Detection and evaluation mechanism of cold rolling strip edge shape

Abstract

The edge shape problem of strip has great influence on the shape control precision, so it is extremely necessary to establish the high-precision strip edge shape model. Based on the theoretical analysis and the practical engineering, a new high-precision shape detection model, which consists of wide channels in the middle of detection roll and narrow channels on both sides, is established to analyse the problem of strip edge shape. Instance data showed that the strip lateral thickness difference was directly related with the shape state of strip, and the strip edge coverage rate and the strip deviation amount had important influences on the shape detection precision, the pattern recognition accuracy and the shape control effect, so the strip edge shape model has become one of the key factors to improve industrial application effect of the shape closed-loop control system in the present situation.

Get full access to this article

View all access options for this article.

References

Bai

Cui

et al. Control technology of complex wave for 4-high temper mill. Iron Steel. 2015;50(2):43–47.

Bai

Wang

Zhang

et al. Shape online control technique of steel strip in continuous annealing process. Iron Steel. 2016;51(2):62–66.

Chen

Research and application of target flatness setting technology for cold rolling mill. World Iron Steel. 2013;3:49–53.

Manetti

Morandini

Mantegazza

High precision massive shape control of magnetically levitated adaptive mirrors. Control Eng Pract. 2010;18(12):1386–1398. doi: 10.1016/j.conengprac.2010.07.002

Wang

Progress and developing trends of steel rolling technology in China. Iron Steel. 2014;49(7):23–28.

Ding

Yang

Intelligent model for evaluating cold rolled strip shape based on fuzzy evaluation rule. Iron Steel. 2014;49(9):61–65.

Liu

Research on automatic control technique of cold-rolled thin strip edge shape. Steel Roll. 2012;29(5):51–54.

Bao

Zhang

et al. Calculation method of flatness index in cold rolling. Iron Steel. 2014;49(12):51–53.

Shape control algorithm based on fuzzy inference and its application. Iron Steel. 2013;48(9):45–49.

10.

Malik

Hinton

JL.

Displacement of multiple coupled Timoshenko beams in discontinuous nonlinear elastic contact with application to rolling mills', J Manuf Sci Eng. 2012;134(5):156–168. doi: 10.1115/1.4007185

11.

Liu

Yang

et al. Development of cold strip shape meter with entire roller inlayed block intelligence and its industrial application. Iron Steel. 2011;46(12):86–89.

12.

Yang

Ding

et al. Industrial shape detecting system of cold rolling strip. J Cent South University. 2012;19(4):994–1001. doi: 10.1007/s11771-012-1102-6

13.

Yang

et al. Compensation model of abnormal signal and shape detection error of cold rolling Strip. J Mech Eng. 2014;50(6):30–38. doi: 10.3901/JME.2014.06.030

14.

Yang

Sun

et al. Online shape signal compensation technology of cold rolling strip and its industry application. J Mech Eng. 2011;47(12):56–61. doi: 10.3901/JME.2011.12.056

15.

Yang

Online shape dynamic wrapping angle compensation model of cold Strip. J Iron Steel Res Int. 2011;18(7):28–32. doi: 10.1016/S1006-706X(11)60086-1

16.

Yang

et al. Effect of strip edge offset on original shape signal of cold rolling strip. Iron Steel. 2014;49(1):52–56.

17.

Xiong

Guo

Ding

et al. Technology of the transverse thickness difference control for cold rolled non-oriented silicon steel. Iron Steel. 2016;51(1):65–69.

18.

Song

Shen

Yang

et al. Effect of the lateral thickness difference and the width-thickness ratio on the critical instability shape of cold rolled strip. J Plast Eng. 2015;22(4):54–60.

19.

Hao

Gong

et al. Development of optimization algorithm for closed-loop feedback control in cold strip rolling. J Mech Eng. 2012;48(6):39–43. doi: 10.3901/JME.2012.06.039

20.

Dai

Zhang

Analysis and experiment on central buckling and post buckling of thin cold-rolled sheet. J Mech Eng. 2011;47(2):44–50. doi: 10.3901/JME.2011.02.044

21.

Yan

Zhang

Jia

et al. Research on analyzing the flatness adjusting capacity for cold mill and its application. J Mech Eng. 2011;47(4):77–81. doi: 10.3901/JME.2011.04.077

22.

Song

Shen

Yang

et al. Shape control dimensionality reduction efficiency inherited regulation method of cold rolling wide strip. Iron Steel. 2016;51(1):70–75.

23.

Shan

Liu

Jia

A recognition method of new shape pattern containing the cubic shape. Iron Steel. 2010;45(8):56–60.

24.

Liu

Ding

et al. Theoretical computational method of shape standard curve. Chin J Mech Eng. 2008;44(8):137–142. doi: 10.3901/JME.2008.08.137