13Cr–4Ni and 16Cr–5Ni martensitic stainless steels are boronized at 900°C, 950°C and 1000°C for 2, 4, 6, 8 h using powder pack boronizing followed by tempering at 600°C for 2 h. Boronized layer morphology, composition and case depth are studied using optical microscopy, XRD, XPS and SEM. The influence of temperature and duration of boronizing on the growth kinetics of boronized layer is studied. Higher alloy content of 16Cr–5Ni MSS resulted in higher activation energy of boronizing, limiting the attainable case depth. Higher boronizing temperatures produced additional borides besides iron borides that increased hardness and decreased ductility, strain energy density and fracture toughness. Identified boronizing parameters could be useful in enhancing the performance of these grades in hydraulic machinery.
SyamsundarC, ChatterjeeD, KamarajM.Experimental characterization of silt erosion of 16Cr–5Ni steels and prediction using artificial neural network. Trans Indian Inst Met. 2015;68(4):587–599.
SinghD, GateyAM, RupeshSD, Surface treatment response of AISI 2205 and AISI 304L steels: SMAT and plasma-nitriding. Surf Engg. 2019;35(3):205–215.
4.
TurkogluT, AyI.Investigation of mechanical, kinetic and corrosion properties of borided AISI 304, AISI 420 and AISI 430. Surf Eng. 2021;37:1–12.
5.
KulkaM.Engineering materials: Springer Nature Switzerland AG: Springer International Publishing; Cham; 2019; Current trends in boriding: techniques. 1–282.
6.
García-LeonRA, Martínez-TrinidadJ, Campos-SilvaI, Development of tribological maps on borided AISI 316L stainless steel under ball-on-flat wet sliding conditions. Tribol Int. 2021;163:107161.
7.
KeddamM, ChegrouneR, KulkaM, Characterization and diffusion kinetics of the plasma paste borided AISI 440C steel. Trans Indian Inst Met. 2017;70(5):1377–1385.
8.
MannBS.Boronizing of cast martensitic chromium nickel stainless steel and its abrasion and cavitation-erosion behaviour. Wear. 1997;208(1–2):125–131.
9.
JoshiAA, HosmaniSS.Pack-boronizing of AISI 4140 steel: boronizing mechanism and the role of container design. Mater Manuf Process. 2014;29(9):1062–1072.
10.
SedighiM, RastegariS.Studying simultaneous borochromised coatings on low carbon steel. Can Metall Q. 2022; 61(3): 1–9.
11.
GünenA, KeddamM, Microstructural characterization, boriding kinetics and tribo-wear behavior of borided Fe-based A286 superalloy. Mater Charact. 2022;186:111778.
12.
Hernández-SánchezE, VelázquezJC, Castrejón-FloresJL, Tribological behavior of borided AISI 316L steel with reduced friction coefficient and enhanced wear resistance. Mater Trans. 2019;60(1):156–164.
