The current investigation focuses on the comparative assessment of each alloying element such as titanium, chromium, boron, and molybdenum on mechanical and solid particle erosion behaviour of Iron amorphous composite coatings. Iron amorphous composite coatings were deposited on 316L steel. Based on mechanical and erosion properties, the ranking of the alloying element was derived using the Fuzzy analytic hierarchy process (FAHP) and Grey relational analysis (GRA). Eight different series of Iron-based composite coatings with varying alloying elements were deposited on 316L steel. The results indicated that titanium showed the maximum hardness and adhesion pull-off strength, boron showed maximum fracture toughness, Molybdenum indicated the lowest porosity and chromium indicated maximum corrosion resistance. The result of FAHP + GRA concluded that the ranking of Fe amorphous composite coatings followed the order as FeCSiMoBCr10Ti (C-2)> FeCSiMoBCr5Ti (C-1) FeCSiMo10BCrTi (C-6)> > FeCSiMo5BCrTi (C-5)> FeCSi10MoBCrTi (C-8) > FeCSiMoB10CrTi (C-4) > FeCSi5MoBCrTi (C-7) > FeCSiMoB5CrTi (C-3).
ZhangJ, LiuM, SongJ, . Microstructure and corrosion behavior of Fe-based amorphous coating prepared by HVOF. J Alloys Compd. 2017;721:506–511. doi:10.1016/j.jallcom.2017.06.046
5.
SharmaRK, DasRK, KumarSR.Microstructure, mechanical and tribological properties of high velocity oxy fuel thermal spray coating: a review. Materwiss Werksttech. 2023;54(1):90–97. doi:10.1002/mawe.202200101
6.
YinY, PanC, ZhangR, . Research on microstructure transformation and property of 18Cr–0.2C Fe-based coatings. Surf Eng. 2018;35(7):1–7. doi:10.1080/02670844.2018.1548416
7.
WangS-L, ChengJ-C, YiS-H, . Corrosion resistance of Fe-based amorphous metallic matrix coating fabricated by HVOF thermal spraying. Trans Nonferrous Met Soc China. 2014;24(1):146–151. doi:10.1016/s1003-6326(14)63040-5
8.
SharmaRK, DasRK, KumarSR.Effect of varying chromium and titanium content on corrosion, mechanical and solid particle erosion properties of iron alloy based coating. Materwiss Werksttech. 2022;53(6):675–685. doi:10.1002/mawe.202100409
9.
SharmaRK, DasRK, KumarSR.Effect of chromium–titanium on corrosion and erosion of HVOF coating. Surf Eng. 2022;38(4):366–374. doi:10.1080/02670844.2022.2076015
10.
SharmaRK, DasRK, KumarSR.Microstructure, mechanical and erosion wear analysis of post heat treated iron alloy based coating with varying chromium. Materwiss Werksttech. 2021;52(11):1173–1184. doi:10.1002/mawe.202100080
11.
SharmaRK, DasRK, KumarSR.Investigation of solid particle erosion behaviour of Fe-Cr alloy coating. Int J Surf Sci Eng. 2023;17:44, doi:10.1504/ijsurfse.2023.128886
12.
ChengJ, LiuQ, SunB, . Structural and tribological characteristics of nanoscale FePSiBNb coatings. J Therm Spray Technol. 2017;26(3):530–538. doi:10.1007/s11666-016-0518-1
13.
MedyńskiD, SamociukB, JanusA, . Effect of Cr, Mo and Al on microstructure, abrasive wear and corrosion resistance of Ni-Mn-Cu cast iron. Materials (Basel). 2019;12(21):3500. doi:10.3390/ma12213500
14.
NiuB, WangX, WuK, . Mesoporous titanium dioxide: synthesis and applications in photocatalysis, energy and biology. Materials (Basel). 2018;11(10):1910. doi:10.3390/ma11101910
15.
YinY, PanC, ZhangR, . The effect of Ti addition on the microstructure and properties of high chromium iron-based coatings. J Alloys Compd. 2018;765:782–790. doi:10.1016/j.jallcom.2018.05.230
16.
Aguilar-HurtadoJY, Vargas-UscateguiA, Paredes-GilK, . Boron addition in a non-equiatomic Fe50Mn30Co10Cr10 alloy manufactured by laser cladding: microstructure and wear abrasive resistance. Appl Surf Sci. 2020;515(146084):146084. doi:10.1016/j.apsusc.2020.146084
17.
LentzJ, RöttgerA, GroßwendtF, . Enhancement of hardness, modulus and fracture toughness of the tetragonal (Fe,Cr)2B and orthorhombic (Cr,Fe)2B phases with addition of Cr. Mater Des. 2018;156:113–124. doi:10.1016/j.matdes.2018.06.040
18.
LingZ, ChenW, YangX, . Interfacial morphologies and corrosion behaviours of novel Fe-Cr-B alloys immersed in molten aluminium. Mater Res Express. 2019;6(4):046557. doi:10.1088/2053-1591/aafeb1
ZhuZ, XuL, ChenG, . Optimization on tribological properties of aramid fiber and CaSO4 whisker reinforced non-metallic friction material with analytic hierarchy process and preference ranking organization method for enrichment evaluations. Mater Des. 2010;31:551–555. doi:10.1016/j.matdes.2009.07.015
21.
ManiyaK, BhattM.A selection of material using a novel type decision-making method: preference selection index method. Mater Des. 2010;31:1785–1789. doi:10.1016/j.matdes.2009.11.020
22.
DengJL.Introduction to gray system theory. J Gray Syst. 1989;1(1):1–24.
23.
SaatyTL.Decision making with the analytic hierarchy process. Int J Serv Sci. 2008;1:83. doi:10.1504/ijssci.2008.017590
24.
SikderB, MukherjeeS, ChandaA.Role of crack profile in the calculation of indentation fracture toughness for highly brittle ceramics. Mater Today: Proc. 2017;4(9):9622–9626. doi:10.1016/j.matpr.2017.06.236
25.
WangY, LiMX, SuoHL.Mechanical properties of YSZ thermal barrier coatings with segmented structure. Surf Eng. 2012;28(5):329–332. doi:10.1179/1743294412y.0000000006
26.
SharmaRK, DasRK, KumarSR.Effect of HVOF spraying parameters on fracture, erosion and thermal properties of Fe alloy-based coating materials. Proc Inst Mech Eng L J Mater Des Appl. 2021;235(7):1703–1711. doi:10.1177/1464420721999682
27.
SharmaRK, DasRK, KumarSR.Microstructure, adhesion and erosion properties of Fe-Cr-Ti-Mo-C-Si coating with varying titanium. Mater Today Commun. 2021;26(101826):101826. doi:10.1016/j.mtcomm.2020.101826
28.
WangZ, KongD, WangM, . Sealing effect of surface porosity of Ti-P composite films on tinplates. RSC Adv. 2019;9(23):12990–12997. doi:10.1039/c8ra10523e
29.
WangJ, LuJ, XingX, . Effects of B contents on the microstructure and wear resistance of hypereutectic Fe-Cr-C hard facing alloy coating. Mater Res Express. 2019;6(10):1065h2. doi:10.1088/2053-1591/ab430f
30.
SharmaRK, DasRK, KumarSR.Effect of chromium content on microstructure, mechanical and erosion properties of Fe-Cr-Ti-Mo-C-Si coating. Surf Interf. 2021;22(100820):100820. doi:10.1016/j.surfin.2020.100820
31.
LiuD, ZhaoJ, LiY, . Effects of boron content on microstructure and wear properties of FeCoCrNiBx high-entropy alloy coating by laser cladding. Appl Sci (Basel). 2019;10(1):49. doi:10.3390/app10010049
32.
MinJ, GuL, ChenY, . Damping performance of Mo-based coatings prepared by supersonic arc spraying. Surf. Eng. 2021;37(11):1388–1395. doi:10.1080/02670844.2021.1981114
33.
GhorbaniR, RahmatiM, RaeissiK, . Effect of molybdate on corrosion performance of oxide coating produced on 7075 Al alloy using PEO. Coatings. 2022;12(2):184. doi:10.3390/coatings12020184
34.
PischowKA, ErikssonL, HarjuE, . The influence of titanium interlayers on the adhesion of PVD TiN coatings on oxidized stainless steel substrates. Surf Coat Technol. 1993;58(3):163–172. doi:10.1016/0257-8972(93)90003-7
35.
MoscickiT, PsiukR, SłomińskaH, . Influence of overstoichiometric boron and titanium addition on the properties of RF magnetron sputtered tungsten borides. Surf Coat Technol. 2020;390:125689. doi:10.1016/j.surfcoat.2020.125689
