Characterisation of thin α-Al 2 O 3 tribo-coating deposited by low-power gas tunnel plasma spray

Abstract

This study used a unique, low-power (2.8 kW) gas tunnel plasma spray and γ-Al₂O₃ feedstock powder to deposit a thin Al₂O₃ coating (<2 µm) on mild steel substrate. By optimising the plasma gas flow rate, powder feed rate, spraying time, and distance, a dense and homogeneous Al₂O₃ coating was obtained at a very high deposition rate (150 nm/s). During plasma coating, the high energy density plasma transforms the γ-Al₂O₃ powder into a highly crystalline α-Al₂O₃ as the predominant microstructure of the coating. The performance of the Al₂O₃ coating on mild steel was then evaluated preliminary using a linear sliding wear test against a chrome-steel ball, with the results indicating an 18–26% reduction in wear when compared to the uncoated substrate.