Investigation on the removal efficiency of inclusions in Al-killed liquid steel in different refining processes

Abstract

Industry trials were carried out to study the removal efficiency of inclusions in Al-killed liquid steel in the processes of BOF–LF–RH–CC and BOF–RH–CC. It was found that the removal efficiency of inclusions has a high dependence on inclusion types. Solid inclusions are more easily to be removed than liquid inclusions. The removal efficiency of solid Al₂O₃ inclusions is higher than that of solid CaO–Al₂O₃–MgO inclusions. As liquid CaO–Al₂O₃–MgO inclusions coexisted with solid CaO–Al₂O₃–MgO inclusions in the liquid steel, the low removal efficiency of inclusions in RH degassing process was found in BOF–LF–RH–CC process. However, high removal efficiency and ultra-low total oxygen (T.O) content were obtained in BOF–RH–CC process because the inclusions were mainly composed of solid Al₂O₃ although initial T.O content before RH degassing was relatively high. This is due to the fact that solid Al₂O₃ tends to form cluster-shaped inclusions which have both a higher contact angle and a lower work of adhesion with steel than calcium aluminate, resulting in easier removal by RH degassing. Therefore, it is proposed to weaken steel–slag reaction and calcium treatment before RH degassing to retain solid Al₂O₃ inclusions in the steel.