In this work, the non-aqueous NH4F-EG electrolyte was utilized for plasma electrolytic oxidation (PEO) process on AZ91 alloy to fabricate MgF2-dominated coating at room temperature. Results revealed that the coating had a homogeneous composition and porous microstructure. Compared with the bare AZ91 samples, the coated samples showed a 109 mV nobler corrosion potential and two orders of magnitude lower corrosion current in neutral 3.5 wt% NaCl solution, while a 54 mV nobler corrosion potential and one orders of magnitude lower corrosion current in acidic 3.5 wt% NaCl solution (pH=3). Thus, it's unveiled a novel possibility to prepare non-oxide coating on Mg alloy by PEO process in non-aqueous electrolyte. And the MgF2 coating provided effective corrosion protection for Mg alloy both in neutral and acid corrosive media.
YouS, HuangY, KainerK, Recent research and developments on wrought magnesium alloys. J Magnes Alloy. 2017;5(3):239–253. doi: 10.1016/j.jma.2017.09.001
2.
ZengZ, StanfordN, ChristopherH, Magnesium extrusion alloys: a review of developments and prospects. Int Mater Rev. 2019;64(1):27–62. doi: 10.1080/09506608.2017.1421439
3.
KumarK, GillR, BatraU.Challenges and opportunities for biodegradable magnesium alloy implants. Mater Technol. 2018;33(2):153–172. doi: 10.1080/10667857.2017.1377973
4.
ShresthaS.Magnesium and surface engineering. Surf Eng. 2010;26(5):313–316. doi: 10.1179/026708410X12736782825894
5.
CaoF, SongG, AtrensA.Corrosion and passivation of magnesium alloys. Corros Sci. 2016;111:835–845. doi: 10.1016/j.corsci.2016.05.041
6.
GrayJE, LuanB.Protective coatings on magnesium and its alloys – a critical review. J Alloy Compd. 2002;336(1-2):88–113. doi: 10.1016/S0925-8388(01)01899-0
7.
DarbandG, AliofkhazraeiM, HamghalamP, Plasma electrolytic oxidation of magnesium and its alloys: mechanism, properties and applications. J Magnes Alloy. 2017;5(1):74–132. doi: 10.1016/j.jma.2017.02.004
8.
TuW, ChengY, WangX, Plasma electrolytic oxidation of AZ31 magnesium alloy in aluminate-tungstate electrolytes and the coating formation mechanism. J Alloy Compd. 2017;725:199–216. doi: 10.1016/j.jallcom.2017.07.117
9.
KossenkoA, ZinigradM.A universal electrolyte for the plasma electrolytic oxidation of aluminum and magnesium alloys. Mater Des. 2015;88:302–309. doi: 10.1016/j.matdes.2015.08.071
10.
WangP, GongZ, LiH, Effect of CoSO4 on the characteristics of micro-arc oxidation coatings. Surf Eng. 2020;36(2):216–224. doi: 10.1080/02670844.2019.1650468
11.
StojadinovićS, VasilićR, Radić-PerićJ, Characterization of plasma electrolytic oxidation of magnesium alloy AZ31 in alkaline solution containing fluoride. Surf Coat Technol. 2015;273:1–11. doi: 10.1016/j.surfcoat.2015.03.032
12.
LiuF, YuJ, SongY, Effect of potassium fluoride on the in-situ sealing pores of plasma electrolytic oxidation film on AM50 Mg alloy. Mater Chem Phys. 2015;162:452–460. doi: 10.1016/j.matchemphys.2015.06.014
13.
DongH, MaY, WangS, Effect of potassium fluoride on growth and microstructure of MAO coatings on AZ91D magnesium alloys. Rare Metal Mater Eng. 2018;47(1):249–254. (in Chinese)
14.
SunR, LiuP, ZhangR, Hydrothermal synthesis of microstructured fluoridated hydroxyapatite coating on magnesium alloy, Surf Eng. 2016;32(11):879–884. doi: 10.1080/02670844.2016.1194511
15.
WhiteL, KooY, NerallaS, Enhanced mechanical properties and increased corrosion resistance of a biodegradable magnesium alloy by plasma electrolytic oxidation (PEO). Mater Sci Eng B. 2016;208:39–46. doi: 10.1016/j.mseb.2016.02.005
16.
DouJ, ChenY, YuH, Research status of magnesium alloys by micro-arc oxidation: a review. Surf Eng. 2017;33(10):731–738. doi: 10.1080/02670844.2017.1278642
17.
SolimanH, HamdyA.Effect of fluoride ions modifier and ceramic Al2O3 particles additives on plasma electrolytic oxidation of AZ31, Surf Eng. 2017;33(10):767–772. doi: 10.1080/02670844.2016.1214407
18.
RazaviM, FathiM, SavabiO, Biodegradable magnesium alloy coated by fluoridated hydroxyapatite using MAO/EPD technique, Surf Eng, 2014;30(8):545–551. doi: 10.1179/1743294414Y.0000000284
19.
SobolevA, WolickiI, KossenkoA, Coating formation on Ti-6Al-4V alloy by micro Arc oxidation in molten Salt. Materials (Basel). 2018;11(9):1611. doi: 10.3390/ma11091611
20.
SobolevA, KossenkoA, ZinigradM, Comparison of plasma electrolytic oxidation coatings on Al alloy created in aqueous solution and molten salt electrolytes. Surf Coat Technol. 2018;344:590–595. doi: 10.1016/j.surfcoat.2018.03.091
21.
JiangH, WuG, LeeS, Achieving controllable degradation of a biomedical magnesium alloy by anodizing in molten ammonium bifluoride. Surf Coat Technol. 2017;313:282–287. doi: 10.1016/j.surfcoat.2017.01.090
22.
LiQ, ZhuP, ChenS, In vitro study on degradation of AZ31B magnesium alloy with fluoride conversion coating. Mater Technol. 2017;32(7):409–414. doi: 10.1080/10667857.2016.1262311
23.
SaranyaK, KalaiyarasanM, ChatterjeeS, Dynamic electrochemical impedance study of fluoride conversion coating on AZ31 magnesium alloy to improve bio-adaptability for orthopedic application. Mater Corros. 2019; 70: 698–710. doi: 10.1002/maco.201810360
24.
NarayananT, ParkI, LeeM, Tailoring the composition of fluoride conversion coatings to achieve better corrosion protection of magnesium for biomedical applications. J Mater Chem B. 2014;2(21):3365–3382. doi: 10.1039/C3TB21565B
25.
DongK, SongY, ShanD, Formation mechanism of a self-sealing pore micro-arc oxidation film on AM60 magnesium alloy. Surf Coat Technol. 2015;266:188–196. doi: 10.1016/j.surfcoat.2015.02.041
26.
MoudlerJ, StickleW, SobolP, Handbook of X-ray photoelectron spectroscopy. Eden Prairie
: Perkin-Elmer; 1992.
