Biomedical implants are immensely manoeuvered devices that fix various deformities and injuries on medical grounds. With an emergent exploration in this field by researchers, countless combinations of materials have been discovered that perks global mankind. The ultimate goal of this experimentation is to appraise the characteristics of wear and corrosion resistance of Ti–Co–Cr-coated 316L grade austenitic stainless steel (SS) in contrast with TiN-coated and uncoated 316L SS. A micro-abrasion test was conducted on every single sample at 3N, 5N and 7N loads and were characterized in accordance with weight loss, coefficient of friction, surface roughness, Scanning Electron Microscope (SEM) analysis, X-ray Diffraction pattern (XRD), Energy Dispersive X-Ray Analysis (EDAX), Fourier-transform infrared spectroscopy (FTIR) and corrosion resistance. The findings showed that Ti–Co–Cr-coated substrate at 3N load have good mechanical tolerance and offers admirable performance. The corrosion resistance of the specimens divulges the biocompatibility of Ti–Co–Cr as being more distinct because of the existence of titanium metal.
GuzmánP, YateL, SandovalM, Characterization of the micro-abrasive wear in coatings of TaC-HfC/Au for biomedical implants. Materials. 2017;10:842. doi: 10.3390/ma10080842
3.
LiuF, XuJL, YuDZ, Wear resistance of micro-arc oxidation coatings on biomedical NiTi alloy. J Alloys Compd. 2009;487:391–394. doi: 10.1016/j.jallcom.2009.07.145
4.
YildizF, YetimAF, AlsaranA, Wear and corrosion behaviour of various surface treated medical grade titanium alloy in bio-simulated environment. Wear. 2009;267:695–701. doi: 10.1016/j.wear.2009.01.056
5.
ZhangE, LiuC.Effect of surface treatments on the surface morphology, corrosion property, and antibacterial property of Ti–10Cu sintered alloy. Biomed Mater. 2015;10:045009. doi: 10.1088/1748-6041/10/4/045009
6.
ChauhanSR, DassK.Dry sliding wear behaviour of titanium (Grade 5) alloy by using response surface methodology. Adv Tribol. 2013;2013:1–9. doi: 10.1155/2013/272106
7.
ManiG, FeldmanMD, OhS, Surface modification of cobalt–chromium–tungsten–nickel alloy using octadecyltrichlorosilanes. Appl Surf Sci. 2009;255:5961–5970. doi: 10.1016/j.apsusc.2009.01.046
SivakumarM, MudaliUK, RajeswariS.In vitro electrochemical investigations of advanced stainless steels for applications as orthopaedic implants. J Mater Eng Perform. 1994;3:744–753. doi: 10.1007/BF02818375
15.
SilverFH, DoillonC.Biocompatibility. Interactions of biological and implantable materials. New York
: VCH Publ, Inc.; 1989.
16.
KamachimudaliU, SridharTM, RajB.Corrosion of bio implants. Sadhana. 01 6 2003; 28:601–637. doi: 10.1007/BF02706450
17.
IshfaqK, AhmadN, JawadM, Evaluating material's interaction in wire electrical discharge machining of stainless steel (304) for simultaneous optimization of conflicting responses. Materials. 2019;12(12):1–15. doi: 10.3390/ma12121940
18.
AriasDF, ArangoYC, DeviaA.Study of TiN and ZrN thin films grown by cathodic arc technique. Appl Surf Sci. 2006;253:1683–1690. doi: 10.1016/j.apsusc.2006.03.017
19.
SatouM, AndohY, OgataK, Coating films of titanium nitride prepared by ion and vapor deposition method. Jpn J Appl Phys. 1985;24:656. doi: 10.1143/JJAP.24.656
20.
BrownIG.Cathodic arc deposition of films. Annu Rev Mater Sci. 1998;28:243–269. doi: 10.1146/annurev.matsci.28.1.243
21.
UnalO, MitchellTE, HeuerAH.Microstructures of Y2O3-stabilized ZrO2 electron beam-physical vapor deposition coatings on Ni-base Superalloys. J Am Ceram Soc. 1994;77:984–992. doi: 10.1111/j.1151-2916.1994.tb07256.x
22.
PlankRV, WeiY, DiNardoNJ, Characterization of highly conducting, ultra-thin polyaniline films produced by evaporative deposition. Chem Phys Lett. 1996;263:33–38. doi: 10.1016/S0009-2614(96)01171-2
23.
PorterHL, MionC, CaiAL, Growth of ZnO films on C-plane (0 0 0 1) sapphire by pulsed electron deposition (PED). Mater Sci Eng: B. 2005;119:210–212. doi: 10.1016/j.mseb.2005.02.042
24.
ChiouW-T, WuW-Y, TingJ-M.Growth of single crystal ZnO nanowires using sputter deposition. Diam Relat Mater. 2003;12:1841–1844. doi: 10.1016/S0925-9635(03)00274-7
25.
ArunkumarP, RamaseshanR, DashS, Texturing of pure and doped CeO 2 thin films by EBPVD through target engineering. RSC Adv. 2014;4:33338–33346. doi: 10.1039/C4RA04353G
26.
LiD, LerouxP.
Block on ring sliding wear evaluation; 2016.
27.
PriyanMS, HariharanP.Abrasive wear modes in ball-cratering test conducted on Fe 73 Si 15 Ni 10 Cr 2 alloy deposited specimen. Tribol Ind. 2014;36:97–106.
28.
LiCX, BellT.Corrosion properties of active screen plasma nitrided 316 austenitic stainless steel. Corros Sci. 2004;46:1527–1547. doi: 10.1016/j.corsci.2003.09.015
29.
PriyanMS, HariharanP.Wear and corrosion resistance of Fe based coatings by HVOF sprayed on Gray cast-iron for automotive application. Tribol Ind. 2014;36:394–405.
30.
RatnerBD, HoffmanAS, SchoenFJ, Biomaterials science: an introduction to materials in medicine. USA
: Elsevier; 2004.
31.
KereiakesDJ, CoxDA, HermillerJB, Usefulness of a cobalt chromium coronary stent alloy. Am J Cardiol. 2003;92:463–466. doi: 10.1016/S0002-9149(03)00669-6
32.
El-TayebNSM, YapTC, BrevernPV.Wear characteristics of titanium alloy Ti54 for cryogenic sliding applications. Tribol Int. 2010;43:2345–2354. doi: 10.1016/j.triboint.2010.08.012
33.
TomlinsonGA.CVI. A molecular theory of friction. The London, Edinburgh, Dublin Philos Mag J Sci. 1929;7:905–939. doi: 10.1080/14786440608564819
34.
DuongCT, NamJS, SeoEM, Tribological property of the cobalt—chromium femoral head with different regions of wear in total hip arthroplasty. Proc Inst Mech Eng, Part H: J Eng Med. 2010;224:541–549. doi: 10.1243/09544119JEIM709
35.
AliM, HamzahE, Radzi ToffM.Friction coefficient and surface roughness of TiN-coated HSS deposited using cathodic arc evaporation PVD technique. Ind Lubr Tribol. 2008;60:121–130. doi: 10.1108/00368790810871048
36.
De JagerN, FeilzerAJ, DavidsonCL.The influence of surface roughness on porcelain strength. Dent Mater. 2000;16:381–388. doi: 10.1016/S0109-5641(00)00030-0
37.
RihanRO.Electrochemical corrosion behavior of X52 and X60 steels in carbon dioxide containing saltwater solution. Mater Res. 2013;16:227–236. doi: 10.1590/S1516-14392012005000170
38.
NarayananR, SeshadriSK, KwonTY, Calcium phosphate-based coatings on titanium and its alloys. J Biomed Mater Res Part B: Appl Biomater. 2008;85:279–299. doi: 10.1002/jbm.b.30932
39.
MattoxDM.Handbook of physical vapor deposition (PVD) processing. UK
: William Andrew [u.a]; 2010.
