In the present study, UHMWPE (Ultra High Molecular Weight Polyethylene)- 0.5, 1 and 2 wt-% Hap (hydroxyapatite) composite film coatings on Ti6Al4V alloy were produced by dip coating method. Homogeneous dispersion of Hap particles was detected by SEM (Scanning Electron Microscope) and FE-SEM (Field Emission Scanning Electron Microscope). The characteristic absorption peaks of Hap are observed by FTIR (Fourier Transform Infrared Spectroscopy). Hap addition caused the increment of the crystallinities of composites from 24.6% to 56.8% related with the increment of the melting temperatures. Composite coatings showed excellent wear resistance with the decreasing worn area of 96% and the friction coefficient of 97%, compared to the uncoated Ti6Al4V. The biocompatibility and wettability tests of all coated surfaces were performed. It is foreseen that UHMWPE/2wt-%Hap composite film coating on Ti6Al4V will be promising for Hip joint prosthesis.
GhoshS, AbanteribaS.Status of surface modification techniques for artificial hip implants. Sci Technol Adv Mater. 2016;17:715–735. doi:10.1080/14686996.2016.1240575
5.
HeDH, WangP, LiuP, HA coating fabricated by electrochemical deposition on modified Ti6Al4V alloy. Surf. Coatings Technol. 2016;301:6–12. doi:10.1016/j.surfcoat.2016.07.005
6.
PanjwaniB, SatyanarayanaN, SinhaSK.Tribological characterization of a biocompatible thin film of UHMWPE on Ti6Al4V and the effects of PFPE as top lubricating layer. J Mech Behav Biomed Mater. 2011;4:953–960. doi:10.1016/j.jmbbm.2011.02.005
7.
BigdeliI, Haft AsiaMN, Miladi-GorjiH, Surface modification of titanium, titanium alloys, and related materials for biomedical applications. Mater Sci Eng R. 2004;47:49–121. doi:10.1016/j.mser.2004.11.001
8.
EliasCN, LimaJHC, ValievR, Biomedical applications of titanium and its alloys. Jom. 2008;60:46–49. doi:10.1007/s11837-008-0031-1
9.
CelyMM, ToroA, EstupiñanH, Microstructure characterization and tribological behavior of anodized ti6al4v alloy. Ing y Compet. 2014;16:295–305.
10.
WangG, LiJ, LvK, Surface thermal oxidation on titanium implants to enhance osteogenic activity and in vivo osseointegration. Sci Rep. 2016;6:1–13. doi:10.1038/srep31769
11.
VeraML, RosenbergerMR, SchvezovCE, Fabrication of TiO2 crystalline coatings by combining Ti-6Al-4V anodic oxidation and heat treatments. Int J Biomater. 2015;2015:1–9. doi:10.1155/2015/395657
12.
WangK, XiongD, DengY, Ultra-lubricated surface of Ti6Al4V fabricated with combination of porous TiO2 layer, ultra-high molecular weight polyethylene film and hydrophilic polymer brushes. Mater Des. 2017;114:18–24. doi:10.1016/j.matdes.2016.10.032
13.
MinnM, SinhaSK.DLC and UHMWPE as hard / soft composite film on Si for improved tribological performance. Surf Coat Technol. 2008;202:3698–3708. doi:10.1016/j.surfcoat.2008.01.012
14.
ValenzaA, ViscoAM, TorrisiL, Characterization of ultra-high-molecular-weight polyethylene (UHMWPE) modified by ion implantation. Polymer (Guildf. 2004;45:1707–1715. doi:10.1016/j.polymer.2003.12.056
15.
ChangB-PMD, AkilH R, Comparative study of micro- and nano-ZnO reinforced UHMWPE composites under dry sliding wear. Wear. 2013;297:1120–1127. doi:10.1016/j.wear.2012.11.083
16.
RamakrishnaS, MayerJ, WintermantelE, Biomedical applications of polymer-composite materials: a review. Compos Sci Technol. 2001;61:1189–1224.
CohenY., ReinD. M., & VaykhanskyL. Departmenty. A novel composite based on ultra-high-molecular-weight polyethylene. Compos Sci Technol. 1997;3538:1149–1154.
19.
LiuJ, ZhuY, WangQ, Biotribological behavior of ultra high molecular weight polyethylene composites containing bovine bone hydroxyapatite. J China Univ Min Technol. 2008;18:606–612. doi:10.1016/S1006-1266(08)60303-X
20.
PangW, NiZ, ChenG, Mechanical and thermal properties of graphene oxide/ultrahigh molecular weight polyethylene nanocomposites. RSC Adv. 2015;5:63063–63072. doi:10.1039/c5ra11826c
21.
AoikeT, YokoyamaD, UeharaH, Tribology of ultra-high molecular weight polyethylene disks molded at different temperatures. Wear. 2007;262:742–748. doi:10.1016/j.wear.2006.08.006
22.
Gonzalez-MoraV, HoffmannM, ChiesaR, Screening wear tester versus hip joint simulator: results of UHMWPE sliding against different CoCrMo counterfaces. Surf Eng. 2003;19:45–50. doi:10.1179/026708403225002478
23.
EpsteinNJ, BraggWE, MaT, UHMWPE wear debris upregulates mononuclear cell proinflammatory gene expression in a novel murine model of intramedullary particle disease. Acta Orthop. 2005;76:412–420. doi:10.1080/17453670510041321
24.
PietrzakWS.Ultra-high molecular weight polyethylene for total Hip acetabular liners: a brief review of current status. J Investig Surg. 2021;34:321–323. doi:10.1080/08941939.2019.1624898
25.
GuofangG, HuayongY, XinF.Tribological properties of kaolin filled UHMWPE composites in unlubricated sliding. Wear. 2004;256:88–94. doi:10.1016/S0043-1648(03)00394-6
26.
FangL, LengY, GaoP.Processing of hydroxyapatite reinforced ultrahigh molecular weight polyethylene for biomedical applications. Biomaterials. 2005;26:3471–3478. doi:10.1016/j.biomaterials.2004.09.022
27.
TongJ, MaY, JiangM.Effects of the wollastonite fiber modification on the sliding wear behavior of the UHMWPE composites. Wear. 2003;255:734–741. doi:10.1016/S0043-1648(03)00221-7
28.
MacuveleDLP, NonesJ, MatsinheJV, Advances in ultra high molecular weight polyethylene/hydroxyapatite composites for biomedical applications: A brief review. Mater Sci Eng C. 2017;76:1248–1262. doi:10.1016/j.msec.2017.02.070
29.
fang AnM, jun XuH, LvY, The influence of chitin nanocrystals on structural evolution of ultra-high molecular weight polyethylene/chitin nanocrystal fibers in hot-drawing process. Chin J Polym Sci. (English Ed. 2016;34:1373–1385. doi:10.1007/s10118-016-1843-z
30.
KongY, HayJN.The measurement of the crystallinity of polymers by DSC. Polymer (Guildf). 2002;43:3873–3878.
31.
SenatovFS, BaranovAA, MuratovDS, Microstructure and properties of composite materials based on UHMWPE after mechanical activation. J Alloys Compd. 2015;615:S573–S577. doi:10.1016/j.jallcom.2013.12.175
32.
MaksimkinAV, NematulloevSG, ChukovDI, Bulk oriented UHMWPE/FMWCNT films for tribological applications. Polymers (Basel). 2017;9:1–12. doi:10.3390/polym9110629
33.
FengM, LiW, LiuX, Copper-polydopamine composite coating decorating UHMWPE fibers for enhancing the strength and toughness of rigid polyurethane composites. Polym Test. 2021;93:106883, doi:10.1016/j.polymertesting.2020.106883
34.
WhitesidesGM, WongAP.The intersection of biology and materials science. MRS Bull. 31;2006:19–27. doi:10.1557/mrs2006.2
35.
Peng ChangB, Md AkilH, Bt NasirR, Optimization on wear performance of UHMWPE composites using response surface methodology. Tribol Int. 2015;88:252–262. doi:10.1016/j.triboint.2015.03.028
36.
ZhenhuaL, YunxuanL.Mechanical and tribological behaviour of UHMWPE/HDPE blends reinforced with SBS. Polym - Plast Technol Eng. 2012;51:750–753. doi:10.1080/03602559.2012.663039
37.
AliyuIK, SamadMA, Al-QutubA.Tribological characterization of a bearing coated with UHMWPE/GNPs nanocomposite coating. Surf Eng. 2021;37:60–69. doi:10.1080/02670844.2020.1754624
38.
TongJ, MaY, ArnellRD, Free abrasive wear behavior of UHMWPE composites filled with wollastonite fibers. Compos Part A: Appl Sci Manuf. 2006;37:38–45. doi:10.1016/j.compositesa.2005.05.023
39.
Kanaga KaruppiahKS, BruckAL, SundararajanS, Friction and wear behavior of ultra-high molecular weight polyethylene as a function of polymer crystallinity. Acta Biomater. 2008;4:1401–1410. doi:10.1016/j.actbio.2008.02.022
40.
Figueiredo-PinaCG, DearnleyPA.Influence of scratch damage to S phase coated and uncoated orthopaedic grade stainless steel on wear of ultrahigh molecular weight polyethylene. Surf Eng. 2012;28:683–692. doi:10.1179/1743294412Y.0000000022
41.
FanP, XuW, LuC, Improving the compatibility of polycarbonate/UHMWPE blends through gamma-ray irradiation. Int J Polym Anal Charact. 2006;11:429–440. doi:10.1080/10236660601001304
42.
GratielaT, DanielaM, GabrielaR, Effect of hydrophilic – hydrophobic balance on biocompatibility of poly (methyl methacrylate) (PMMA) – hydroxyapatite (HA) composites. Mater Chem Phys. 2009;118:265–269. doi:10.1016/j.matchemphys.2009.03.019
