Pd–Ag alloy electrodeposit was proposed as a protective coating for electrical contacts. Before Pd alloy deposition, Ni was electroplated on a Cu substrate to limit Cu diffusion into the Pd coating. Pd–Ag alloy coatings with different Ag content were obtained using electrodeposition. Ag atomic per cent in the coatings was changed by varying the Ag mass concentration in the bath solution. Subsequently, the coated substrate experienced heat treatment at 260°C for 600 s. The contact resistance of the Pd-based coatings decreased along with the increase in the Ag content, but that of heated coatings increased. Furthermore, the wettability of the Pd-based coatings with solder was enhanced owing to the increase in Ag quantity. The qualitative analysis indicated that Pd–Ag coatings inhibited Ni diffusion to the surface, which would be oxidized during heat treatment, diminishing contact resistance and wettability.
CherevkoS, ZeradjaninAR, KeeleyGP, A comparative study on gold and platinum dissolution in acidic and alkaline media. J Electrochem Soc. 2014;161(12):H822–H830. DOI:10.1149/2.0881412jes
2.
GiurlaniW, MarcantelliP, BenelliF, Corrosion resistance test of electroplated gold and palladium using fast electrochemical analysis. Coatings. 2019;9(6):1–10. DOI:10.3390/COATINGS9060405
3.
LilleH, KõoJ, RyabchikovA, Relaxation of residual stresses in brush-plated gold and silver coatings on copper and on brass substrates. Adv Mat Res. 2014;996:866–871. DOI:10.4028/www.scientific.net/AMR.996.866
4.
GoodmanP.Current and future uses of gold in electronics. Gold Bull. 2002;35(1):21–26. DOI:10.1007/BF03214833
5.
ChristieIR, CameronBP.Gold electrodeposition within the electronics industry. Gold Bull. 1994;27(1):12–20. DOI:10.1007/BF03214728
6.
OkinakaY, HoshinoM.Some recent topics in gold plating for electronics applications. Gold Bull. 1998;31(1):3–13. DOI:10.1007/BF03215469
LiuCY, LiJ, VandentopGJ, Wetting reaction of Sn-Ag based solder systems on Cu substrates plated with Au and/or Pd layer. J Electron Mater. 2001;30(5):521–525. DOI:10.1007/S11664-001-0092-1
9.
TangJ, ZhaoX, ZuoY, Electrodeposited Pd-Ni-Mo film as a cathode material for hydrogen evolution reaction. Electrochim Acta. 2015;174:1041–1049. DOI:10.1016/j.electacta.2015.06.134
ZhangZ, TangJ, WangY, Electrodeposition of A novel Pd-Ni-W ternary alloy film on SS316L. Int J Electrochem Sci. 2017;12:6180–6189. DOI:10.20964/2017.07.39
12.
ZhangH, LiY, ZuoY, Electrodeposition of multi-layer Pd–Ni coatings on 316L stainless steel and their corrosion resistance in hot sulfuric acid solution. Trans Nonferrous Met Soc China. 2017;27(7):1543–1550. DOI:10.1016/S1003-6326(17)60175-4
13.
RevathyTA, DhanapalK, DhanavelS, Pulsed electrodeposited dendritic Pd-Ni alloy as a magnetically recoverable nanocatalyst for the hydrogenation of 4-nitrophenol. J Alloys Compd. 2018;735:1703–1711. DOI:10.1016/j.jallcom.2017.11.264
14.
ZhangXL, XieXF, HuangY.Pure Ni and Pd-Ni alloy membranes prepared by electroless plating for hydrogen separation. Adv Mater Res. 2011;179–180:1309–1313. DOI:10.4028/www.scientific.net/AMR.179-180.1309
15.
ChangC, HsiehM, KangW, Study of the co-electrodeposited Pd-Ni Alloy thin film and its performance on ethanol electro-oxidation. J Electrochem Soc. 2014;161(10):D552–D557. DOI:10.1149/2.0911410jes
16.
UsgaocarAR, de GrootCH.The electrodeposition, magnetic and electrical characterisation of palladium–nickel alloys. J Electroanal Chem. 2011;655(1):87–91. DOI:10.1016/j.jelechem.2011.02.001
17.
WangG, LiD, ZuoY, The improvement of hardness and corrosion resistance of electroplated Pd-Ni film on 316L stainless steel by CeCl3. Coatings. 2020;10(2):161. DOI:10.3390/coatings10020161
18.
HuangHY, ChenPY.Voltammetric behavior of Pd(II) and Ni(II) ions and electrodeposition of PdNi bimetal in N-butyl-N-methylpyrrolidinium dicyanamide ionic liquid. Electrochim Acta. 2011;56(5):2336–2343. DOI:10.1016/j.electacta.2010.11.042
19.
SumrunronnasakS, TantayanonS, KiatgamolchaiS.Influence of layer compositions and annealing conditions on complete formation of ternary PdAgCu alloys prepared by sequential electroless and electroplating methods. Mater Chem Phys. 2017;185:98–103. DOI:10.1016/j.matchemphys.2016.10.010
20.
MaY, TangC, BaoF, Microstructural investigation and on-site repair of thin pd-ag alloy membranes. Membranes. 2020;10(12):1–12. DOI:10.3390/membranes10120384
21.
LeeJH, HanJY, KimKM, Development of homogeneous Pd-Ag alloy membrane formed on porous stainless steel by multi-layered films and Ag-upfilling heat treatment. J Memb Sci. 2015;492:242–248. DOI:10.1016/j.memsci.2015.04.029
22.
KimJ, ParkJE, MommaT, Synthesis of Pd-Sn nanoparticles by ultrasonic irradiation and their electrocatalytic activity for oxygen reduction. Electrochim Acta. 2009;54(12):3412–3418. DOI:10.1016/j.electacta.2008.12.054
23.
YueJP, YangFZ, TianZQ, Effects of nickel ion contents on electrodeposition, composition, structure and properties of palladium-nickel alloys. Trans Inst Met Finish. 2011;89(5):249–254. DOI:10.1179/174591911X13082997023954
24.
ManolovaM, BöckR, ScharfI, Pulse plating of Pd–Ag alloy films from deep eutectic solvents. Surf Eng. 2019;35(12):1081–1087. DOI:10.1080/02670844.2019.1639320
25.
GhoshG, KantnerC, OlsonGB.Thermodynamic modeling of the Pd-X (X = Ag, Co, Fe, Ni) systems. J Phase Equilib. 1999;20(3):295–308. DOI:10.1361/105497199770335811
McBrideJ. W, YunusE. M, SpearingS. M.Improving the contact resistance at low force using gold coated carbon nanotube surfaces. The European Physical Journal Applied Physics. 2010;50(1):12904. http://dx.doi.org/10.1051/epjap/2010019
28.
WidayatnoT.Electrochemical polarisation behaviour of palladium electrolyte in a mixed system of Pd/Ni/Cu. AIP Conf. Proc. 2018;1977(1):030045. DOI:10.1063/1.5042965
29.
BeattieIR, HaverkampRG.Silver and gold nanoparticles in plants: sites for the reduction to metal. Metallomics. 2011;3(6):628–632. DOI:10.1039/C1MT00044F
OliveiraMC, RegoR, FernandesLS, Evaluation of the catalytic activity of Pd-Ag alloys on ethanol oxidation and oxygen reduction reactions in alkaline medium. J Power Sources. 2011;196(15):6092–6098. DOI:10.1016/j.jpowsour.2011.03.062
LaurilaT, VuorinenV, KivilahtiJK.Interfacial reactions between lead-free solders and common base materials. Mater Sci Eng R Rep. 2005;49(1–2):1–60. DOI:10.1016/j.mser.2005.03.001
34.
ArgibayN, BrumbachMT, DuggerMT, Grain boundary diffusivity of Ni in Au thin films and the associated degradation in electrical contact resistance due to surface oxide film formation. J Appl Phys. 2013;113(11):114906. DOI:10.1063/1.4795768
35.
PinnelMR, TompkinsHG, HeathDE.Oxidation of nickel and nickel-gold alloys in air at 50°–150°C. J Electrochem Soc. 1979;126(7):1274–1281. DOI:10.1149/1.2129256
36.
TompkinsHG, PinnelMR.Relative rates of nickel diffusion and copper diffusion through gold. J Appl Phys. 1977;48(7):3144–3146. DOI:10.1063/1.324045
37.
ParkJ, BaeSH, SonI.Improved contact resistance and solderability of electrodeposited Au-Sn alloy layer with high thermal stability for electronic contacts. Appl Surf Sci. 2021;551:149405. DOI:10.1016/j.apsusc.2021.149405
