The previous investigation suggested the approach for an in situ formation of Cr2O3 diffusion barrier by annealing the cold-sprayed Ni coatings on 310SS. In this paper, the influences of annealing conditions on the growth kinetics of Cr2O3 and substrate microstructure were investigated. Results show that Cr2O3 formed at the selected annealing temperatures of 850, 900 and 950°C for different durations of 4, 8 and 20 h. Increasing temperature enhanced the growth kinetics of Cr2O3 and the Mn content in the oxide layer. The annealing process for the growth of Cr2O3 improves the coating adhesion compared to the as-deposited coating. However, annealing at 950°C resulted in the precipitation of chromium carbides and enhanced the element inter-diffusion across the substrate/coating interface.
DelpechS., CabetC., SlimC. and PicardG. S.: ‘Molten fluorides for nuclear applications', Mater. Today, 2010,
13, 34–41. doi: 10.1016/S1369-7021(10)70222-4
2.
OlsonL. C.: ‘Materials corrosion in molten LiF-NaF-KF eutectic salt', Ph.D. Thesis, University of Wisconsin-Madison, 2009.
3.
WangQ. M., ZhangK., GongJ., CuiY. Y., SunC. and WenL. S.: ‘Nicocraly coatings with and without an Al2O3/Al interlayer on an orthorhombic Ti2AlNb-based alloy: oxidation and interdiffusion behaviors', Acta Mater., 2007,
55, 1427–1439. doi: 10.1016/j.actamat.2006.09.044
4.
UribeE., SalasO., Melo-MaximoD., OsegueraJ., LepienskiC. M., TorresR. D. and SouzaR. M.: ‘Development of Al oxide PVD coatings against metal dusting’, Surf. Eng., 2015,
31, 114–122. doi: 10.1179/1743294414Y.0000000322
5.
HosseiniS. H., MirdamadiS. and RastegariS.: ‘Investigating efficiency of α-Al2O3 diffusion barrier layer in oxidation of EB-PVD NiCrAlY coatings', Surf. Eng., 2015,
31, 146–155. doi: 10.1179/1743294414Y.0000000365
6.
ReichertK.: ‘Thermal stability of Al–O–N PVD films and comparison with Al2O3 films as diffusion barriers: shortlisted’, Surf. Eng., 1999,
15, 163–167. doi: 10.1179/026708499101516399
7.
XuY., LiangW., MiaoQ., RenB., YaoZ., ZhangP. and WeiD.: ‘High temperature oxidation behaviour of Al2O3/Al composite coating on γ-TiAl’, Surf. Eng., 2015,
31, 354–360. doi: 10.1179/1743294414Y.0000000363
8.
GuoC. A., WangW., ChengY. X., ZhuS. L. and WangF. H.: ‘Yttria partially stabilised zirconia as diffusion barrier between NiCrAlY and Ni-base single crystal rené N5 superalloy’, Corros. Sci., 2015,
94, 122–128. doi: 10.1016/j.corsci.2015.01.048
9.
XuY.-X., LuoX.-T., LiC.-X., YangG.-J. and LiC.-J.: ‘Formation of Cr2O3 diffusion barrier between Cr-contained stainless steel and cold-sprayed Ni coatings at high temperature’, J. Therm. Spray Technnol., 2015,
25, 526–534. doi: 10.1007/s11666-015-0371-7
10.
WildR. K.: ‘High temperature oxidation of austenitic stainless steel in low oxygen pressure’, Corros. Sci., 1977,
17, 87–104. doi: 10.1016/0010-938X(77)90011-7
11.
HuntzA. M., ReckmannA., HautC., SévéracC., HerbstM., ResendeF. C. T. and SabioniA. C. S.: ‘Oxidation of AISI 304 and AISI 439 stainless steels', Mater. Sci. Eng. A, 2007,
447, 266–276. doi: 10.1016/j.msea.2006.10.022
12.
PaulA., SanchezR., MontesO. M. and OdriozolaJ. A.: ‘The role of silicon in the reactive-elements effect on the oxidation of conventional austenitic stainless steel’, Oxid. Met., 2007,
67, 87–105. doi: 10.1007/s11085-006-9046-6
13.
HuntzA. M., BagueV., BeaupleG., HautC., SeveracC., LecourP., LongaygueX. and RopitalF.: ‘Effect of silicon on the oxidation resistance of 9% Cr steels', Appl. Surf. Sci., 2003,
207, 255–275. doi: 10.1016/S0169-4332(02)01505-2
14.
TunthawiroonP., LiY., TangN., KoizumiY. and ChibaA.: ‘Effects of alloyed Si on the oxidation behaviour of Co–29Cr–6Mo alloy for solid-oxide fuel cell interconnects', Corros. Sci., 2015,
95, 88–99. doi: 10.1016/j.corsci.2015.02.036
15.
ThuanD. N., ZhangJ. Q. and DavidY.: ‘Effects of silicon on high temperature corrosion of Fe–Cr and Fe–Cr–Ni alloys in carbon dioxide’, Oxid. Met., 2014,
81, 549–574. doi: 10.1007/s11085-013-9467-y
16.
SatoI., TakakiM., ArimaT., FuruyaH., IdemitsuK., InagakiY., MomodaM. and NamekawaT.: ‘Oxidation behavior of modified SUS316 (PNC316) stainless steel under low oxygen partial pressure’, J. Nucl. Mater., 2002,
304, 21–28. doi: 10.1016/S0022-3115(02)00872-3
17.
ZhouY. H., LiY. M., LiuY. C., GuoQ. Y., LiuC. X., YuL. M., LiC. and LiH. J.: ‘Precipitation behavior of type 347H heat-resistant austenitic steel during long-term high-temperature aging’, J. Mater. Res., 2015,
30, 3642–3652. doi: 10.1557/jmr.2015.343
18.
PommierH., BussoE. P., MorgeneyerT. F. and PineauA.: ‘Intergranular damage during stress relaxation in AISI 316L-type austenitic stainless steels: effect of carbon, nitrogen and phosphorus contents', Acta Mater., 2016,
103, 893–908. doi: 10.1016/j.actamat.2015.11.004
19.
WangL. J., ShengL. Y. and HongC. M.: ‘Influence of grain boundary carbides on mechanical properties of high nitrogen austenitic stainless steel’, Mater. Des., 2012,
37, 349–355. doi: 10.1016/j.matdes.2012.01.024
