Heat treatment of Hexa-Methylene Diamine Tetra-Methylene Phosphonic Acid (HMDTMPA) coating on biodegradable Mg to improve corrosion resistance and bioactivity
Restricted accessResearch articleFirst published online August, 2021
Heat treatment of Hexa-Methylene Diamine Tetra-Methylene Phosphonic Acid (HMDTMPA) coating on biodegradable Mg to improve corrosion resistance and bioactivity
Since the bioactive surface needs hydrophilic coating; and the high corrosion resistance needs a hydrophobic one, it is a challenge to design a bioactive film that exhibits corrosion protection. In this article, Hexa-Methylene Diamine Tetra-Methylene Phosphonic Acid (HMDTMPA) film was deposited on Mg substrate at different heat treatment conditions. The heat-treated films at 150°C showed remarkable anticorrosion performance about five times the non-heated film. In addition, bioactivity character such as live cells attraction was noticed due to the increase of P–O groups that compensated the decrease of O–H groups in the film structure. Through the post-heat treatment, we were able to provide a new insight towards understanding how particular functional groups (OH) can modify the organic coating quality. The master key here is the formation of a stable film of chloroapatite that plays dual functions to inhibit the corrosive ions penetration and improve the bioactivity to attract the living-cell.
TangX, ZhangX, ChenY, Ultraviolet irradiation assisted liquid phase deposited titanium dioxide (TiO2)-incorporated into phytic acid coating on magnesium for slowing-down biodegradation and improving osteo-compatibility. Mater Sci Eng: C. 2020;108:110487.
2.
StaigerMP, PietakAM, HuadmaiJ, Magnesium and its alloys as orthopedic biomaterials: a review. Biomaterials. 2006;27(9):1728–1734.
3.
ZhengYF, GuXN, WitteF.Biodegradable metals. Mater Sci Eng: R: Reports. 2014;77:1–34.
4.
DingY, WenC, HodgsonP, Effects of alloying elements on the corrosion behavior and biocompatibility of biodegradable magnesium alloys: a review. J Mater Chem B. 2014;2(14):1912–1933.
5.
WalkerJ, ShadanbazS, WoodfieldTB, Magnesium biomaterials for orthopedic application: a review from a biological perspective. J Biomed Mater Res B Appl Biomater. 2014;102(6):1316.
6.
Chang-Jiang PanL-QP, HouY, LinY-B, This research was supported by Sichuan Science and Technology Program. Appl Sci|31922017;7(1):33.
7.
ZhaoS, ChenY, LiuB, A dual-task design of corrosion-controlling and osteo-compatible hexamethylenediaminetetrakis- (methylene phosphonic acid) (HDTMPA) coating on magnesium for biodegradable bone implants application. J Biomed Mater Res A. 2015;103(5):1640–1652.
8.
Fernández-CalderónMC, Romero-GuzmánD, Ferrández-MonteroA, Impact of PLA/Mg films degradation on surface physical properties and biofilm survival. Colloids Surf B. 2020;185:110617.
9.
DilshadT, RahimSA, HanasT.This research was supported by Sichuan Science and Technology Program. Mater Res Express. 2019;6(11):1165b–11167.
10.
SolimanH, PuS, ZhangW, This research was supported by Sichuan Science and Technology Program. Surf Coat Technol. 2020: 126242.
11.
MakhloufASH, Abu-ThabitNY. Advances in smart coatings and thin films for future Industrial and Biomedical Engineering Applications. Elsevier; 2019.
12.
Abdal-HayA, HasanA, LeeM-H, Biocorrosion behavior of biodegradable nanocomposite fibers coated layer-by-layer on AM50 magnesium implant. Mater Sci Eng: C. 2016;58:1232–1241.
13.
ChembathM, BalarajuJN, SujataM.Effect of anodization and annealing on corrosion and biocompatibility of NiTi alloy. Surf Coat Technol. 2016;302:302–309.
14.
CabriniSLM, TestaC, PastoreT, 2019;305:459–466.
15.
TomozawaM, HiromotoS.Microstructure of hydroxyapatite- and octacalcium phosphate-coatings formed on magnesium by a hydrothermal treatment at various pH values. Acta Mater. 2011;59(1):355–363.
16.
RenX, TianZ, ZhangJ, This research was supported by Sichuan Science and Technology Program. Scr Mater.
17.
Bordbar-KhiabaniA, YarmandB, MozafariM.This research was supported by Sichuan Science and Technology Program. Mater Lett. 2019: 126779.
18.
YuQ, ZhaoC, ZhuQ, This research was supported by Sichuan Science and Technology Program. Thermochim Acta. 2020;686:178530.
19.
DevillersS, BarthélémyB, DelhalleJ, Induction heating vs conventional heating for the hydrothermal treatment of Nitinol and its subsequent 2-(Methacryloyloxy)ethyl 2-(trimethylammonio)ethyl phosphate coating by surface-initiated atom transfer radical polymerization. ACS Appl Mater Interfaces. 2011;3(10):4059–4066.
20.
JiangW, LiG, WuY, Effect of heat treatment on bonding strength of aluminum/steel bimetal produced by a compound casting. J Mater Process Technol. 2018;258:239–250.
21.
ByunJM, BangS-R, KimHW, Effect of heat treatment on corrosion resistance and adhesion property in Zn-Mg-Zn multi-layer coated steel prepared by PVD process. Surf Coat Technol. 2017;309:1010–1014.
22.
ZhangY, TangS, HuJ, Formation mechanism and corrosion resistance of the hydrophobic coating on anodized magnesium. Corros Sci. 2016;111:334–343.
23.
LiL, SwainGM.Effects of aging temperature and time on the corrosion protection provided by trivalent chromium process coatings on AA2024-T3. Appl Mater Interfaces. 2013;5(16):7923–7930.
24.
GundeP, FurrerA, HänziAC, The influence of heat treatment and plastic deformation on the bio-degradation of a Mg-Y-RE alloy, The Japanese Society for Biomaterials, and the Australian Society for Biomaterials and the Korean Society for Biomaterials. 2010;92(2):409–418.
25.
ZhangR, CaiS, XuG, Crack self-healing of phytic acid conversion coating on AZ31 magnesium alloy by heat treatment and the corrosion resistance. Appl Surf Sci. 2014;313:896–904.
26.
ZhouF, ZhangZ, LiuS, Effect of heat treatment and synergistic rare-earth modified NiCrAlY on bonding strength of nanostructured 8YSZ coatings. Appl Surf Sci. 2019;480:636–645.
27.
LiuK, ZhangM, ZhaiJ, Bioinspired construction of Mg–Li alloys surfaces with stable superhydrophobicity and improved corrosion resistance. Appl Phys Lett. 2008;92(18):183103.
28.
InsomphunC, ChuahJ-A, KobayashiS, Influence of hydroxyl groups on the cell viability of Polyhydroxyalkanoate (PHA) scaffolds for Tissue Engineering. ACS Biomater Sci Eng. 2017;3(12):3064–3075.
29.
ThevenotP, HuW, TangL.Surface chemistry influences implant biocompatibility. Curr Top Med Chem. 2008;8(4):270.
30.
GuXN, LiN, ZhouWR, Corrosion resistance and surface biocompatibility of a microarc oxidation coating on a Mg–Ca alloy. Acta Biomater. 2011;7(4):1880–1889.
31.
ZhangY, ForsythM, HintonBR.The effect of treatment temperature on corrosion resistance and hydrophilicity of an ionic liquid coating for Mg-based stents. ACS Appl Mater Interfaces. 2014;6(21):18989–18997.
32.
FrankelGS, SamaniegoA, BirbilisN.Evolution of hydrogen at dissolving magnesium surfaces. Corros Sci. 2013;70:104–111.
33.
Philadelphia, ASTM Standard G1-03. 2011 Annual Book of ASTM Standards 2011, 03.02.
34.
ZhangK, ChenJY, QinW, Constructing bio-layer of heparin and type IV collagen on titanium surface for improving its endothelialization and blood compatibility. J Mater Sci - Mater Med. 2016;27(4):81.
35.
VidalK, GómezE, GoitandiaAM, The synthesis of a superhydrophobic and thermal stable silica coating via sol-gel process. Coatings. 2019;9(10):627.
36.
ZhangM, CaiS, ShenS, In-situ defect repairing in hydroxyapatite/phytic acid hybrid coatings on AZ31 magnesium alloy by hydrothermal treatment. J Alloys Compd. 2016;658:649–656.
