Microarc oxidation (MAO) coatings were formed on AZ91D magnesium alloy in zirconate–phosphate electrolytes with and without the addition of titanium carbide (TiC) and niobium carbide (NbC) particles. Surface morphologies, structures, compositions and corrosion resistance of the MAO coatings were investigated. The MAO coating formed in the based electrolyte was mainly composed of MgO, Mg2Zr5O12 and some amorphous phases. TiC and NbC particles in the electrolyte were incorporated and uniformly distributed in the MAO coatings. Both particles increased the thickness and compactness of the MAO coatings. Electrochemical measurements results indicated that the TiC and NbC particles in the electrolyte improved the corrosion resistance of the MAO coating, and those formed in the electrolyte with NbC particles showed the best corrosion resistance.
SongG, AtrensA, DarguschM.Influence of microstructure on the corrosion of diecast AZ91D. Corros Sci. 1999;41:249–273. doi: 10.1016/S0010-938X(98)00121-8
2.
GrayJE, LuanB.Protective coatings on magnesium and its alloys – a critical review. J Alloys Comp. 2002;336:88–113. doi: 10.1016/S0925-8388(01)01899-0
LuX, MohedanoM, BlawertC, Plasma electrolytic oxidation coatings with particle additions – a review. Surf Coat Technol. 2016;307:1165–1182. doi: 10.1016/j.surfcoat.2016.08.055
5.
ZhangD, GeY, LiuG, Investigation of tribological properties of micro-arc oxidation ceramic coating on Mg alloy under dry sliding condition. Ceram Int. 2018;44:16164–16172. doi: 10.1016/j.ceramint.2018.05.137
6.
DouJ, ChenY, YuH, Research status of magnesium alloys by micro-arc oxidation: a review. Surf Eng. 2017;33:731–738. doi: 10.1080/02670844.2017.1278642
7.
SreekanthD, RameshbabuN, VenkateswarluK.Effect of various additives on morphology and corrosion behavior of ceramic coatings developed on AZ31 magnesium alloy by plasma electrolytic oxidation. Ceram Int. 2012;38:4607–4615. doi: 10.1016/j.ceramint.2012.02.040
8.
YangX, MaA, LiuH, Microstructure and corrosion resistance of yellow MAO coatings. Surf Eng. 2019;35:334–342. doi: 10.1080/02670844.2018.1445939
9.
Sankara NarayananTSN, ParkIS, LeeMH.Strategies to improve the corrosion resistance of microarc oxidation (MAO) coated magnesium alloys for degradable implants: Prospects and challenges. Prog Mater Sci. 2014;60:1–71. doi: 10.1016/j.pmatsci.2013.08.002
10.
GuC, WangL, HuX, Borate's effects on coatings by PEO on AZ91D alloy. Surf Eng. 2017;33:773–778. doi: 10.1080/02670844.2017.1287622
11.
WangY, WeiD, YuJ, Effects of Al2O3 nano-additive on performance of micro-arc oxidation coatings formed on AZ91D Mg alloy. J Mater SciTechnol. 2014;30:984–990.
12.
LiX, LuanB.Discovery of Al2O3 particles incorporation mechanism in plasma electrolytic oxidation of AM60B magnesium alloy. Mater Lett. 2012;86:88–91. doi: 10.1016/j.matlet.2012.07.032
13.
MohedanoM, ArrabalR, MingoB, Role of particle type and concentration on characteristics of PEO coatings on AM50 magnesium alloy. Surf Coat Technol. 2018;334:328–335. doi: 10.1016/j.surfcoat.2017.11.058
14.
LeeKM, ShinKR, NamgungS, Electrochemical response of ZrO2-incorporated oxide layer on AZ91 Mg alloy processed by plasma electrolytic oxidation. Surf Coat Technol. 2011;205:3779–3784. doi: 10.1016/j.surfcoat.2011.01.033
15.
RehmanZU, ShinSH, LimH, Transformation of plasma electrolytic oxidation coatings from crater to cluster-based structure with increase in DC voltage and the role of ZrO2 nanoparticles. Surf Coat Technol. 2017;311:383–390. doi: 10.1016/j.surfcoat.2016.12.112
16.
ArrabalR, MatykinaE, ViejoF, AC plasma electrolytic oxidation of magnesium with zirconia nanoparticles. Appl Surf Sci. 2008;254:6937–6942. doi: 10.1016/j.apsusc.2008.04.100
17.
LeeKM, LeeBU, YoonSI, Evaluation of plasma temperature during plasma oxidation processing of AZ91 Mg alloy through analysis of the melting behavior of incorporated particles. Electrochim Acta. 2012;67:6–11. doi: 10.1016/j.electacta.2012.01.053
18.
LuX, SchiedaM, BlawertC, Formation of photocatalytic plasma electrolytic oxidation coatings on magnesium alloy by incorporation of TiO2 particles. Surf Coat Technol. 2016;307:287–291. doi: 10.1016/j.surfcoat.2016.09.006
19.
LiW, TangM, ZhuL, Formation of microarc oxidation coatings on magnesium alloy with photocatalytic performance. Appl Surf Sci. 2012;258:10017–10021. doi: 10.1016/j.apsusc.2012.06.066
20.
LuX, BlawertC, HuangY, Plasma electrolytic oxidation coatings on Mg alloy with addition of SiO2 particles. Electrochim Acta. 2016;187:20–33. doi: 10.1016/j.electacta.2015.11.033
21.
LuX, BlawertC, MohedanoM, Influence of electrical parameters on particle uptake during plasma electrolytic oxidation processing of AM50 Mg alloy. Surf Coat Technol. 2016;289:179–185. doi: 10.1016/j.surfcoat.2016.02.006
22.
MohedanoM, BlawertC, ZheludkevichML.Silicate-based Plasma Electrolytic Oxidation (PEO) coatings with incorporated CeO2 particles on AM50 magnesium alloy. Mater Des. 2015;86:735–744. doi: 10.1016/j.matdes.2015.07.132
23.
LimTS, RyuHS, HongS.Electrochemical corrosion properties of CeO2-containing coatings on AZ31 magnesium alloys prepared by plasma electrolytic oxidation. Corros Sci. 2012;62:104–111. doi: 10.1016/j.corsci.2012.04.043
24.
Vatan HN, Ebrahimi-kahrizsangiR, Kasiri-asgaraniM.Structural, tribological and electrochemical behavior of SiC nanocomposite oxide coatings fabricated by plasma electrolytic oxidation (PEO) on AZ31 magnesium alloy. J Alloys Compd. 2016;683:241–255. doi: 10.1016/j.jallcom.2016.05.096
25.
LuX, BlawertC, KainerKU, Influence of particle additions on corrosion and wear resistance of plasma electrolytic oxidation coatings on Mg alloy. Surf Coat Technol. 2018;352:1–14. doi: 10.1016/j.surfcoat.2018.08.003
26.
LouB, LeeJ, TsengC, Mechanical property and corrosion resistance evaluation of AZ31 magnesium alloys by plasma electrolytic oxidation treatment: effect of MoS2 particle addition. Surf Coat Technol. 2018;350:813–822. doi: 10.1016/j.surfcoat.2018.04.044
27.
TjongSC, MaZY.Microstructural and mechanical characteristics of in situ metal matrix composites. Mat Sci Eng R. 2000;29:49–113. doi: 10.1016/S0927-796X(00)00024-3
28.
ZhouF, ZhangH, SunC, Microstructure and wear properties of multi ceramics reinforced metal-matrix composite coatings on Ti–6Al–4 V alloy fabricated by laser surface alloying. Surf Eng. 2019;35:683–691. doi: 10.1080/02670844.2019.1570611
ZoitaCN, BraicL, KissA, Characterization of NbC coatings deposited by magnetron sputtering method. Surf Coat Technol. 2010;204:2002–2005. doi: 10.1016/j.surfcoat.2009.08.050
31.
WuSF, YanagisawaK, NishizawaT.ζ-potential on carbons and carbides. Carbon N Y. 2001;39:1537–1541. doi: 10.1016/S0008-6223(00)00275-X
32.
YerokhinA, SnizhkoL, GurevinaN, Spatial characteristics of discharge phenomena in plasma electrolytic oxidation of aluminium alloy. Surf Coat Technol. 2004;177–178:779–783. doi: 10.1016/j.surfcoat.2003.06.020
33.
CuiX, LiuC, YangR, Self-sealing micro-arc oxidation coating on AZ91D Mg alloy and its formation mechanism. Surf Coat Technol. 2015;269:228–237. doi: 10.1016/j.surfcoat.2014.09.071
34.
TangM, LiW, LiuH, Preparation Al2O3/ZrO2 composite coating in an alkaline phosphate electrolyte containing K2ZrF6 on aluminum alloy by microarc oxidation. Appl Surf Sci. 2012;258:5869–5875. doi: 10.1016/j.apsusc.2012.02.124
35.
SongY, DongK, ShanD, Study of the formation process of titanium oxides containing microarc oxidation film on Mg alloys. Appl Surf Sci. 2014;314:888–895. doi: 10.1016/j.apsusc.2014.06.180
36.
KazanskiB, KossenkoA, ZinigradM, Fluoride ions as modifiers of the oxide layer produced by plasma electrolytic oxidation on AZ91D magnesium alloy. Appl Surf Sci. 2013;287:461–466. doi: 10.1016/j.apsusc.2013.09.180
37.
LalehM, Sabour RouhaghdamA, ShahrabiT, Effect of alumina sol addition to micro-arc oxidation electrolyte on the properties of MAO coatings formed on magnesium alloy AZ91D. J Alloys Comp. 2010;496:548–552. doi: 10.1016/j.jallcom.2010.02.098
38.
DuanH, YanC, WangF.Effect of electrolyte additives on performance of plasma electrolytic oxidation films formed on magnesium alloy AZ91D. Electrochim Acta. 2007;52:3785–3793. doi: 10.1016/j.electacta.2006.10.066
39.
SrinivasanPB, LiangJ, BlawertC, Effect of current density on the microstructure and corrosion behavior of plasma electrolytic oxidation treated AM50 magnesium alloy. Appl Surf Sci. 2009;255:4212–4218. doi: 10.1016/j.apsusc.2008.11.008
40.
XiaSJ, YueR, RateickRG, Electrochemical studies of AC/DC Anodized Mg alloy in NaCl solution. J Electrochem Soc. 2004;151:B179–B187. doi: 10.1149/1.1646139
41.
DuanH, DuK, YanC, Electrochemical corrosion behavior of composite coatings of sealed MAO film on magnesium alloy AZ91D. Electrochim Acta. 2006;51:2898–2908. doi: 10.1016/j.electacta.2005.08.026
