This study focuses on the impact-sliding wear behaviour of CrN and WC/C tool protection coatings against Si3N4 ceramic material using a self-developed impact-sliding device. The wear mechanisms and tribochemical behaviour of the CrN coating and WC/C coating were compared and analysed using an optical microscope, 3D optical microscope, scanning electron microscope, energy-dispersive X-ray spectroscopy, electron probe microanalyzer, and X-ray photoelectron spectroscopy. The results showed that the WC/C coating exhibited very slight and uniform wear damage under impact-sliding conditions and the wear performance was much better than that of the CrN coating. Especially in the impact zone, the CrN coating showed peeling damage that greatly reduced the wear resistance to impact-sliding. The impact-sliding damage mechanisms of the CrN coating consisted of micro-peeling and plastic deformation, whereas those of the WC/C coating included deformation coordination and slight plastic deformation. The wear mechanisms of the CrN and WC/C coatings for the impact-sliding condition were fatigue wear, abrasive wear, and oxidation wear.
LinLK, MaoQS, XiaYM, Experimental study of specific matching characteristics of tunnel boring machine cutter ring properties and rock. Wear. 2017: 378–379:1–10. doi: 10.1016/j.wear.2017.01.072
2.
LinLK, XiaYM, MaoQS, Experimental study on wear behaviors of TBM disc cutter ring in hard rock conditions. Tribol Trans. 2018;61(5):920–929. doi: 10.1080/10402004.2018.1442895
3.
ZhangXH, LinLK, XiaYM, Experimental study on wear of TBM disc cutter rings with different kinds of hardness. Tunn Undergr Sp Tech. 2018;82:346–357. doi: 10.1016/j.tust.2018.08.050
4.
SuiXD, LiuJY, ZhangST, Microstructure, mechanical and tribological characterization of CrN/DLC/Cr-DLC multilayer coating with improved adhesive wear resistance. Appl Surf Sci. 2018;439:24–32. doi: 10.1016/j.apsusc.2017.12.266
5.
LeppaniemiJ, SippolaP, PeltonenA, Effect of surface wear on corrosion protection of steel by CrN coatings sealed with atomic layer deposition. ACS Omega. 2018;3(2):1791–1800. doi: 10.1021/acsomega.7b01382
6.
HeinrichsJ, MikadoH, KawakamiA, Wear mechanisms of WC-Co cemented carbide tools and PVD coated tools used for shearing Cu-alloy wire in zipper production. Wear. 2019;420:96–107. doi: 10.1016/j.wear.2018.12.075
7.
AissaniL, NouveauC, WalockMJ, Influence of vanadium on structure, mechanical and tribological properties of CrN coatings. Surf Eng. 2015;31(10):779–788. doi: 10.1179/1743294415Y.0000000043
8.
BaragettiS, GerosaR, VillaF.Step loading corrosion fatigue testing of 7075-T6 WC/C coated specimens in air and methanol. Eng Fract Mech. 2016;164:106–116. doi: 10.1016/j.engfracmech.2016.02.027
9.
DongYC, ZhengKL, FernandezJ, Experimental investigations on hot forming of AA6082 using advanced plasma nitrocarburised and CAPVD WC: C coated tools. J Mater Process Tech. 2017;240:190–199. doi: 10.1016/j.jmatprotec.2016.09.023
10.
MaD, HarveyTJ, WellmanRG, Cavitation erosion performance of CrAlYN/CrN nanoscale multilayer coatings deposited on Ti6Al4V by HIPIMS. J Alloy Compd. 2019;788:719–728. doi: 10.1016/j.jallcom.2019.02.238
11.
AouadiK, TliliB, NouveauC, Influence of substrate bias voltage on corrosion and wear behavior of physical vapor deposition CrN coatings. J Mater Eng Perform. 2019;28(5):2881–2891. doi: 10.1007/s11665-019-04033-y
12.
OliaH, Ebrahimi-KahrizsangiR, AshrafizadehF, Comparative study of corrosion and corrosion-wear behavior of TiN and CrN coatings on UNS S17400 stainless steel. Corros Rev. 2018;36(4):403–412. doi: 10.1515/corrrev-2017-0130
13.
PengJH, ZhuaZZ, SuDY.Sliding wear of nitrided and duplex coated H13 steel against aluminium alloy. Tribol Int. 2019;129:232–238. doi: 10.1016/j.triboint.2018.08.017
14.
CondeFF, DiazJAA, da SilvaGF, Dependence of wear and mechanical behavior of nitrocarburized/CrN/DLC layer on film thickness. Mater Res Ibero Am J. 2019;22(2):10.
15.
MoJL, ZhuMH.Sliding tribological behaviors of PVD CrN and AlCrN coatings against Si3N4 ceramic and pure titanium. Wear. 2009;267(5–8):874–881. doi: 10.1016/j.wear.2008.12.047
16.
MoJL, ZhuMH.Tribological investigation of WC/C coating under dry sliding conditions. Wear. 2011;271(9–10):1998–2005. doi: 10.1016/j.wear.2010.12.016
17.
SzparagaL, MydlowskaK, GilewiczA, Mechanical and anti-wear properties of multi-module Cr/CrN coatings. Int J Surf Sci Eng. 2019;13(1):37–49. doi: 10.1504/IJSURFSE.2019.097922
18.
WangYG, ChenY, ZhaoD, Deformation mechanism of CrN/nitriding coated steel in wear and nano-scratch experiments under heavy loading conditions. Appl Surf Sci. 2018;447:100–106. doi: 10.1016/j.apsusc.2018.03.213
19.
SinghSK, ChattopadhyayaS, PramanikA, Wear behavior of chromium nitride coating in dry condition at lower sliding velocity and load. Int J Adv Manuf Tech. 2018;96(5–8):1665–1675. doi: 10.1007/s00170-017-0796-x
20.
PougoumF, QianJC, LabergeM, Investigation of Fe3Al-based PVD/HVOF duplex coatings to protect stainless steel from sliding wear against alumina. Surf Coat Technol. 2018;350:699–711. doi: 10.1016/j.surfcoat.2018.07.070
21.
FengXG, ZhangYS, HuHJ, Comparison of mechanical behavior of TiN, TiNC, CrN/TiNC, TiN/TiNC films on 9Cr18 steel by PVD. Appl Surf Sci. 2017;422:266–272. doi: 10.1016/j.apsusc.2017.05.042
22.
KumarCS, PatelSK.Investigations on the effect of thickness and structure of AlCr and AlTi based nitride coatings during hard machining process. J Manuf Process. 2018;31:336–347. doi: 10.1016/j.jmapro.2017.11.031
23.
TengY, GuoYY, ZhangM, Effect of Cr/CrNx transition layer on mechanical properties of CrN coatings deposited on plasma nitrided austenitic stainless steel. Surf Coat Technol. 2019;367:100–107. doi: 10.1016/j.surfcoat.2019.03.068
24.
WuYP, LiZY, YangWJ, Fretting wear behavior of Ti/TiN multilayer film on uranium surface under various displacement amplitudes. Trans Nonferrous Met Soc China. 2018;28(8):1593–1601. doi: 10.1016/S1003-6326(18)64801-0
25.
WangLN, ChenGD, SuH, Impact dynamic analysis of C/C composite finger seal. P I Mech Eng G J Aer. 2017;231(7):1225–1237.
26.
MoJL, ZhuMH, LeylandA, Impact wear and abrasion resistance of CrN, AlCrN and AlTiN PVD coatings. Surf Coat Technol. 2013;215:170–177. doi: 10.1016/j.surfcoat.2012.08.077
ColomboDA, MandriAD, EcheverriaMD, Mechanical and tribological behavior of Ti/TiN and TiAl/TiAlN coated austempered ductile iron. Thin Solid Films. 2018;647:19–25. doi: 10.1016/j.tsf.2017.12.014
29.
de AlmeidaEAD, MilanJCG, CostaHL, Sliding wear of borided sintered AISI M2 steel coated with AlTiN/CrN multilayer. Wear. 2018;410:11–24. doi: 10.1016/j.wear.2018.05.025
30.
Mercado-SolisRD, Mata-MaldonadoJG, Quinones-SalinasMA, Micro-scale abrasive wear testing of CrN duplex PVD coating on pre-nitrided tool steel. Mater Res Ibero Am J. 2017;20(4):1092–1102.
31.
LiuJL, LiaoRD, XieGX, Tribological properties of CrN coating deposited on 20CrMo against tin bronze. Sci China Technol Sci. 2018;61(11):1713–1722. doi: 10.1007/s11431-018-9239-7
32.
DongYC, ZhengKL, FuentesG, Low adhesion effect of novel duplex NC/WC:C coatings against ductile materials at elevated temperatures. Mater Lett. 2018;220:32–35. doi: 10.1016/j.matlet.2018.02.079
33.
BenedettiM, FontanariV, TorresaniE, Investigation of lubricated rolling sliding behaviour of WC/C, WC/C-CrN, DLC based coatings and plasma nitriding of steel for possible use in worm gearing. Wear. 2017: 378–379:106–113. doi: 10.1016/j.wear.2017.02.029
34.
FallM, BouvardG, GuillonneauG, Damage of different tungsten carbides under impact-sliding motion. Wear. 2017;376:372–383. doi: 10.1016/j.wear.2016.12.046
35.
ChenY, NieXY.Study on fatigue and wear behaviors of a TiN coating using an inclined impact-sliding test. Surf Coat Technol. 2011;206(7):1977–1982. doi: 10.1016/j.surfcoat.2011.09.032
36.
ChenY, NieXY, LeylandA, Substrate and bonding layer effects on performance of DLC and TiN biomedical coatings in Hank's solution under cyclic impact-sliding loads. Surf Coat Technol. 2013;237:219–229. doi: 10.1016/j.surfcoat.2013.09.029
37.
MoJL, ZhuMH.Tribological oxidation behaviour of PVD hard coatings. Tribol Int. 2009;42(11):1758–1764. doi: 10.1016/j.triboint.2009.04.026
38.
TanDQ, MoJL, HeWF, Suitability of laser shock peening to impact-sliding wear in different system stiffnesses. Surf Coat Technol. 2019;358:22–35. doi: 10.1016/j.surfcoat.2018.11.007
39.
LinJL, SproulWD, MooreJJ, High rate deposition of thick CrN and Cr2N coatings using modulated pulse power (MPP) magnetron sputtering. Surf Coat Technol. 2011;205(10):3226–3234. doi: 10.1016/j.surfcoat.2010.11.039
40.
WarcholinskiB, GilewiczA, KuprinAS, Structure and properties of CrN coatings formed using cathodic arc evaporation in stationary system. Trans Nonferrous Met Soc China. 2019;29(4):799–810. doi: 10.1016/S1003-6326(19)64990-3
41.
BiswasB, PurandareY, SugumaranA, Effect of chamber pressure on defect generation and their influence on corrosion and tribological properties of HIPIMS deposited CrN/NbN coatings. Surf Coat Technol. 2018;336:84–91. doi: 10.1016/j.surfcoat.2017.08.021
42.
WanSH, WangH, XiaYN, Investigating the corrosion-fatigue wear on CrN coated piston rings from laboratory wear tests and field trial studies. Wear. 2019: 432–433:202940. doi: 10.1016/j.wear.2019.202940
43.
ZhangX, TianXB, ZhaoZW, Evaluation of the adhesion and failure mechanism of the hard CrN coatings on different substrates. Surf Coat Technol. 2019;364:135–143. doi: 10.1016/j.surfcoat.2019.01.059
44.
MengCY, YangL, WuYW, Study of the oxidation behavior of CrN coating on Zr alloy in air. J Nucl Mater. 2019;515:354–369. doi: 10.1016/j.jnucmat.2019.01.006
45.
KrzanB.Load-carrying capacity of WC/C-coated gears lubricated with a low-viscosity oil. Lubr Sci. 2016;28(3):127–139. doi: 10.1002/ls.1305
46.
LiuY, LiuW, MaY, A comparative study on wear and corrosion behaviour of HVOF- and HVAF-sprayed WC-10Co-4Cr coatings. Surf Eng. 2017;33(1):63–71. doi: 10.1080/02670844.2016.1218194
47.
LiuXB, KangJJ, YueW, Performance evaluation of HVOF sprayed WC-10Co4Cr coatings under slurry erosion. Surf Eng. 2019;35(9):816–825. doi: 10.1080/02670844.2019.1568661
48.
XiaoYY, ShiWK, LuoJ, The tribological performance of TiN, WC/C and DLC coatings measured by the four-ball test. Ceram Int. 2014;40(5):6919–6925. doi: 10.1016/j.ceramint.2013.12.015
MurariuAC, CernescuAV, PerianuIA.The effect of saline environment on the fatigue behaviour of HVOF-sprayed WC-CrC-Ni coatings. Surf Eng. 2018;34(10):755–761. doi: 10.1080/02670844.2017.1388561
51.
FarokhianG, SalehnasabB, AjamHZ, Influence of WC-20Co-1Ni coating by HVOF on lifespan of the downhole drilling motors. Surf Eng. 2018;34(10):771–782. doi: 10.1080/02670844.2017.1278643
