In this study, superhydrophobic surfaces were fabricated using 1H,1H,2H,2H-perfluorooctyltriethoxysilane monolayer deposition on thermally oxidized brass. The superhydrophobic surface showed a contact angle (CA) of 155° with a CA hysteresis of 3.5°. The corrosion behaviour of developed superhydrophobic surface was evaluated using potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) studies in 3.5% NaCl solution. The superhydrophobic surface showed exceptional corrosion behaviour with nearly 21 times higher corrosion resistance compared to as-received (AS) brass. The EIS analysis suggests the presence of Warburg impedance in the AS brass indicating diffusion phenomena, while superhydrophobic brass surface showed a reversed loop in the low-frequency spectra, signifying significantly delayed kinetics of the electrochemical system. The study provides a facile, promising means of developing highly corrosion-resistant surfaces in engineering materials.
KimJ-B, KimJ-K, KimH, Inhibitory effect of metal surface on the antimicrobial resistance microorganism. Ann. Clin. Microbiol.2018. doi: 10.5145/acm.2018.21.4.80
2.
DavisJR.ASM Specialty Handbook: Copper and Copper Alloys. Materials Park (OH
): ASM International; 2001.
3.
NyongAE.Superhydrophobicity and underwater superoleophobicity of oxidized surfaces of some copper alloys. 2013, No. December.
4.
YangC, ZhaoYJ, KangLM, High-strength silicon brass manufactured by selective laser melting. Mater Lett. 2018. doi: 10.1016/j.matlet.2017.09.011
5.
ZhouP, HutchisonMJ, ScullyJR, The anodic dissolution of copper alloys: Pure copper in synthetic tap water. Electrochim Acta. 2016. doi: 10.1016/j.electacta.2016.01.093
6.
MohamedAMA, AbdullahAM, YounanNA.Corrosion behavior of superhydrophobic surfaces: A review. Arabian J Chem. 2015. doi: 10.1016/j.arabjc.2014.03.006
7.
XiaoF, YuanS, LiangB, Superhydrophobic CuO nanoneedle-covered copper surfaces for Anticorrosion. J Mater Chem A. 2015. doi: 10.1039/c4ta05730a
8.
LvY, LiuM.Corrosion and fouling behaviours of copper-based superhydrophobic coating. Surf Eng. 2019. doi: 10.1080/02670844.2018.1433774
9.
Valipour MotlaghN, BirjandiFC, SargolzaeiJ, Superhydrophobic, superoleophobic and corrosion resistant coating on the stainless steel surface using a scalable method. Appl Surf Sci. 2013. doi: 10.1016/j.apsusc.2013.06.160
10.
IshizakiT, MasudaY, SakamotoM.Corrosion resistance and durability of superhydrophobic surface formed on magnesium alloy coated with nanostructured cerium oxide film and fluoroalkylsilane molecules in corrosive NaCl aqueous solution. Langmuir. 2011. doi: 10.1021/la2002783
11.
XuQF, WangJN.A superhydrophobic coating on aluminium foil with an anti-corrosive property. New J Chem. 2009. doi: 10.1039/b817130k
12.
XiaoX, XieW, YeZ.Preparation of corrosion-resisting superhydrophobic surface on aluminium substrate. Surf Eng. 2019. doi: 10.1080/02670844.2018.1433775
13.
VilaróI, YagüeJL, BorrósS.Superhydrophobic copper surfaces with anticorrosion properties fabricated by solventless CVD methods. ACS Appl Mater Interfaces. 2017. doi: 10.1021/acsami.6b12119
14.
ChenZ, HaoL, ChenA, A rapid one-step process for fabrication of superhydrophobic surface by electrodeposition method. Electrochim Acta. 2012. doi: 10.1016/j.electacta.2011.10.045
15.
SaadiNS, HassanLB, KarabacakT.Metal oxide nanostructures by a simple hot water treatment. Sci Rep. 2017. doi: 10.1038/s41598-017-07783-8
16.
ChoiHJ, ChooS, ShinJH, Fabrication of superhydrophobic and oleophobic surfaces with overhang structure by reverse nanoimprint lithography. J Phys Chem C. 2013. doi: 10.1021/jp4070399
17.
BreedveldV, HessDW, BaluB, Design of superhydrophobic paper/cellulose surfaces via plasma enhanced etching and deposition. Contact Angle, Wettability and Adhesion. 2010;6; doi: 10.1163/ej.9789004169326.i-400.104
18.
RessineA, FinnskogD, Marko-VargaG, Superhydrophobic and hydrophilic states on porous silicon for bioapplications. Micro Total analysis Systems - Proceedings of MicroTAS 2005 Conference: 9th International Conference on Miniaturized Systems for chemistry and Life Sciences; 2005.
RaynaudGM, RappRA.In situ observation of whiskers, pyramids and pits during the high-temperature oxidation of metals. Oxid. Met. 1984. doi: 10.1007/BF00659470
21.
BarsoumM. W.2002. Fundamentals of Ceramics. Series in Materials Science and Engineering. London: IOP publishing Ltd.
22.
YuanL, WangC, CaiR, Spontaneous ZnO nanowire formation during oxidation of Cu-Zn alloy. J Appl Phys. 2013. doi: 10.1063/1.4812569
23.
BhavsarK, PrabhuR, PollardP.Investigations on surface wettability of ZnO Nanowires using UV LEDs for biosensing applications). IOP Conference Series: Materials Science and Engineering; 2014. doi: 10.1088/1757-899X/64/1/012033
24.
ChuD, SinghSC, YongJ, Superamphiphobic surfaces with controllable Adhesion fabricated by femtosecond laser bessel beam on PTFE. Adv. Mater. Interfaces. 2019. doi: 10.1002/admi.201900550
WangP, ZhangD, QiuR, Green approach to fabrication of a Super-hydrophobic film on copper and the consequent corrosion resistance. Corros Sci. 2014. doi: 10.1016/j.corsci.2013.11.055
27.
KlotzD.Negative capacitance or inductive loop? – A general assessment of a common low frequency impedance feature. Electrochem. Commun. 2019. doi: 10.1016/j.elecom.2018.11.017
