The influence of Microarc Oxidation (MAO) modes of titanium substrate in electrolytes of the original composition is investigated. Used electrolytes no contain sodium silicate but includes nickel sulphate, sodium aluminate and alkali. The morphology and composition of the obtained coatings were studied by electron microscopy. The electrochemical behaviour was studied using polarisation curves and electrochemical impedance spectroscopy (EIS). Proposed Equivalent circuits are adequately corresponded to experimental EIS data with no more 6% error. The dependence between the elements of the Equivalent circuits and the morphological characteristics depending on the processing is considered. It is shown that MAO coatings on titanium have high corrosion resistance in an aggressive sulphuric acid. The electrochemical properties of coatings undergo irreversible changes in the direction of deterioration after anodic polarisation. It has been established that nickel doping of MAO coatings on titanium does not allow them to serve as anode materials.
SibumH, GütherV, RoidlO, . Titanium, titanium alloys, and titanium compounds. In: Ullmann's encyclopedia of industrial chemistry, Hoboken, NJ, USA
: Wiley-VHC; 2017, p. 4–6. doi:10.1002/14356007.a27_095.pub2
3.
VijayaramTR, NatarajanMP, RamaraoM, . Titanium and titanium alloys: advanced materials for engineering industries. Compl Eng J. 2021;12(10):116–127. https://www.researchgate.net/publication/355903268.
KornienkoGV, OrlinaEA, ChaenkoNV, . Electrochemical oxidation of phenol on a ruthenium-titanium oxide anode with the addition of reactive oxygen species generated in situ from molecular oxygen, hydrogen peroxide and water. JSiber Fed Univ. Chem. 2014;2:200–208.
12.
AliofkhazraeiM, MacdonaldDD, MatykinaE, . Review of plasma electrolytic oxidation of titanium substrates: mechanism, properties, applications and limitations. Appl Surf Sci Adv. 2021;5:1–67. doi:10.1016/j.apsadv.2021.100121
RamazanovaZ, KudasovaDK, ZamalitdinovaMG, . Review of technologies for obtaining coatings on titanium and its alloys by plasma electrolytic oxidation. Reliabil Qual. 2018;2:153–156.
15.
BelkinPN, BorisovAM, VasinVA, . Modern technologies of modification of a surface of materials and protective coating, Vol I. Renome: Moscow-StPetersburg; 2017, 648 p.
16.
RakochAG, DubAV, GladkovaAA.Anodization of light alloys under various electric modes. plasma-electrolytic nanotechnology. Moscow: Old Basmannaya; 2012, 469 p.
17.
GordienkoPS, GnedenkovSV.Microarc oxidation of titanium and its alloys. Dalnauka: Vladivostok; 1997. 186 p.
18.
LegostaevaEV, SharkeevYP, MattiasE, . Structure and properties of microarc calcium phosphate coatings on the surface of titanium and zirconium alloys. Russ Phys J. 2013;10:23–28.
19.
VasilyevaMS, RudnevVS, SklyarenkoOE.Titanium-Based nickel-copper oxide CO catalysts. Russ J Gen Chem. 2010;80(8):1247–1252.
20.
BogdashkinaNL, GerasimovMV, ZalavutdinovRH, . Influence of nickel sulfate additives to electrolytes subjected to microarc oxidation on the structure, composition, and properties of coatings formed on titanium. Surf Eng Appl Electrochem. 2018;54(4):331–337. doi:10.3103/S106837551804004X
21.
BorisovAM, KritBL, LyudinVB, . Microarc oxidation in slurry electrolytes: A review. Surf Eng Appl Electrochem. 2016;52(1):50–78. doi:10.3103/S106837551601004X
22.
KalubarmeRS, InamdarAI, BhangeDS, . Nickel-titanium oxide as a novel anode material for rechargeable sodium-ion batterie. J Mater Chem A. 2016;4:17419–17430.
23.
RossinaNG, PopovNA, ZhilyakovaMA, . Corrosion and protection of metals. Yekaterinburg: Ural University Publishing House; 2019.,108 p.
24.
McCaffertyE.Introduction to corrosion science. New York: Springer; 2010, 575 p. doi:10.1007/978-1-4419-0455-3
MacdonaldJR, BarsoukovE.Impedance spectroscopy: theory, experiment, and applications. 3rd ed. Hoboken: John Wiley & Sons Inc.; 2018, 560 p
27.
BobkovA, LuchininV, MoshnikovV, . Impedance spectroscopy of hierarchical porous nanomaterials based on por-Si, por-Si incorporated by Ni and metal oxides for Gas sensors. Sensors. 2022;22:1–14. doi:10.3390/s22041530
28.
ShcherbakovAI, KorostelevaIG, KasatkinaIV, . Impedance of aluminum electrode with nanoporous oxide. Protect Metal Phys Chem Surf. 2019;55(4):396–401.
29.
ShcherbakovAI, KorostelevaIG, KasatkinaIV, . Using frequency impedance spectroscopy to study the properties of cobalt-modified nanoporous alumina. Protec Metal Phys Chem Surf. 2020;56:288–294. doi:10.1134/S2070205120020227
30.
KasatkinVE, KornienkoLP, ShcherbakovAI, . Effect of sodium hydroxide concentration on nickel surface state: experience in EIS methods applying. Electrocatalysis. 2022;13:539–550. doi:10.1007/s12678-022-00735-5
31.
TomashovND, ChernovaGP.Theory of corrosion and corrosion-resistant constructional alloys. Metallurgy, Moscow, Russia. 1993: p. 18–23. ISBN 5-229-00923-3.
32.
FerrarisS, SprianoS.Porous titanium by additive manufacturing: A focus on surfaces for bone integration. Metals (Basel). 2021;11:1–12.
33.
LiY, ZhouQ, LiuM.Effect of novel surface treatment on corrosion behavior and mechanical properties of a titanium alloy. Baosteel Tech. Res. 2021;15:11–19.
34.
KaurM, SinghK.Review on titanium and titanium based alloys as biomaterials for orthopaedic applications. Mater. Sci. Eng. C. 2019;102:844–862.
35.
PrasadS, EhrensbergerM, GibsonMP, . Biomaterial properties of titanium dentistry. J. Oral Biosci. 2015;57:192–199.
36.
MashtalyarDV, NadaraiaKV, PleknovaNG.Antibacterial CaP-coatings formed on Mg alloy using plasma electrolytic oxidation and antibiotic impregnation. Mater Lett. 2022;317; doi:10.1016/j.matlet.2022.132099
37.
GrigorievS, PeretyaginN, ApelfeldA, . Investigation of MAO coatings characteristics on titanium products obtained by EBM method using additive manufacturing. Materials (Basel). 2022;15(13):1–11.
38.
GuoY, XuL, LuanJ, . Effect of carbon nanotubes additive on tribocorrosion performance of micro-arc oxidized coatings on Ti6Al4V alloy. Surf. Interfaces. 2022;28:101626.
39.
BogdashkinaNL, GerasimovMV, ZalavutdinovRK, . Influence of nickel sulfate additives to electrolytes subjected to microarc oxidation on the structure, composition and properties of coatings formed on titanium. Surf. Eng. Appl. Electrochem. 2018;54:331–337.
40.
ShokouhfarM, AllahkaramS.Effect of incorporation of nanoparticles with different composition on wear and corrosion behavior of ceramic coatings developed on pure titanium by micro arc oxidation. Surf. Coat.Technol. 2017;309:767–778.
41.
GaoY, YangW, XuD, . Microstructure and properties of graphene oxide-doped TiO2 coating titanium by micro Arc oxidation. J. Wuhan Univ. Technol.-Mat. Sci. Edit. 2018;33:1524–1529.
42.
WangJ, LiuL, YangM, . ; modification effect of graphene oxide oxidation coating of Ti-3Zr-2Sn-3Mo-25 Nb near-β titanium alloy. J. Alloys Compd. 2022;901:163561.
43.
MashtalyarDV, GnedenkovSV, SinebryukhovSL, . Plasma electrolytic oxidation of the magnesium alloy MA8 in electrolytes containing TiN nanoparticles. J. Mater. Sci. Technol. 2017;33(5):461–468.
44.
GerasimovMV, BogdashkinaNL.Method for processing titanium and its alloys in order to increase its corrosion resistance and electrolyte for microarc oxidation of titanium and its alloys in order to increase corrosion resistance. Pat.RU2756672C1, Publication 2021-10-04.
45.
SibilevaSV, KozlovaLS.Review of technologies for obtaining coatings on titanium alloys by plasma electrolytic oxidation. Aviat Mater Techn. 2016;S2(44):3–10. doi:10.18577/2071-9140-2016-0-S2-3-10
46.
BorisovAM, EfremovAP, KuleshovEA, . Evolution of dynamic VAC discharge in a metal-oxide-electrolyte system. Bullet Russian Acad Sci: Phys. 2002;66(8):1187–1191.
47.
KhoshnawF, GubnerR.Corrosion atlas case studies, part I: general aspects of corrosion, corrosion control, and corrosion prevention. Elsevier; 2022. xxv–xlii, doi:10.1016/C2020-0-00630-4
48.
GnedenkovSV, SinebryukhovSL.Structure and morphological features of layers formed on the surface of titanium. Corros: Mater, Protec. 2004;2:2–8.
McCannJF, BadwalSPS.Equivalent circuit analysis of the impedance response of semiconductor/electrolyte/counterelectrode cells. J. Electrochem Soc. 1982;129(3):551–559.
51.
UksheEA, GrafovBM.Electrochemical circuits of alternating current. Moscow: Nauka; 1973. 128 p.
