In the present study a model for future use in the modelling of moving bed direct reduction reactors has been developed. The model of a fixed bed reactor for the production of sponge iron from haematite incorporates both heat- and mass-transfer, as well as the chemical reduction rate. The model results were compared to the experimental data obtained from a lab scale reactor in the temperature range 1123–1273 K, as well as to the output from a simple model assuming isothermal conditions. The H2/CO ratio (β) of the reducing gas was in all cases varied from 0.8 to 2.0. Overall the non-isothermal model developed permits a more accurate representation of the experimental data than the isothermal estimates, with a typical discrepancy of only 1.3%.
GojicM.: ‘Current state and development of steelmaking processes’, Metalurgija, 2004, 3, (43), 163–168.
3.
BattleT. P.: ‘Sustainability in ironmaking: the rise of direct reduction’, in ‘Proceedings of the extraction and processing division symposium on pyrometallurgy in honor of David G.C. Robertson’, (ed. MackeyP. J..), et al275–288; 2014, Hoboken, NJ, John Wiley & Sons, Inc.
4.
PinegarH. K.MoatsM. S.SohnH. Y.: ‘Flowsheet development, process simulation and economic feasibility analysis for novel suspension ironmaking technology based on natural gas: Part 1 – flowsheet and simulation for ironmaking with reformerless natural gas’, Ironmaking Steelmaking, 2012, 39, (6), 398–408. doi: 10.1179/1743281211Y.0000000053
5.
WangC.LarssonM.RymanC.GripC. E.WikströmJ. O.JohnssonA.EngdahlJ.: ‘A model on CO2 emission reduction in integrated steelmaking by optimization methods’, Int. J. Energ. Res., 2008, 32, (12), 1092–1106. doi: 10.1002/er.1447
6.
DuttaS. K.LeleA. B.PancholiN. K.: ‘Studies on direct reduced iron melting in induction furnace’, Trans. Indian Inst. Met., 2004, 57, (5), 467–473.
7.
SawadaA.MitamotoT.: ‘Overview of market for direct reduced iron’, Kobelco Technol. Rev., 2010, 29, 47–49.
8.
AnamericB.KawatraS. K.: ‘Properties and features of direct reduced iron’, Miner. Process. Extr. Metall.Rev., 2007, 28, 59–116. doi: 10.1080/08827500600835576
9.
ElliotA.KopfleJ.: ‘New developments in the MIDREX® direct reduction process’; 2008, Charlotte, NC, Midrex Technologies.
10.
ChatterjeeA.: ‘Sponge iron production by direct reduction of iron oxide’; 2012, India, PHI Learning Private Limited.
11.
MarkoticA.DolicN.TrujicV.: ‘State of the direct reduction and reduction smelting processes’, J. Min. Metall., 2002, 8, (3–4), 123–141. doi: 10.2298/JMMB0204123M
12.
BattleT.SrivastavaU.KopfleJ.HunterR.McClellandJ.: ‘Chapter 1.2 — the direct reduction of iron’ in ‘Treatise on process metallurgy’, (ed. SeetharamanS.), 89–176; 2014, Boston, Elsevier.
JiangX.WangL.ShenF. M.: ‘Shaft furnace direct reduction technology — midrex and energiron’, Adv. Mater. Res., 2013, 805–806, 654–659. doi: 10.4028/www.scientific.net/AMR.805-806.654
15.
BaratiM.: ‘Energy intensity and greenhouse gases footprint of metallurgical processes: a continuous steelmaking case study’, Energy, 2010, 35, 3731–3737. doi: 10.1016/j.energy.2010.05.022
16.
AguilarJ.FuentesR.ViramontesR.: ‘Simulation of iron ore reduction in a fixed bed’, Modell. Simul. Mater. Sci. Eng., 1995, 3, (2), 131–147. doi: 10.1088/0965-0393/3/2/001
17.
YagiJ.TakahashiR.OmoriY.: ‘Study on the reduction process of iron oxide pellets in isothermal fixed bed’, Sci. Rep. Res. Inst.,Tohoku University. Ser. A, Phys., Chem. Metall., 1971, 23, 31–47.
18.
LongbottomR.KolbeinsenL.: ‘Iron ore reduction with CO and H2 gas mixtures — thermodynamic and kinetic modelling’, 4th ULCOS Seminar, 1–2 October 2008, Essen, Germany, 1–13.
19.
BeheshtiR.Moosberg-BustnesJ.AuneR. E.: ‘Modeling and simulation of isothermal reduction of a single hematite pellet in gas mixtures of H2 and CO’ in ‘TMS 2014 supplemental proceedings’, 495–502; 2014, Hoboken, NJ, John Wiley & Sons, Inc.
20.
LevenspielO.: ‘Chemical reaction engineering’, 1999, Hoboken, NJ, USA, John Wiley & Sons.
21.
YagiJ.-I.SzekelyJ.: ‘The effect of gas and solids maldistribution on the performance of moving-bed reactors: the reduction of iron oxide pellets with hydrogen’, AIChE J., 1979, 25, (5), 800–810. doi: 10.1002/aic.690250508
22.
KolbeinsenL.: ‘Modelling of DRI processes with two simultaneously active reducing gases’, Steel Res. Int., 2010, 81, (10), 819–828. doi: 10.1002/srin.201000144
23.
SzekelyJ.EvansJ. W.SohnH. Y.: ‘Gas-solid reaction’; 1976, New York, USA, Academic Press.
24.
ValipourM. S.: ‘Mathematical modeling of a non-catalytic gas-solid reaction: hematite pellet reduction with syngas’, Trans. C: Chem. Chem. Eng., 2009, 16, (2), 108–124.
25.
BeheshtiR.Moosberg-BustnesJ.William KennedyM.AuneR. E.: ‘Reduction of commercial hematite pellet in isothermal fixed bed—experiments and numerical modelling’, Ironmaking Steelmaking, 2015, in press.
26.
ShiJ.DonskoiE.McElwainD. L. S.WibberleyL. J.: ‘Modelling the reduction of an iron ore-coal composite pellet with conduction and convection in an axisymmetric temperature field’, Math. Comput. Modell., 2005, 42, (1–2), 45–60. doi: 10.1016/j.mcm.2005.05.014
27.
ValipourM. S.SaboohiY.: ‘Modeling of multiple noncatalytic gas–solid reactions in a moving bed of porous pellets based on finite volume method’, Heat Mass Transfer, 2007, 43, (9), 881–894. doi: 10.1007/s00231-006-0154-2
28.
RahimiA.NiksiarA.: ‘A general model for moving-bed reactors with multiple chemical reactions part I: model formulation’, Int. J. Min. Process., 2013, 124(November), 58–66. doi: 10.1016/j.minpro.2013.02.015
29.
SunS.LuW. K.: ‘Mathematical modelling of reactions in iron ore/coal composites’, ISIJ Int., 1993, 33, (10), 1062–1069. doi: 10.2355/isijinternational.33.1062
PatissonF.AblitzerD.: ‘Modeling of gas-solid reactions: kinetics, mass and heat transfer, and evolution of the pore structure’, Chem. Eng. Technol., 2000, 23, (1), 75–79. doi: 10.1002/(SICI)1521-4125(200001)23:1<75::AID-CEAT75>3.0.CO;2-V
32.
LKAB: ‘LKAB product booklet’; 2013, Sweden, LKAB.
33.
TakenakaY.KimuraY.NaritaK.KanekoD.: ‘Mathematical model of direct reduction shaft furnace and its application to actual operations of a model plant’, Comput. Chem. Eng., 1986, 10, (1), 67–75. doi: 10.1016/0098-1354(86)85047-5
34.
NouriS. M. M.Ale EbrahimH.JamshidiE.: ‘Simulation of direct reduction reactor by the grain model’, Chem. Eng. J., 2011, 166, (2), 704–709. doi: 10.1016/j.cej.2010.11.025
35.
ParisiD. R.LabordeM. A.: ‘Modeling of counter current moving bed gas-solid reactor used in direct reduction of iron ore’, Chem. Eng. J., 2004, 104, 35–43. doi: 10.1016/j.cej.2004.08.001
36.
TowhidiN.SzekelyJ.: ‘Reduction kinetics of commercial low-silica hematite pellets with CO-H2 mixture range 600–1232°C’, Ironmaking Steelmaking, 1981, 6, 237–249.
37.
TurkdoganE. T.VintersJ. V.: ‘Gaseous reduction of iron oxides: part I. Reduction of hematite in hydrogen’, Metall. Mater. Trans. B, 1971, 2(November), 3175–3188. doi: 10.1007/BF02814970
38.
EdstromJ. O.: ‘The mechanism of reduction of iron oxide’, J. Iron Steel Inst., 1953, 175, 289–304.
39.
PoliA. A.CirilloM. C.: ‘On the use of the normalized mean square error in evaluating dispersion model performance’, Atmos. Environ. Part A. Gen. Top., 1993, 27, (15), 2427–2434. doi: 10.1016/0960-1686(93)90410-Z
