Sage Journals: Discover world-class research

Abstract

This work describes welding of the sheets with different thickness values and then characterizing the mechanical and microstructural properties for two different types of welding i.e. GMAW and SMAW. The joints are devised in such pattern that the effect of sheet thickness and welding current on these properties can be easily assessed. Initial microstructural studies are carried out with high-resolution optical microscopy and SEM. These images are then processed in ImageJ software to analyze various properties of different phases involved. Mechanical properties like the tensile strength, microhardness, impact energy or toughness are also measured and correlated with the microstructures and welding parameters. The main aim of this project is to design new set of welding parameters for structural steels that are used widely in different construction works and industries. Optimizing the results and choosing the best possible way to get superior properties are the key points.

Get full access to this article

View all access options for this article.

References

Talabi

Owolabi

Adebisi

et al. Effect of welding variables on mechanical properties of low carbon steel welded joint. Adv Prod Eng Manag. 2014;9(4):181–186.

Arora

Pandu

Shajan

et al. Microstructure and impact toughness of reheated coarse grain heat affected zones of API X65 and API X80 linepipe steels. Int J Press Vessels Pip. 2018;163:36–44.

Hamad

Collins

Volkers

Effect of GMAW procedure on the heat-affected zone (HAZ) toughness of X80 (grade 550) linepipe). In 2008 7th International Pipeline Conference. American Society of Mechanical Engineers; January. pp. 553–569.

Wang

Han

et al. Microstructure and toughness of coarse grain heat-affected zone of domestic X70 pipeline steel during in-service welding. J Mater Sci. 2011;46(3):727–733.

Palani

Murugan

Selection of parameters of pulsed current gas metal arc welding. J Mater Process Technol. 2006;172(1):1–10.

Kumar

Study of mechanical properties in mild steel using metal inert gas welding. Int J Res Eng Technol. 2014;3(4):751–756.

Sapakal

Telsang

MT.

Parametric optimization of MIG welding using Taguchi design method. Int J Adv Eng Res Stud. 2012;1(4):28–30.

Abrams

Grain size measurement by the intercept method. Metallography. 1971;4(1):59–78.

Srivastava

Garg

RK.

Process parameter optimization of gas metal arc welding on IS: 2062 mild steel using response surface methodology. J Manuf Process. 2017;25:296–305.

10.

You

Shang

Wenjin

et al. Investigation on the microstructure and toughness of coarse grained heat affected zone in X-100 multi-phase pipeline steel with high Nb content. Mater Sci Eng A. 2012;558:692–701.

11.

Srinivasan

Muthupandi

Dietzel

et al. An assessment of impact strength and corrosion behaviour of shielded metal arc welded dissimilar weldments between UNS 31803 and IS 2062 steels. Mater Des. 2006;27(3):182–191.

12.

Al-Faruk

Hasib

Ahmed

et al. Prediction of weld bead geometry and penetration in electric arc welding using artificial neural networks. Int J Mech Mechatronics Eng. 2010;10(4):19–24.

13.

Chaveriat

Kim

Shah

et al. Low carbon steel weld metal microstructures: the role of oxygen and manganese. J Mater Eng. 1987;9(3):253–267.

14.

Darwish

Al Tamimi

Al-Habdan

A knowledge base for metal welding process selection. Int J Mach Tools Manuf. (1997);37(7):1007–1023.

15.

Eroğlu

Aksoy

Effect of initial grain size on microstructure and toughness of intercritical heat-affected zone of a low carbon steel. Mater Sci Eng A. 2000;286(2):289–297.

16.

Garg

Panda

Shankhwar

Investigation of the joint length of weldment of environmental-friendly magnetic pulse welding process. Int J Adv Manuf Technol. 2016;87(5–8):2415–2426.

17.

Panda

Vendan

Garg

Experimental-and numerical-based studies for magnetically impelled arc butt welding of T11 chromium alloy tubes. Int J Adv Manuf Technol. 2017;88(9–12):3499–3506.

18.

Panda

Garg

Jian

et al. Characterization of the tensile properties of friction stir welded aluminum alloy joints based on axial force, traverse speed, and rotational speed. Front Mech Eng. 2016;11(3):289–298.

Effect of welding parameters on mechanical and microstructural properties of GMAW and SMAW mild steel joints

Abstract

Get full access to this article

References