The mechanical and tribological properties of the metal components can be improved by spraying ceramic coatings, but the ceramic coatings are not anti-friction. Thus we mixed nickel cladded graphite into 8YSZ (ZrO2 + 8wt-%Y2O3) powders, hoping to improve the tribological characteristics of the as-deposited 8YSZ coating. Meanwhile, the 8YSZ-Ni/Graphite coating is deposited at a substrate temperature of 500°C to tune its microstructure and mechanical properties. The results demonstrate that the graphite uniformly distributed in the composite coatings and was hardly oxidized during spraying. The friction coefficient of 8YSZ-Ni/Graphite-RT coating is lower than that of 8YSZ coating due to the formation of graphite lubricating layer. The increase of defects leads to a decreasing tendency in the hardness and wear resistance. As the substrate temperature rises to 500°C, the mechanical and anti-wear properties of 8YSZ-Ni/Graphite coating are significantly improved.
YueW, FuZQ, WangS, Tribological synergistic effects between plasma nitrided 52100 steel and molybdenum dithiocarbamates additive in boundary. Tribol Int. 2014;74:72–78. doi: 10.1016/j.triboint.2014.02.007
2.
BuciumeanuM, QueirozJRC, MartinelliAE, The effect of surface treatment on the friction and wear behavior of dental Y-TZP ceramic against human enamel. Tribol Int. 2017;116:192–198. doi: 10.1016/j.triboint.2017.07.016
QiaoX, WangYM, WengWX, Influence of pores on mechanical properties of plasma sprayed coatings: case study of YSZ thermal barrier coatings. Ceram Int. 2018;44:564–577.
5.
BahamirianM, HadaviSMM, FarviziM, Enhancement of hot corrosion resistance of thermal barrier coatings by using nanostructured Gd2Zr2O7 coating. Surf Coat Technol. 2019;360:1–12. doi: 10.1016/j.surfcoat.2018.12.113
6.
MurrayJW, RanceGA, XuF, Alumina-graphene nanocomposite coatings fabricated by suspension high velocity oxy-fuel thermal spraying for ultra-low-wear. J Eur Ceram Soc. 2018;38:1819–1828. doi: 10.1016/j.jeurceramsoc.2017.10.022
7.
PantelisDI, SarafoglouCI, PetsasNP, Tribological properties of atmospheric plasma sprayed Cr2O3 coatings: effect of NiAl bond coating. Surf Eng. 2007;23:201–208. doi: 10.1179/174329407X174399
ZhaoXQ, LiSJ, HouGL, Influence of doping graphite on microstructure and tribological properties of plasma sprayed 3Al2O3-2SiO2 coating. Tribol Int. 2016;101:168–177. doi: 10.1016/j.triboint.2016.04.028
11.
BagdeP, SapateSG, KhatirkarRK, Friction and abrasive wear behaviour of Al2O3-13TiO2 and Al2O3-13TiO2+Ni graphite coatings. Tribol Int. 2018;121:353–372. doi: 10.1016/j.triboint.2018.01.067
12.
HeYJ, WinnubstL, BurggraafAJ, Influence of porosity on friction and wear of tetragonal zirconia polycrystal. J Am Ceram Sci. 1997;80:77–380. doi: 10.1111/j.1151-2916.1997.tb02792.x
13.
HuangCJ, LiWY, XieYC, Effect of substrate type on deposition behavior and wear performance of Ni-coated graphite/Al composite coatings deposited by cold spraying. J Mater Sci Technol. 2017;33:338–346. doi: 10.1016/j.jmst.2016.11.016
14.
HouGL, AnYL, ZhaoXQ, Improving interfacial, mechanical and tribological properties of alumina coatings on Al alloy by plasma arc heat-treatment of substrate. Appl Surf Sci. 2017;411:53–66. doi: 10.1016/j.apsusc.2017.03.170
15.
XingYZ, LiCJ, ZhangQ, Influence of microstructure on the ionic conductivity of plasma-sprayed yttria-stabilized zirconia deposits. J Am Ceram Soc. 2008;91:3931–3936. doi: 10.1111/j.1551-2916.2008.02775.x
16.
DianaB, AliE, AnirudhaVS.Reduced wear and friction enabled by graphene layers on sliding steel surfaces in dry nitrogen. Carbon. 2013;59:167–175. doi: 10.1016/j.carbon.2013.03.006
17.
MatsumotoM, TakayamaH, YokoeD, Thermal cycle behavior of plasma sprayed La2O3, Y2O3 stabilized ZrO2 coatings. Scripta Mater. 2006;54:2035–2039. doi: 10.1016/j.scriptamat.2006.03.015
18.
ZhangS, XieH, ZengXT, Residual stress characterization of diamond-like carbon coatings by an X-ray diffraction method. Surf Coat Technol. 1999;122:219–224. doi: 10.1016/S0257-8972(99)00298-4
19.
MatejicekJ, SampathS, DubskyJ.X-ray residual stress measurement in metallic and ceramic plasma sprayed coatings. J Therm Spray Technol. 1998;7:489–496. doi: 10.1361/105996398770350701
20.
WangY, DarutG, PoirierT, Cavitation erosion of plasma sprayed YSZ coatings produced by feedstocks with different initial sizes. Tribol Int. 2017;111:226–233. doi: 10.1016/j.triboint.2017.03.019
21.
PershinV, LufithaM, ChandraS, Effect of substrate temperature on adhesion strength of plasma-sprayed nickel coatings. J Therm Spray Technol. 2003;12:370–376. doi: 10.1361/105996303770348249
22.
SongH, JiL, LiHX, External field induced growth effect of an a-C:H film for manipulating its medium-range nanostructures and properties. ACS Appl Mater Inter. 2016;8:6639–6645. doi: 10.1021/acsami.5b11970
23.
DubeyP, AryaV, SrivastavaSK, Study of thermal stability and mechanical properties of fcc phase Zr22W19N58 thin films deposited by reactive magnetron sputtering. Surf Coat Technol. 2014;245:34–39. doi: 10.1016/j.surfcoat.2014.02.032
24.
ChenLY, XuTX, LuaS, Improved hardness and wear resistance of plasma sprayed nanostructured NiCrBSi coating via short-time heat treatment. Surf Coat Technol. 2018;350:436–444. doi: 10.1016/j.surfcoat.2018.07.037
25.
DingQJ, ZhangAH, ZhaoG, Effects of La2O3 on the microstructure and tribological properties of plasma-sprayed Cr2O3-TiO2 coatings. Int J Mod Phys B. 2017;31:1–7.
26.
RadhikaR, KumarN, PandianR, Structural transformation and friction behavior in turbostratic graphite sliding against Si3N4, SiC and Al2O3 balls. Surf Coat Technol. 2014;253:300–306. doi: 10.1016/j.surfcoat.2014.06.001
27.
FerrariAC, RobertsonJR.Interpretation of Raman spectra of disordered and amorphous carbon. Phys Rev B. 2000;61:95–107. doi: 10.1103/PhysRevB.61.14095
28.
FerrariAC, RobertsonJR.Resonant Raman spectroscopy of disordered, amorphous, and diamondlike carbon. Phys Rev B. 2001;64:1–13. doi: 10.1103/PhysRevB.64.075414
29.
HinesJE, BradtRC, BiggersJV, Wear of materials. 1977. p. 462.
