To reduce the destruction of organic biological fouling in marine steel, nickel-based (NiCrAlY) transition coatings with and without silver (Ag) doping were prepared on AH32 marine steel by plasma spraying. The coatings exhibited a layered structure, and AlNi3 (111), (200), and (220) diffraction peaks were detected. The Ag (111) peaks were also observed for the Ag-doped coatings. The number of sulphate-reducing bacteria (SRB) adsorbed on the coating surfaces reduced after immersion in the bacterial solution, and their shells were disintegrated because of the presence of Ag. The corrosion potentials of AH32, NiCrAlY, and NiCrAlY(Ag) coated AH32 plates were nearly identical at approximately −720 mV. After being covered with organic paint, the corrosion potential and current density of the NiCrAlY(Ag) coating increased to −624 mV and decreased by one order of 2.75 × 10−6 A cm−2, respectively. The NiCrAlY(Ag) coating effectively inhibited biological fouling.
MostafanejadA, IranmaneshM, ZarebidakiA.An experimental study on stress corrosion behavior of A131/A and A131/AH32 low carbon steels in simulated seawater. Ocean Eng. 2019;188:106204. doi:10.1016/j.oceaneng.2019.106204
2.
ShuW, MaZ, LuL, . Insight into effect of alloy elements on corrosion extension of defective coating/AH32 steel system in short-term immersion. Mater Chem Phys. 2021;273:125107. doi:10.1016/j.matchemphys.2021.125107
3.
TianY, ZhaoH, YangR, . In-situ SEM investigation on stress-induced microstructure evolution of austenitic stainless steels subjected to cavitation erosion and cavitation erosion-corrosion. Mater Des. 2022;213:110314. doi:10.1016/j.matdes.2021.110314
4.
PratiknoH.Aging treatment to increase the erosion-corrosion resistance of AA6063 alloys for marine application. Proced Earth Planet Sci. 2015;14:41–46. doi:10.1016/j.proeps.2015.07.083
5.
JinH, TianL, BingW, . Bioinspired marine antifouling coatings: status, prospects, and future. Prog Mater Sci. 2022;124:100889. doi:10.1016/j.pmatsci.2021.100889
6.
AmalaMM, SinghA, FrancoA, . Enhancement of corrosion resistance on plasma spray coated mild steel substrate exposed to marine environment. Mater Today Proc. 2019;15:84–89. doi:10.1016/j.matpr.2019.05.028
7.
ZhongX, DongJ, LiuM, . Experimental study on ship fouling cleaning by ultrasonic-enhanced submerged cavitation jet: a preliminary study. Ocean Eng. 2022;258:111844. doi:10.1016/j.oceaneng.2022.111844
8.
SoaresCG, GarbatovY, ZayedA, . Influence of environmental factors on corrosion of ship structures in marine atmosphere. Corros Sci. 2009;51(9):2014–2026. doi:10.1016/j.corsci.2009.05.028
9.
DingT, XuL, LiuX, . A Cu2O-based marine antifouling coating with controlled release of copper ion mediated by amphiphilic PLMA-b-PDMAEMA copolymers. Prog Org Coat. 2022;170:107003. doi:10.1016/j.porgcoat.2022.107003
10.
Abi NassifL, RioualS, FarahW, . Electrophoretic deposition of zinc alginate coatings on stainless steel for marine antifouling applications. J Env Chem Eng. 2020;8(5):104246. doi:10.1016/j.jece.2020.104246
11.
ChenJ, JianR, YangK, . Urushiol-based benzoxazine copper polymer with low surface energy, strong substrate adhesion and antibacterial for marine antifouling application. J Clean Prod. 2021;318:128527. doi:10.1016/j.jclepro.2021.128527
12.
Editorial Department of this Journal. Coatings technology and abstracts. New China Stand Marine Coatings Ind. 2009;30:21–27.
13.
HeyerA, D'SouzaF, MoralesCFL, . Ship ballast tanks a review from microbial corrosion and electrochemical point of view. Ocean Eng. 2013;70:188–200. doi:10.1016/j.oceaneng.2013.05.005
14.
FarkasA, DegiuliN, MartićI, . Energy savings potential of hull cleaning in a shipping industry. J Clean Prod. 2022;374:134000. doi:10.1016/j.jclepro.2022.134000
15.
PowellCA.Copper-nickel sheathing and its use for ship hulls and offshore structures. Int Biodeterior Biodegradation. 1994;34(3):321–331. doi:10.1016/0964-8305(94)90091-4.
16.
LogunovAV, DanilovDV, KhraminRV.High-Strength nickel-based alloy SLGS-5 for operation in active marine salt corrosion environment. Mater Today Proc. 2019;11:453–458. doi:10.1016/j.matpr.2019.01.012
17.
MaroofM, SujithraR, TewariRP.Superelastic and shape memory equi-atomic nickel-titanium (Ni-Ti) alloy in dentistry: a systematic review. Mater Today Commun. 2022;33:104352. doi:10.1016/j.mtcomm.2022.104352
18.
RenY, YangK, ZhangB.In vitro study of platelet adhesion on medical nickel-free stainless steel surface. Mater Lett. 2005;59(14):1785–1789. doi:10.1016/j.matlet.2005.01.067.
19.
CibikS, DuranA.The antibacterial effect of silver anode treatment on raw milk. Food Biosci. 2022;50:102140. doi:10.1016/j.fbio.2022.102140
20.
KhanSA, JainM, PandeyA, . Leveraging the potential of silver nanoparticles-based materials towards sustainable water treatment. J Environ Manage2022;319:115675. doi:10.1016/j.jenvman.2022.115675.
21.
BarilloDJ, MarxDE.Silver in medicine: a brief history BC 335 to present. Burns. 2014;40:S3–S8. doi:10.1016/j.burns.2014.09.009
22.
PraveenAS, ArjunanA.Parametric optimisation of high-velocity oxy-fuel nickel-chromium-silicon-boron and aluminium-oxide coating to improve erosion wear resistance. Mater Res Express. 2019;6(9):0096560. doi:10.1088/2053-1591/ab301c
23.
PraveenAS, ArjunanA.High-temperature oxidation and erosion of HVOF sprayed NiCrSiB/Al2O3 and NiCrSiB/WC Co coatings. Appl Surf Sci Adv. 2022;7:100191. doi:10.1016/j.apsadv.2021.100191
24.
ArjunanA, BaroutajiA, RobinsonJ, . Smart tribological coating. In: OlabiA-G, editor. Encyclopedia of smart materials. Oxford: Elsevier; 2022. p. 414–425.
25.
XueJJ. Construction of high adhesion silicone coating and its biological fouling protection performance [Masters’ thesis]. Changchun: Jilin University, 2022.
26.
YiX. Tribology and corrosion properties of Al-and Nickel-based coatings enhanced by plasma spraying Al2O3/Al2O3-TiO2 [Masters’ thesis]. Harbin: Harbin Industrial University, 2013.
27.
MoskalG, NiemiecD, ChmielaB, . Microstructural characterization of laser-cladded NiCrAlY coatings on inconel 625 Ni-based superalloy and 316L stainless steel. Surf Coat Technol. 2020;387:125317. doi:10.1016/j.surfcoat.2019.125317
28.
GeorgeRP, MuraleedharanP, TamilvaniS, . Inhibition of manganese oxidising bacterial adhesion on pretreated stainless steel surfaces. Surf Eng. 2012;28(3):230–234. doi:10.1179/1743294411Y.0000000027
29.
VenzlaffH, EnningD, SrinivasanJ, . Accelerated cathodic reaction in microbial corrosion of iron due to direct electron uptake by sulfate-reducing bacteria. Corros Sci. 2013;66:88–96. doi:10.1016/j.corsci.2012.09.006
30.
HaoJ, XuJ, PengS, . Dissecting anticorrosion and antimicrobial potency of an Ag nanoparticle/NbC nanocomposite coating in a marine environment containing sulfate-reducing bacteria. ACS ES&T Eng. 2022;2(8):1386–1402. doi:10.1021/acsestengg.1c00485
31.
ZhuL, TangY, CaoS, . Enhanced anti-microbial corrosion of nano-CuO-loaded Ni coatings on pipeline steels in simulation environment of natural gas transportation pipeline. Ceram Int. 2023;49(3):5543–5549. doi:10.1016/j.ceramint.2022.11.220
32.
ChenJ, WuJ, WangP, . Corrosion of 907 steel influenced bySulfate-reducing bacteria. J Mater Eng Perform. 2019;28(3):1469–1479. doi:10.1007/s11665-019-03927-1
