Silicide coatings were deposited on the Nb–5W–2.5Mo–1Zr alloy by pack cementation method. The microstructure, phase distribution, growth kinetics and oxidation behaviour of the coatings were studied. The results show that the coatings were mainly composed of an outer NbSi2 layer, an acicular Nb5Si3-dispersed NbSi2 two-phase layer and a Nb5Si3 inner layer, exhibiting a three-layer structure. The temperature and holding time both have a significant effect on the coating formation. It was found that the coating growth kinetics at 1250°C followed a parabolic law. The coating exhibited a relatively good short-term protection to the substrate in static air at 850 and 1250°C. Both scales formed at the two oxidation temperatures consisted mainly of a mixture of SiO2, Nb2O5 and NbO.
QiaoYQ, GuoXP, LiX.Hot corrosion behavior of silicide coating on an Nb-Ti-Si based ultrahigh temperature alloy. Corros Sci. 2015;91:75–85. doi: 10.1016/j.corsci.2014.10.053
3.
MoriccaMP, VarmaSK.High temperature oxidation characteristics of Nb-10W-XCr alloys. J Alloys Compd. 2010;489:195–201. doi: 10.1016/j.jallcom.2009.09.051
4.
WeiWQ, WangHW, ZouCM, Microstructure and oxidation behavior of Nb-based multi-phase alloys. Mater Des. 2013;46:1–7. doi: 10.1016/j.matdes.2012.09.046
5.
SankarM, SatyaPrasadVV, BaligidadRG, Microstructure, oxidation resistance and tensile properties of silicide coated Nb-alloy C-103. Mater Sci Eng A. 2015;645:339–346. doi: 10.1016/j.msea.2015.07.063
6.
SuLF, Lu-SteffesO, ZhangH, An ultra-high temperature Mo-Si-B based coating for oxidationprotection of NbSS/Nb5Si3 composites. Appl Surf Sci. 2015;337:38–44. doi: 10.1016/j.apsusc.2015.02.061
7.
YinL, YiD, YangL.Composition and microstructure of modified silicide coating on niobium. Surf Eng. 2006;22(4):239–242. doi: 10.1179/174329406X122856
8.
MajumdarS, KishorJ, PaulB, Isothermal oxidation behavior and growth kinetics of silicide coatings formed on Nb-1Zr-0.1C alloy. Corros Sci. 2015;95:100–109. doi: 10.1016/j.corsci.2015.02.035
9.
QiaoYQ, GuoXP.Formation of Cr-modified silicide coatings on a Ti-Nb-Si based ultrahigh-temperature alloy by pack cementation process. Appl Surf Sci. 2010;256:7462–7471. doi: 10.1016/j.apsusc.2010.05.091
10.
WuJY, WangW, ZhouCG.Microstructure and oxidation resistance of Mo-Si-B coating on Nb based in situ composites. Corros Sci. 2014;87:421–426. doi: 10.1016/j.corsci.2014.07.006
11.
MajumdarS, AryaA, SharmaIG, Deposition of aluminide and silicide based protective coatings on niobium. Appl Surf Sci. 2010;257:635–640. doi: 10.1016/j.apsusc.2010.07.055
12.
AlamMZ, RaoAS, DasDK.Microstructure and high temperature oxidation performance of silicide coating on Nb-based alloy C-103. Oxid Met. 2010;73:513–530. doi: 10.1007/s11085-010-9190-x
13.
ChengJC, YiS, ParkJS.Oxidation behavior of Nb-Si-B alloys with the NbSi2 coating layer formed by a pack cementation technique. Int J Refract Met Hard Mater. 2013;41:103–109. doi: 10.1016/j.ijrmhm.2013.02.010
14.
GuoXP, ZhaoLX, GuanP, Oxidation behavior and pack siliconized oxidation-resistant coatings of an Nb-based ultrahigh temperature alloy. Mater Sci Forum. 2007;561-565:371–374. doi: 10.4028/www.scientific.net/MSF.561-565.371
15.
ZhengHZ, XiongLL, LuoQH, Development of multilayer oxidation resistant coatings on Cr-50Nb alloy. Appl Surf Sci. 2015;359:515–520. doi: 10.1016/j.apsusc.2015.10.076
16.
TianXD, GuoXP.Structure of Al-modified silicide coatings on an Nb-based ultrahigh temperature alloy prepared by pack cementation techniques. Surf Coat Technol. 2009;203:1161–1166. doi: 10.1016/j.surfcoat.2008.10.018
17.
QiaoYQ, ShenZ, GuoXP.Co-deposition of Si and B to form oxidation-resistant coatings on an Nb-Ti-Si based ultrahigh temperature alloy by pack cementation technique. Corros Sci. 2015;93:126–137. doi: 10.1016/j.corsci.2015.01.013
18.
ShaoW, WangW, ZhouCG.Deposition of a B-modified silicide coating for Nb-Si based alloyoxidation protection. Corros Sci. 2016;111:786–792. doi: 10.1016/j.corsci.2016.06.020
19.
WangW, YuanBF, ZhouCG.Formation and oxidation resistance of germanium modified silicide coating on Nb based in situ composites. Corros Sci. 2014;80:164–168. doi: 10.1016/j.corsci.2013.11.029
20.
KnittelS, MathieuS, VilasiM.Nb4Fe4Si7 coatings to protect niobium and niobium silicide composites against high temperature oxidation. Surf Coat Technol. 2013;235:144–154. doi: 10.1016/j.surfcoat.2013.07.027
21.
ZhangP, GuoXP.Y and Al modified silicide coatings on an Nb-Ti-Si based ultrahigh temperature alloy prepared by pack cementation process. Surf Coat Technol. 2011;206:446–454. doi: 10.1016/j.surfcoat.2011.07.056
22.
LiuYT, GuoXP.Microstructure and growth kinetics of Ce and Y jointly modified silicide coatings for Nb-Ti-Si based ultrahigh temperature alloy. Prog Nat Sci. 2013;23:190–197. doi: 10.1016/j.pnsc.2013.02.003
23.
LiuYX, WangW, LiuZJ, Effect of Y2O3 content in the pack mixtures on microstructure and oxidation resistance of B-Y modified silicide coating. Prog Nat Sci. 2016;26:49–57. doi: 10.1016/j.pnsc.2016.01.003
24.
WangW, ZhangBY, ZhouCG.Formation and oxidation resistance of Hf and Al modified silicide coating on Nb-Si based alloy. Corros Sci. 2014;86:304–309. doi: 10.1016/j.corsci.2014.06.011
25.
ZhengX, BaiR, WangDH, Research development of refractory metal materials used in the field of aerospace. Rare Metal Mater Eng. 2011;40:1871–1875.
26.
BukhanovskiiVV, BorisenkoVA, KharchenkoVK.Short-term strength and ductility characteristics for niobium alloy 10VMTs of the system Nb-W-Mo-Zr in the temperature range 290–2270 K. Strength Mater. 1996;28:491–496. doi: 10.1007/BF02209321
27.
BukhanovskiiVV.Effect of silicide ceramic coatings on the high-temperature strength and ductility of niobium alloy of the Nb-W-Mo-Zr system. Met Sci Heat Treat. 2004;46:78–84. doi: 10.1023/B:MSAT.0000029607.97403.94
28.
BukhanovskiiVV, MamuziaeI.The effect of temperature on mechanical characteristics of niobium alloys of the system Nb-W-Mo-Zr. Metalurgija. 2003;42:85–90.
MilaneseC, BuscagliaV, MagliaF, Reactive growth of niobium silicides in bulk diffusion couples. Acta Mater. 2003;51:4837–4846. doi: 10.1016/S1359-6454(03)00323-9
31.
MajumdarS, SharmaI, SamajdarI, Relationship between pack chemistry and growth of silicide coatings on Mo-TZM alloy. J Electrochem Soc. 2008;155:D734–D741. doi: 10.1149/1.2987954
32.
ChoiYJ, YoonJK, KimGH, High temperature isothermal oxidation behavior of NbSi2 coating at 1000–1450°C. Corros Sci. 2017;129:102–114. doi: 10.1016/j.corsci.2017.10.002
33.
SuzukiRO, IshikawaM, OnoK.Nbsi2 coating on niobium using molten salt. J Alloys Compd. 2002;336:280–285. doi: 10.1016/S0925-8388(01)01879-5
