Plasma transferred arc (PTA) welding methods were used to produce titanium carbide (TiC) composite coating layers on the surface of 38MnVS6 steel and subsequently deep cryogenic treatment (DCT) was applied to the PTA coating layers. The effects of the TiC powder, different energy inputs (100 and 120A), and DCT on the microstructure and tribological performance were investigated. The microstructure of the composite coatings consisted of cubic TiC, unmelted TiC, and iron matrix. The alloyed and cryogenic treated surfaces exhibited decreases in the coefficient of friction (COF) and wear rate. The average COF of the steel substrate was determined to be 0.373, but for the TiC composite coating layers it varied between 0.236 and 0.33. PTA coating and DCT processes improved the wear resistance 4.5 times compared to the substrate.
BuytozS, OrhanA, GurAK, Microstructural development of Fe-Cr-C and B4C powder alloy coating on stainless steel by plasma-transferred arc weld surfacing. Arab J Sci Eng. 2013;38(8):2197–2204. doi: 10.1007/s13369-013-0599-9
4.
RokanopoulouA, PapadimitriouGD.Titanium carbide/duplex stainless steel (DSS) metal matrix composite coatings prepared by the plasma transferred arc (PTA) technique: microstructure and wear properties. J Coat Technol Res. 2011;8(3):427–437. doi: 10.1007/s11998-010-9283-0
5.
BourithisL, PapadimitriouGD.The effect of microstructure and wear conditions on the wear resistance of steel metal matrix composites fabricated with PTA alloying technique. Wear. 2009;266(11–12):1155–1164. doi: 10.1016/j.wear.2009.03.032
6.
YuanYL, LiZG.Microstructure and wear performance of high volume fraction carbide M7C3 reinforced Fe-based composite coating fabricated by plasma transferred arc welding. J Wuhan Univ Technol. 2014;29(5):1028–1035. doi: 10.1007/s11595-014-1038-9
7.
WangXB.The metallurgical behavior of B4C in the iron-based surfacing alloy during PTA powder surfacing. Appl Surf Sci. 2005;252(5):2021–2028. doi: 10.1016/j.apsusc.2005.03.171
8.
FloresJF, NevilleA, KapurN, Erosion-corrosion degradation mechanisms of Fe-Cr-C and WC-Fe-Cr-C PTA overlays in concentrated slurries. Wear. 2009;267(11):1811–1820. doi: 10.1016/j.wear.2009.02.005
9.
HouQY, GaoJS, ZhouF.Microstructure and wear characteristics of cobalt-based alloy deposited by plasma transferred arc weld surfacing. Surf Coat Technol. 2005;194(2–3):238–243. doi: 10.1016/j.surfcoat.2004.07.065
GuoLJ, WangXB, ZangPP, In situ synthesis ZrB2/Fe cladding layer by PTA process. Surf Eng. 2012;28(10):767–771. doi: 10.1179/1743294412Y.0000000062
12.
QunshuangM, YajiangL, JuanW.Surface modification of Q550 HSLA steel with Co–Fe–Cr composite coatings manufactured by fibre laser cladding. Surf Eng. 2016;32(12):934–942. doi: 10.1080/02670844.2016.1176717
13.
SinghS, KaurM.Mechanical and microstructural properties of NiCrFeSiBC/Cr3C2 composite coatings – part I. Surf Eng. 2016;32(7):464–474. doi: 10.1179/1743294414Y.0000000416
14.
SinghS, KaurM.Solid particle erosion behaviour of NiCrFeSiBC/Cr3C2 composite coatings – part II. Surf Eng. 2016;32(7):475–489. doi: 10.1179/1743294414Y.0000000419
15.
ArunaST, SrinivasG.Wear and corrosion resistant properties of electrodeposited Ni composite coating containing Al2O3-TiO2 composite powder. Surf Eng. 2015;31(9):708–713. doi: 10.1179/1743294415Y.0000000050
16.
ShiKY, HuSB, XuW, Surface treatment of 45 steels by plasma beam alloying and plasma surface quenching. Adv Mater Res-Switz. 2010;129–131:1109–1113. doi: 10.4028/www.scientific.net/AMR.129-131.1109
17.
ShiKY, HuSB, ZhengHF.On microstructure and fatigue characterisation of cast iron alloyed with PTA deposits. Surf Eng. 2012;28(2):113–121. doi: 10.1179/1743294411Y.0000000066
18.
DuBS, WangXH, ZouZD.Microstructure and tribological behavior of laser in situ synthesized TiC-reinforced Fe-based composite coatings. Tribol Lett. 2011;43(3):295–301. doi: 10.1007/s11249-011-9808-4
19.
ModiOP, PrasadBK, JhaAK, Effects of material composition and microstructural features on dry sliding wear behaviour of Fe-TiC composite and a cobalt-based stellite. Tribol Lett. 2004;17(2):129–138. doi: 10.1023/B:TRIL.0000032437.23201.bb
20.
AminiK, NateghS, ShafyeiA.Influence of different cryotreatments on tribological behavior of 80CrMo12 5 cold work tool steel. Mater Design. 2010;31(10):4666–4675. doi: 10.1016/j.matdes.2010.05.028
21.
SenthilkumarD, RajendranI.Optimization of deep cryogenic treatment to reduce wear loss of 4140 steel. Mater Manuf Process. 2012;27(5):567–572. doi: 10.1080/10426914.2011.593237
22.
BaldisseraP, DelpreteC.Deep cryogenic treatment: a bibliographic review. Open Mech Eng J. 2008;2:1–11. doi: 10.2174/1874155X00802010001
23.
BenselyA, PrabhakaranA, LalDM, Enhancing the wear resistance of case carburized steel (En 353) by cryogenic treatment. Cryogenics. 2005;45(12):747–754. doi: 10.1016/j.cryogenics.2005.10.004
24.
FirouzdorV, NejatiE, KhomamizadehF.Effect of deep cryogenic treatment on wear resistance and tool life of M2 HSS drill. J Mater Process Technol. 2008;206(1–3):467–472. doi: 10.1016/j.jmatprotec.2007.12.072
25.
HongC, GuDD, DaiDH, Laser metal deposition of TiC/Inconel 718 composites with tailored interfacial microstructures. Opt Laser Technol. 2013;54:98–109. doi: 10.1016/j.optlastec.2013.05.011
26.
IdrissANM, MalequeMA, YaacobII, Microstructural aspects of wear behaviour of TiC coated low alloy steel. Mater Sci Technol-Lond. 2016;32(4):303–307. doi: 10.1080/02670836.2016.1142049
27.
LugscheiderE, KnotekO, BobzinK, Tribological properties, phase generation and high temperature phase stability of tungsten- and vanadium-oxides deposited by reactive MSIP-PVD process for innovative lubrication applications. Surf Coat Technol. 2000;133–134:362–368. doi: 10.1016/S0257-8972(00)00963-4
