strength of coke. ISIJ Int. 2018;58(2):253–258. doi: 10.2355/isijinternational.ISIJINT-2017-447
11.
KumarPPBarmanSRanjanMet al.Maximisation of non-coking coals in coke production from non-recovery coke ovens. Ironmak Steelmak. 2008;35(1):33–37. doi: 10.1179/174328107X174762
12.
ShkollerMB.Promising raw materials for the production of pulverized-coal fuel. Metallurgist. 2011;55(3–4):143–148. doi: 10.1007/s11015-011-9404-8
13.
WangZYZhangJLAnGet al.Analysis on the oversize blast furnace desulfurization and a sulfide capacity prediction model based on congregated electron phase. Metall Mater Trans B. 2016;47(1):127–134. doi: 10.1007/s11663-015-0462-3
14.
KardasE.The analysis of quality of ferrous burden materials and its effect on the parameters of blast furnace process. Metalurgija. 2013;52(2):149–152.
15.
MaJFWangGWZhangJLet al.Reduction behavior and kinetics of vanadium–titanium sinters under high potential oxygen enriched pulverized coal injection. Int J Min Met Mater. 2017;24(5):493–503. doi: 10.1007/s12613-017-1430-5
16.
WangZYZhangJLXingXDet al.Phase transitions and atomic-scale migration during the preoxidation of a titania/ferrous oxide solution. JOM. 2016;68(2):656–667. doi: 10.1007/s11837-015-1678-z
17.
WangZYZhangJLJiaoKXet al.Effects of pre-reduction degree of irons and on slag properties in melting separation process. Steel Res Int. 2018;89(3. doi: 10.1002/srin.201700363
18.
RenSZhangJLLiuWJet al.An integrated evaluation system of anthracite, meager-lean coal and bituminous coal co-injection for a blast furnace. Energy Source Part A. 2013;35(22):2123–2131. doi: 10.1080/15567036.2011.645995
19.
DuSWChenWHLucasJA.Pulverized coal burnout in blast furnace simulated by a drop tube furnace. Energy. 2010;35(2):576–581. doi: 10.1016/j.energy.2009.10.028
20.
MaJFWanLJiaGLet al.Discuss on operation of large-scale BF with low fuel rate. J Iron Steel Res Int. 2009;16:619–623.
21.
DaiFQHuangSYLiSHet al.Study of a ceramic burner for shaftless stoves. Int J Min Met Mater. 2009;16(2):149–153. doi: 10.1016/S1674-4799(09)60025-X
22.
ZhaoHBHuoSFChengSS.Study on the early warning mechanism for the security of blast furnace hearths. Int J Min Met Mater. 2013;20(4):345–353. doi: 10.1007/s12613-013-0733-4
23.
JiaoKXZhangJLLiuZJet al.Formation mechanism of the graphite-rich protective layer in blast furnace hearths. Int J Min Met Mater. 2016;23(1):16–24. doi: 10.1007/s12613-016-1206-3
24.
ChengSSYangTJXueQGet al.Optimum design and layout of the cooling apparatus for long compaignship blast furnace. J Univ Sci Technol B. 2003;10(4):24–28.
25.
LiZWenZSuFY.Analysis of efficient operating cycles for blast-furnace stoves. Metallurgist. 2013;56(11–12):799–806. doi: 10.1007/s11015-013-9654-8
26.
ZhangFMMaoQWMeiCHet al.Dome combustion hot blast stove for huge blast furnace. J Iron Steel Res Int. 2012;19(9):1–7. doi: 10.1016/S1006-706X(13)60001-1
27.
ZhangSCGuoHZLiuXJet al.Numerical calculation of flow and heat transfer process in the new-type external combustion swirl-flowing hot stove. J Univ Sci Technol B. 2003;10(5):31–34.
28.
WangZYZhangJLXingXDet al.Congregated electron phase and Wagner model applied in titanium distribution behavior in low-titanium slag. T Nonferr Metal Soc. 2015;25(5):1640–1647. doi: 10.1016/S1003-6326(15)63769-4
29.
WangHTZhaoWChuMSet al.Current status and development trends of innovative blast furnace ironmaking technologies aimed to environmental harmony and operation intellectualization. J Iron Steel Res Int. 2017;24(8):751–769. doi: 10.1016/S1006-706X(17)30115-2
30.
BoscoloMPadoanoE.Monitoring of particulate emissions to assess the outcomes of retrofitting measures at an ironmaking plant. ISIJ Int. 2011;51(9):1553–1560. doi: 10.2355/isijinternational.51.1553
31.
ZhouPGuoDWWangHet al.Data-driven robust M-LS-SVR-based NARX modeling for estimation and control of molten iron quality indices in blast furnace ironmaking. IEEE Tran Neur Netw Learn. 2018;29(9):4007–4021. doi: 10.1109/TNNLS.2017.2749412
32.
TunckayaY.Performance assessment of permeability index prediction in an ironmaking process via soft computing techniques. Proc Inst Mech Eng E. 2017;231(6):1101–1113. doi: 10.1177/0954408916654199
