This study has been initiated to form a TiO2 layer having enhanced biological properties on the surface of a CoCr alloy, which is mostly used in manufacturing of orthopaedic implants. As a novel approach, CoCr alloy samples were first coated with titanium and then oxidised in air at 600°C for 60 h. Surface characterisation of the samples were made by structural surveys (scanning electron microscopic examinations, X-ray diffraction analyses), roughness and hardness measurements, bioactivity and wear tests. Results of the experiments have showed that fabrication of TiO2 as the outermost surface layer caused remarkable increment in the wear resistance and the bioactivity of the CoCr alloy.
DavisJR, editor.Handbook of materials for medical devices. Materials Park, OH
: ASM International; 2003.
3.
CarrBC, GoswamiT.Knee implants – review of models and biomechanics. Mater. Des. 2009;30:398–413. doi: 10.1016/j.matdes.2008.03.032
4.
WangQ, ZhangL, DongJ.Effects of plasma nitriding on microstructure and tribological properties of CoCrMo alloy implant materials. J Bionic Eng. 2010;7:337–344. doi: 10.1016/S1672-6529(10)60265-X
5.
ÖztürkO, TürkanǓ, EroǧluAE.Metal ion release from nitrogen ion implanted CoCrMo orthopedic implant material. Surf Coatings Technol. 2006;200:5687–5697. doi: 10.1016/j.surfcoat.2005.08.113
6.
LiuC, MatsunamiC, ShirosakiY, Bioactive Co-Cr alloy for biomedical applications prepared by surface modification using self-assembled monolayers and poly-γ-glutamic acid. Dent Mater J. 2015;34:707–712. doi: 10.4012/dmj.2015-064
FujinoS, TokunagaH, SaizE, Fabrication and characterization of bioactive glass coatings on Co-Cr implant alloys. Mater Trans. 2004;45:1147–1151. doi: 10.2320/matertrans.45.1147
9.
TürkanU, ÖztürkO, EroǧluAE.Metal ion release from TiN coated CoCrMo orthopedic implant material. Surf Coatings Technol. 2006;200:5020–5027. doi: 10.1016/j.surfcoat.2005.05.005
10.
PhamVH, LeeSH, LiY, Utility of tantalum (Ta) coating to improve surface hardness in vitro bioactivity and biocompatibility of Co-Cr. Thin Solid Films. 2013;536:269–274. doi: 10.1016/j.tsf.2013.03.042
ShirdarMR, TaheriMM, MoradifardH, Hydroxyapatite-Titania nanotube composite as a coating layer on Co-Cr-based implants: mechanical and electrochemical optimization. Ceram Int. 2016;42:6942–6954. doi: 10.1016/j.ceramint.2016.01.080
13.
PleckoM, SievertC, AndermattD, Osseointegration and biocompatibility of different metal implants--a comparative experimental investigation in sheep. BMC Musculoskelet Disord. 2012;13:32. doi: 10.1186/1471-2474-13-32
14.
TaheriM, Mohamadi ZahraniE.Effect of novel thermal oxidation process on wear resistance of commercial pure titanium. Surf Eng. 2008;24:475–478. doi: 10.1179/026708408X341205
15.
SathishS, GeethaM, PandeyND, Studies on the corrosion and wear behavior of the laser nitrided biomedical titanium and its alloys. Mater Sci Eng C. 2010;30:376–382. doi: 10.1016/j.msec.2009.12.004
16.
TekerD, MuhaffelF, MenekseM, Characteristics of multi-layer coating formed on commercially pure titanium for biomedical applications. Mater Sci Eng C. 2015;48:579–585. doi: 10.1016/j.msec.2014.12.058
17.
ZhaoX, ZhangP, WangX, In-situ formation of textured TiN coatings on biomedical titanium alloy by laser irradiation. J Mech Behav Biomed Mater. 2018;78:143–153. doi: 10.1016/j.jmbbm.2017.11.019
18.
FeiC, HaiZ, ChenC, Study on the tribological performance of ceramic coatings on titanium alloy surfaces obtained through microarc oxidation. Prog Org Coatings. 2009;64:264–267. doi: 10.1016/j.porgcoat.2008.08.034
19.
VadirajA, KamarajM, GnanamoorthyR.Fretting wear studies on uncoated, plasma nitrided and laser nitrided biomedical titanium alloys. Mater Sci Eng A. 2007;445–446:446–453. doi: 10.1016/j.msea.2006.09.086
20.
BloyceA, QiPY, DongH, Surface modification of titanium alloys for combined improvements in corrosion and wear resistance. Surf. Coatings Technol. 1998;107:125–132. doi: 10.1016/S0257-8972(98)00580-5
21.
GüleryüzH, ÇimenoǧluH.Effect of thermal oxidation on corrosion and corrosion-wear behaviour of a Ti-6Al-4V alloy. Biomaterials. 2004;25:3325–3333. doi: 10.1016/j.biomaterials.2003.10.009
22.
Siva Rama KrishnaD, BramaYL, SunY.Thick rutile layer on titanium for tribological applications. Tribol Int. 2007;40:329–334. doi: 10.1016/j.triboint.2005.08.004
23.
FengB, LuX, ChenJM, Fretting wear behaviour of titanium modified by heat treatment. Surf Eng. 2011;27:246–252. doi: 10.1179/174329409X397769
24.
WangG, LiJ, LvK, Surface thermal oxidation on titanium implants to enhance osteogenic activity and in vivo osseointegration. Sci Rep. 2016;6:1–13. doi: 10.1038/s41598-016-0001-8
25.
GuleryuzH, MuhaffelF, CimenogluH.Oxidized titanium. In: SonntagR, KretzerJ, editors. Materials for total joint arthroplasty biotribology of potential bearings. London
: College Press; 2005. p. 355–394.
26.
CimenogluH, MeydanogluO, BaydoganM, Characterization of thermally oxidized Ti6Al7Nb alloy for biological applications. Met Mater Int. 2011;17:765–770. doi: 10.1007/s12540-011-1011-5
27.
JalotaS, BhaduriSB, TasAC.Effect of carbonate content and buffer type on calcium phosphate formation in SBF solutions. J Mater Sci Mater Med. 2006;17:697–707. doi: 10.1007/s10856-006-9680-1
28.
GuleryuzH, CimenogluH.Surface modification of a Ti-6Al-4V alloy by thermal oxidation. Surf Coatings Technol. 2005;192:164–170. doi: 10.1016/j.surfcoat.2004.05.018
29.
NonakaK, FujiiH, Effect of oxygen in titanium on reaction diffusion between Ti & Al. Mater Trans. 2001;42:1731–1740. doi: 10.2320/matertrans.42.1731
30.
KongL, QiJ, LuB, Oxidation resistance of TiAl3-Al composite coating on orthorhombic Ti2AlNb based alloy. Surf Coatings Technol. 2010;204:2262–2267. doi: 10.1016/j.surfcoat.2009.12.023
31.
MiyajimaH, OzerF, ImazatoS, Surface characteristics of bioactive Ti fabricated by chemical treatment for cartilaginous-integration. Mater Sci Eng C. 2017;78:495–502. doi: 10.1016/j.msec.2017.03.250
32.
GuéhennecLL, SoueidanA, LayrolleP, Surface treatments of titanium dental implants for rapid osseointegration. Dent Mater. 2007;23:844–854. doi: 10.1016/j.dental.2006.06.025
33.
KhodaeiM, MeratianM, ShaltookiM, Surface modification of Ti6Al4V implants by heat, H2O2 and alkali treatments. Surf Eng. 2016;32:786–793. doi: 10.1080/02670844.2016.1159818
34.
CimenogluH, GunyuzM, KoseGT, Micro-arc oxidation of Ti6Al4V and Ti6Al7Nb alloys for biomedical applications. Mater Charact. 2011;62:304–311. doi: 10.1016/j.matchar.2011.01.002
35.
KokuboT, TakadamaH.How useful is SBF in predicting in vivo bone bioactivity?Biomaterials. 2006;27:2907–2915. doi: 10.1016/j.biomaterials.2006.01.017
36.
TamuraH, MitaK, TanakaA, Mechanism of hydroxylation of metal oxide surfaces. J Colloid Interface Sci. 2001;243:202–207. doi: 10.1006/jcis.2001.7864
37.
RohanizadehR, Al-SadeqM, LeGerosRZ.Preparation of different forms of titanium oxide on titanium surface: effects on apatite deposition. J Biomed Mater Res A. 2004;71:343–352. doi: 10.1002/jbm.a.30171
38.
TanakaY, SaitoH, TsutsumiY, Active hydroxyl groups on surface oxide film of titanium, 316L stainless steel, and cobalt-chromium-molybdenum alloy and its effect on the immobilization of poly(ethylene glycol). Mater Trans. 2008;49:805–811. doi: 10.2320/matertrans.MRA2007317
39.
GuoJ, CaiX, LiY, The preparation and characterization of a three-dimensional titanium dioxide nanostructure with high surface hydroxyl group density and high performance in water treatment. Chem Eng J. 2013;221:342–352. doi: 10.1016/j.cej.2013.02.005
40.
CuiX, KimHM, KawashitaM, Preparation of bioactive titania films on titanium metal via anodic oxidation. Dent Mater. 2009;25:80–86. doi: 10.1016/j.dental.2008.04.012
41.
YangB, UchidaM, KimHM, Preparation of bioactive titanium metal via anodic oxidation treatment. Biomaterials. 2004;25:1003–1010. doi: 10.1016/S0142-9612(03)00626-4
42.
KumarKCN, TandonT, SiloriP, Biomechanical stress analysis of a human femur bone using ANSYS. Mater Today Proc. 2015;2:2115–2120. doi: 10.1016/j.matpr.2015.07.211
