A double in situ process, combination of injection chemical vapour deposition and biomineralisation, was used to fabricate carbon nanotubes (CNTs)-reinforced apatite composite coatings on carbon/carbon composite. The SEM images and XPS spectra showed that CNTs were wrapped in apatite and the apatite layer became dense with prolonging the immersion time. The results of the corrosion resistance of the apatite composite coatings, which was evaluated by electrochemical techniques, showed a trend that the longer biomineralisation time contributed to the more stable coating in simulated body fluid. The dense apatite layer is not beneficial for the conduction of electrons, which leads to the low value of polarisation current and high value of polarisation impedance.
XiongXB, ChuCC, HuangJF, Preparation and characterization of fluoridated hydroxyapatite coatings on HT-C/C composites. Surf Coat Technol. 2012;206:2535–2540. doi: 10.1016/j.surfcoat.2011.11.006
5.
WangHJ, ZhaoCL, ChenY, Electrochemical property and in vitro degradation of DCPD-PCL composite coating on the biodegradable Mg-Zn alloy. Mater Lett. 2012;68:435–438. doi: 10.1016/j.matlet.2011.11.029
6.
AbdenMJ, AfrozeJD, AlamMS, Pressureless sintering and mechanical properties of hydroxyapatite/functionalized multi-walled carbon nanotube composite. Mater Sci Eng. 2016;67:418–424. doi: 10.1016/j.msec.2016.05.018
7.
AnQ, RiderAN, ThostensionET.Electrophoretic deposition of carbon nanotubes onto carbon-fiber fabric for production of carbon/epoxy composites with improved mechanical properties. Carbon. 2012;50:4130–4143. doi: 10.1016/j.carbon.2012.04.061
8.
LahiriI, LahiriD, JinSH, Carbon nanotubes: how strong is their bond with the substrate?Nano. 2011;5:780–787.
9.
WhiteAA, BestSM, KinlochIA.Hydroxyapatite–carbon nanotube composites for biomedical applications: a review. Int J Appl Ceram Technol.2007;4:1–13. doi: 10.1111/j.1744-7402.2007.02113.x
10.
PriceRL, WaidMC, HaberstrohKM, Selective bone cell adhesion on formulations containing carbon nanofibers. Biomaterials. 2003;24:1877–1887. doi: 10.1016/S0142-9612(02)00609-9
11.
FlahautE, DurrieuMC, Remy-ZolghadriM, Investigation of the cytotoxicity of CCVD carbon nanotubes towards human umbilical vein endothelial cells. Carbon. 2006;44:1093–1099. doi: 10.1016/j.carbon.2005.11.007
12.
SaitoN, HaniuH, UsuiY, Safe clinical use of carbon nanotubes as innovative biomaterials. Chem Rev.2014;114:6040–6079. doi: 10.1021/cr400341h
13.
BalaniK, ChenY, HarimkarSP, Tribological behavior of plasma-sprayed carbon nanotube-reinforced hydroxyapatite coating in physiological solution. Acta Biomater. 2007;3:944–951. doi: 10.1016/j.actbio.2007.06.001
14.
BaiY, NeupaneMP, ParkIS, Electrophoretic deposition of carbon nanotubes-hydroxyapatite nanocomposites on titanium substrate. Mater Sci Eng.2010;30:1043–1049. doi: 10.1016/j.msec.2010.05.007
15.
LiuSJ, LiHJ, ZhangLL, Pulsed electrodeposition of carbon nanotubes-hydroxyapatite nanocomposites for carbon/carbon composites. Ceram Int. 2016;42:15650–15657. doi: 10.1016/j.ceramint.2016.07.020
16.
KheradmandfardM, FathiMH, AhangarianM, In vitro bioactivity evaluation of magnesium-substituted fluorapatite nanopowders. Ceram Int. 2012;38:169–175. doi: 10.1016/j.ceramint.2011.05.157
17.
KimHY, HimenoT, KawashitaM, The mechanism of biomineralization of bone-like apatite on synthetic hydroxyapatite: an in vitro assessment. J R Soc Interface.2004;1:17–22. doi: 10.1098/rsif.2004.0003
18.
AryalS, BhattaraiSR, Remant BahadurKC, Carbon nanotubes assisted biomimetic synthesis of hydroxyapatite from simulated body fluid. Mater Sci Eng A. 2006;426:202–207. doi: 10.1016/j.msea.2006.04.004
19.
FengL, LiKZ, ZhaoZG, Three-dimensional carbon/carbon composites with vertically aligned carbon nanotubes: providing direct and indirect reinforcements to pyrocarbon matrix. Mater Des. 2016;92:120–128. doi: 10.1016/j.matdes.2015.12.036
20.
HazarikaA, MajiTK.Strain sensing behavior and dynamic mechanical properties of carbon nanotubes/nanoclay reinforced wood polymer nanocomposite. Chem Eng J. 2014;247:33–41. doi: 10.1016/j.cej.2014.02.069
21.
BaishyaP, MajiTK.Functionlization of MWCNT and their application in properties development of green wood nanocomposite. Carbohydr Polym. 2016;149:332–339. doi: 10.1016/j.carbpol.2016.04.117
22.
PaitalSR, DahotreNB.Laser surface treatment for porous and textured Ca-P bio-ceramic coating on Ti-6Al-4V. Biomed Mater. 2007;2:274–281. doi: 10.1088/1748-6041/2/4/011
23.
LiP, YangQ, ZhangF.The effect of residual glassy phase in a bioactive glass-ceramic on the formation of its surface apatite layer in vitro. J Mater Sci.1992;3:452–456.
24.
BornapourM, MujaN, Shun-TimD, Biocompatibility and biodegradability of Mg-Sr alloys: the formation of Sr-substituted hydroxyapatite. Acta Biomater. 2013;9:5319–5330. doi: 10.1016/j.actbio.2012.07.045
25.
GopiD, ShinyjoyE, SekarM, Development of carbon nanotubes reinforced hydroxyapatite composite coating on titanium by electrodeposition method. Corros Sci.2013;73:321–330. doi: 10.1016/j.corsci.2013.04.021
