This study investigates the impact of current density on the microstructure, composition, and internal stress of Ni-W alloys electrodeposited in a citrate system. Using XRD, SEM, EDS, TEM, and XPS, it was found that tungsten serves as a solute in a Ni-W FCC structure oriented in the (111) direction. Increasing current density led to higher tungsten content and current efficiency. The addition of 2-Butyne-1,4-diol altered the carbon content, significantly reducing internal stress by promoting carbide formation near grain boundaries, which prevented coating shrinkage during hydrogen escape. This carbon enrichment improved the alloy's corrosion resistance.
PodgornikB, MasslerO, KafexhiuF, . Crack density and tribological performance of hard-chrome coatings. Tribol Int. 2018;121:333–340. doi:10.1016/j.triboint.2018.01.055
2.
SafaviMS, WalshFC.Electrodeposited Co-P alloy and composite coatings: a review of progress towards replacement of conventional hard chromium deposits. Surf Coat Technol. 2021;422:127564, doi:10.1016/j.surfcoat.2021.127564
3.
HuangL, DongJX, YangFZ, . Studies on the mechanism, structure and microhardness of Ni-W alloy electrodeposits. Trans IMF. 1999;77(5):185–187. doi:10.1080/00202967.1999.11871279
4.
HosseiniMG, AbdolmalekiM, GhahremaniJ.Investigation of corrosion resistance of electrodeposited Ni–W/SiC composite coatings. Corros Eng Sci Technol. 2014;49(4):247–253. doi:10.1179/1743278213Y.0000000120
5.
Garcia-UrrutiaI, JonesLA, DiezJA, . Effect of bath stabiliser on performance of electrodeposited Ni–W coatings. Trans IMF. 2011;89(3):132–136. doi:10.1179/174591911X13013072274273
6.
HosseiniMG, AbdolmalekiM, Seyed SadjadiSA, . Electrodeposition of Ni–W–B nanocomposite from tartrate electrolyte as alternative to chromium plating. Surf Eng, 2009, 25(5): 382–388. doi:10.1179/026708408X343609
7.
ImazN, DíezJA, OstraM, . Advanced Ni–W coatings obtained by the combination of pulse plating and chemometric techniques. Trans IMF. 2014;92(6):305–315. doi:10.1179/0020296714Z.000000000214
8.
ÁbelM, ZáchenskáJ, DobročkaE, . Electrocatalytic properties of pulse plated Ni-W alloy coatings in alkaline electrolytes. Trans IMF. 2021;99(1):23–28. doi:10.1080/00202967.2020.1841453
9.
PanagopoulosCN, PlainakisGD, GiannakopoulosKI.Adhesion of electrodeposited nanocrystalline Ni–W coatings on Cu. Trans IMF. 2018;96(1):46–51. doi:10.1080/00202967.2018.1403102
10.
DilekS, AlgülH, AkyolA, . Pulse electro co-deposition of submicron-sized TiC reinforced Ni–W coatings: tribological and corrosion properties. J Asian Ceram Soc. 2021;9(2):673–685. doi:10.1080/21870764.2021.1911058
11.
DetorAJ, MillerMK, SchuhCA.Solute distribution in nanocrystalline Ni–W alloys examined through atom probe tomography. Philos Mag. 2006;86(28):4459–4475. doi:10.1080/14786430600726749
AllahyarzadehM, AliofkhazraeiM, RouhaghdamAS, . Electrodeposition of multilayer Ni–W and Ni–W-alumina nanocomposite coatings. Surf Eng. 2017;33(5):327–336. doi:10.1080/02670844.2016.1277640
14.
Arunsunai KumarK, Paruthimal KalaignanG, MuralidharanVS.Enhanced corrosion resistance of Ni–W alloy with inclusion of TiN nanoparticles by electrodeposition method. Trans IMF. 2013;91(4):202–206. doi:10.1179/0020296713Z.000000000110
15.
DrugaJ, KašiarováM, DobročkaE, . Corrosion and tribological properties of nanocrystalline pulse electrodeposited Ni–W alloy coatings. Trans IMF. 2017;95(1):39–45. doi:10.1080/00202967.2017.1262117
Feng-jiaoHE, MiaoW, XinL.Properties of electrodeposited amorphous Fe-Ni-W alloy deposits. Trans Nonferrous Met Soc China. 2006;16(6), doi:10.1016/S1003-6326(07)60008-9
18.
LongX, HangT, GuoY, . Influence of intercolony boundary on corrosion behavior of electrodeposited Ni–W alloy for electronic connector applications. Mater Chem Phys. 2020;239:121989, doi:10.1016/j.matchemphys.2019.121989
19.
MatsuiI, WatanabeA, UesugiT, . Mechanical properties and microstructures after abnormal grain growth in electrodeposited Ni–W alloys. Materialia. 2019;8:100481, doi:10.1016/j.mtla.2019.100481
20.
YounesEG.Electroplating of high tungsten content Ni/W alloys. Electrochem Solid-State Lett. 2000;3(12), doi:10.1149/1.1391203
21.
LiuW, LiD.Study of internal stress of amorphous Ni–W alloy films. Mater Sci Technol. 2009;25(8), doi:10.1179/174328408X311071
22.
Pramod KumarU, Joseph KennadyC.Effect of benzaldehyde on the electrodeposition and corrosion properties of Ni–W alloys. Int J Min er Metall Mater. 2015;22(10), doi:10.1007/s12613-015-1168-x
23.
YangF, GuoYF, HuangL, . Electrodeposition, structure and corrosion resistance of nanocrystalline Ni-W alloy. Chin J Chem. 2004;22(3), doi:10.1002/cjoc.20040220303
24.
MizushimaI, TangPT, HansenHN, . Development of a new electroplating process for Ni–W alloy deposits. Electrochim Acta. 2005;51(5), doi:10.1016/j.electacta.2005.04.050
25.
NagaiT, HodouchiK, MatsubaraH.Relationship between film composition and microhardness of electrodeposited Ni–W–B films prepared using a citrate–glycinate bath. Surf Coat Technol. 2014;253; doi:10.1016/j.surfcoat.2014.05.022
26.
YamasakiT.High-strength nanocrystalline Ni-W alloys produced by electrodeposition and their embrittlement behaviors during grain growth. Scr Mater. 2001;44(8-9):1497–1502. doi:10.1016/S1359-6462(01)00720-5
27.
NiaNS, CreusJ, FeaugasX, . Influence of metallurgical parameters on the electrochemical behavior of electrodeposited Ni and Ni–W nanocrystalline alloys. Appl Surf Sci. 2016;370:149–159. doi:10.1016/j.apsusc.2016.02.101
28.
ZiebellTD, SchuhCA.Residual stress in electrodeposited nanocrystalline nickel-tungsten coatings. J Mater Res. 2012;27(9):1271–1284. doi:10.1557/jmr.2012.51
JuškėnasR, ValsiūnasI, PakštasV, . On the state of W in electrodeposited Ni–W alloys. Electrochim Acta. 2009;54(9):2616–2620. doi:10.1016/j.electacta.2008.10.060
32.
KabiS, RaeissiK, SaatchiA.Effect of polarization type on properties of Ni–W nanocrystalline electrodeposits. J Appl Electrochem. 2009;39(8):1279–1285. doi:10.1007/s10800-009-9796-3
33.
MarvelCJ, CantwellPR, HarmerM.The critical influence of carbon on the thermal stability of nanocrystalline Ni–W alloys. Scr Mater. 2015;96:45–48. doi:10.1016/j.scriptamat.2014.10.022
34.
AykacB, ErdoganM, KarakayaI.Determination of internal stress of Ni electroplated samples in sulphamate solutions. ECS Trans. 2017;77(11):1079, doi:10.1149/07711.1079ecst
35.
LiuJ, XuB, WangH, . Effects of film thickness and microstructures on residual stress. Surf Eng. 2016;32(3):178–184. doi:10.1179/1743294415Y.0000000028
36.
Beltowska-LehmanE, IndykaP, BigosA, . Effect of hydrodynamic conditions of electrodeposition process on microstructure and functional properties of Ni-W/ZrO2 nanocomposites. J Electroanal Chem. 2016;775:27–36. doi:10.1016/j.jelechem.2016.05.003
37.
MézinA, HemelA.Measuring coating internal stresses by the curvature method applied to a beveled sample. Surf Coat Technol. 2014;258:1128–1136. doi:10.1016/j.surfcoat.2014.07.021
FabroMA, MenaM.Effect of organic plating additives concentration on carbon content and donor density of electroplated Tin[C]. IOP Conf Ser: Mater Sci Eng. 2019;540(1):012002, doi:10.1088/1757-899X/540/1/012002
40.
KumarUP, ShanmuganS, KennadyCJ, . Anti-corrosion and microstructural properties of Ni–W alloy coatings: effect of 3, 4-Dihydroxybenzaldehyde. Heliyon. 2019;5(3):e01288, doi:10.1016/j.heliyon.2019.e01288
41.
WasekarN.The influence of grain size and triple junctions on corrosion behavior of nanocrystalline Ni and Ni-W alloy. Scr Mater. 2022;213:114604, doi:10.1016/j.scriptamat.2022.11460
