Nitrogen ions were implanted at different energies of 15, 30, 45 and 60 keV and with the flux of 1017 N+cm−2 inside the nickel layers that have been deposited on the 304 stainless steel using the electron gun method at room temperature. XRD patterns showed different crystalline phases of nickel nitride for the implanted samples. The surface morphology was extracted by MountainsMap software's using statistical data from AFM analysis. In addition, a potentiodynamic polarisation test was performed in a 3.5% NaCl solution to study the corrosion behaviour. These studies revealed that corrosion was directly related to the deposition parameters, mainly the implantation energy, modifying the surface so that the highest corrosion resistance was obtained for the sample implanted with 60 keV.
AbbassMKAjeelSAWadullahHM.Biocompatibility, bioactivity and corrosion resistance of stainless steel 316L nanocoated with TiO2 and Al2O3 by atomic layer deposition method. J Phys: Conf Ser. 2018;1032:012017. doi:10.1088/1742-6596/1032/1/012017.
2.
AbdeenDHEl HachachMKocMA review on the corrosion behaviour of nanocoatings on metallic substrates. Materials (Basel). 2019;12 (2):210. doi:10.3390/ma12020210.
3.
AbdiFSavaloniH. Corrosion Inhibition of AISI304 Stainless Steel by Graphen Oxide Coating, 2019. Available from: https://arar.sci.am/dlibra/publication/26357 (accessed October 3, 2021).
4.
AherwarA.Manufacturing and evaluation of corrosion resistance of nickel-added Co–30Cr–4Mo metal alloy for orthopaedic biomaterials. In: BainsPS, SidhuSS, BahraminasabM, PrakashC, editors. Biomaterials in orthopaedics and bone regeneration: design and synthesis. Singapore: Springer; 2019. p. 159–174. doi:10.1007/978-981-13-9977-0_11.
5.
BekmurzayevaADuncansonWJAzevedoHSSurface modification of stainless steel for biomedical applications: revisiting a century-old material. Mater Sci Eng C. 2018;93:1073–1089. doi:10.1016/j.msec.2018.08.049.
6.
FerreiraCPde CastroMdMRTentardiniEKSilicon influence on corrosion resistance of magnetron sputtered ZrN and ZrSiN thin films. Surf Eng. 2020;36 (1):33–40. doi:10.1080/02670844.2018.1548100.
7.
GeethaMSinghAKAsokamaniRTi based biomaterials, the ultimate choice for orthopaedic implants – a review. Prog Mater Sci. 2009;54 (3):397–425. doi:10.1016/j.pmatsci.2008.06.004.
8.
NingshenSKamachi MudaliURamyaSCorrosion behaviour of AISI type 304L stainless steel in nitric acid media containing oxidizing species. Corros Sci. 2011;53 (1):64–70. doi:10.1016/j.corsci.2010.09.023.
9.
SavaloniHAgha-TaheriEAbdiF.On the corrosion resistance of AISI 316L-type stainless steel coated with manganese and annealed with flow of oxygen. J Theor Appl Phys. 2016;10 (2):149–156. doi:10.1007/s40094-016-0213-0.
10.
ShakouryRKorpiAGGhoshKStereometric and scaling law analysis of surface morphology of stainless steel type AISI 304 coated with Mn: a conventional and fractal evaluation. Mater Res Express. 2019;6 (11):116436. doi:10.1088/2053-1591/ab4aa6.
11.
StachSGarczykŻŢăluŞStereometric parameters of the Cu/Fe NPs thin films. J Phys Chem C. 2015;119 (31):17887–17898. doi:10.1021/acs.jpcc.5b04676.
12.
WangK.-K.KimB.-J.HeoI., Fabrication and characterization of antimicrobial surface-modified stainless steel for bio-application. Surf Coat Technol. 2017;310:256–262. doi:10.1016/j.surfcoat.2016.12.088.
13.
BerteroEHasegawaMStaubliSElectrodeposition of amorphous Fe-Cr-Ni stainless steel alloy with high corrosion resistance, low cytotoxicity and soft magnetic properties. Surf Coat Technol. 2018;349:745–751. doi:10.1016/j.surfcoat.2018.06.003.
14.
FauvetPBalbaudFRobinRCorrosion mechanisms of austenitic stainless steels in nitric media used in reprocessing plants. J Nucl Mater. 2008;375 (1):52–64. doi:10.1016/j.jnucmat.2007.10.017.
15.
KainVDePk.Controlling corrosion in the back end of fuel cycle using nitric acid grade stainless steels. Int J Nucl Energy Sci Technol. 2005;1 (2/3):220–231. doi:10.1504/IJNEST.2005.007146.
16.
ModiriFSavaloniH.A study of the corrosion of stainless steel 304L coated with a 190 nm-thick manganese layer and annealed with nitrogen flux in a 0.4-mole solution of H2SO4 at different temperatures. J Theor Appl Phys. 2020;14 (1):21–35. doi:10.1007/s40094-019-00345-5.
NingshenSSakairiM.Corrosion degradation of AISI type 304L stainless steel for application in nuclear reprocessing plant. J Solid State Electrochem. 2015;19 (12):3533–3542. doi:10.1007/s10008-015-2891-y.
19.
Grayeli KorpiARBahmanpourKM.Effect of nitriding temperature on the nanostructure and corrosion properties of nickel coated 304 stainless steel. Progress Color Color Coat. 2017;10:85–92. doi:10.30509/pccc.2017.75719.
20.
TokarzAFrT. Structure, hardness and thermal stability of electrodeposited Cu/Ni nanostructured multilayers, (n.d.) 6.
21.
Grayeli KorpiARBalashabadiPLarijaniMMEffect of gas ratio on tribological and corrosion properties of ion beam sputter deposited TiN coatings. Progress Color, Color Coat. 2018;11:129–135. doi:10.30509/pccc.2018.75745.
22.
Grayeli KorpiARBahmanpourKM.Influence of nitrogen ion implantation on the nanostructure and corrosivity of Ni/stainless steel substrates. Prog Color Color Coat. 2016;9:77–83. doi:10.30509/pccc.2016.75879.
23.
PooleCPOwensFJ.Introduction to nanotechnology. John Wiley & Sons, Inc., Hoboken, New Jersey, USA; 2003.
24.
Levintant-ZayontsNStarzyńskiGKucharskiS.Effect of N ion implantation on tribological properties of spring steels. Appl Surf Sci. 2022;591:153117. doi:10.1016/j.apsusc.2022.153117.
25.
LiuWManQLiJMicrostructural evolution and vibration fatigue properties of 7075-T651 aluminum alloy treated by nitrogen ion implantation. Vacuum. 2022;199:110931. doi:10.1016/j.vacuum.2022.110931.
26.
XuCLiuXLiYMicrostructural and mechanical properties of nitrogen ion irradiated 316 stainless steel. Nucl Technol. 2022;208 (6):1083–1088. doi:10.1080/00295450.2021.1997058.
27.
FuYWuXHanE-HEffects of nitrogen on the passivation of nickel-free high nitrogen and manganese stainless steels in acidic chloride solutions. Electrochim Acta. 2009;54 (16):4005–4014. doi:10.1016/j.electacta.2009.02.024.
28.
Grayeli KorpiAArmanAJurečkaSImproving the corrosion resistance of Ni/SS thin films by nitrogen ion implantation. Acta Phys Pol A. 2019;136 (3):536–541. doi:10.12693/APhysPolA.136.536.
29.
MuthupandiVBala SrinivasanPShankarVEffect of nickel and nitrogen addition on the microstructure and mechanical properties of power beam processed duplex stainless steel (UNS 31803) weld metals. Mater Lett. 2005;59 (18):2305–2309. doi:10.1016/j.matlet.2005.03.010.
30.
KorpiAGŢăluŞBramowiczMMinkowski functional characterization and fractal analysis of surfaces of titanium nitride films. Mater Res Express. 2019;6 (8):086463. doi:10.1088/2053-1591/ab26be.
31.
ShakouryRArmanAŢăluŞStereometric analysis of TiO2 thin films deposited by electron beam ion assisted. Opt Quant Electron. 2020;52 (5):270. doi:10.1007/s11082-020-02388-4.
32.
ŢăluŞBramowiczMKuleszaSSurface morphology analysis of composite thin films based on titanium-dioxide nanoparticles. Acta Phys Pol A. 2017;131 (6):1529–1533. doi:10.12693/APhysPolA.131.1529.
33.
RezaeeSArmanAJurečkaSEffect of annealing on the micromorphology and corrosion properties of Ti/SS thin films. Superlattices Microstruct. 2020;146:106681. doi:10.1016/j.spmi.2020.106681.
34.
ArmanAŢăluŞLunaCMicromorphology characterization of copper thin films by AFM and fractal analysis. J Mater Sci: Mater Electron. 2015;26 (12):9630–9639. doi:10.1007/s10854-015-3628-5.
35.
NaseriNSolaymaniSGhaderiAMicrostructure, morphology and electrochemical properties of Co nanoflake water oxidation electrocatalyst at micro- and nanoscale. RSC Adv. 2017;7 (21):12923–12930. doi:10.1039/C6RA28795F.
36.
StachSSapotaWŢăluŞ3-D surface stereometry studies of sputtered TiN thin films obtained at different substrate temperatures. J Mater Sci: Mater Electron. 2017;28 (2):2113–2122. doi:10.1007/s10854-016-5774-9.
37.
MwemaFMAkinlabiETOladijoOPChapter two - advances in manufacturing analysis: fractal theory in modern manufacturing. In: KumarK, DavimJP, editors. Modern manufacturing processes. Woodhead, Amsterdam, The Netherlands; 2020. p. 13–39. doi:10.1016/B978-0-12-819496-6.00002-6.
38.
TaluSStachSValedbagiSMultifractal characteristics of titanium nitride thin films. Mater Sci Pol. 2015;33(3):541–548. doi:10.1515/msp-2015-0086.
39.
ŢăluŞStachSMéndezAMultifractal characterization of nanostructure surfaces of electrodeposited Ni-P coatings. J Electrochem Soc. 2013;161:D44. doi:10.1149/2.039401jes.
40.
ŢăluŞBramowiczMKuleszaSFractal features of carbon–nickel composite thin films. Microsc Res Tech. 2016;79 (12):1208–1213. doi:10.1002/jemt.22779.
41.
ŢăluŞMorozovIAYadavRP.Multifractal analysis of sputtered indium tin oxide thin film surfaces. Appl Surf Sci. 2019;484:892–898. doi:10.1016/j.apsusc.2019.04.170.
42.
ValléeCBonvalotMBelahcenSPlasma deposition – impact of ions in plasma enhanced chemical vapor deposition, plasma enhanced atomic layer deposition, and applications to area selective deposition. J Vac Sci Technol A. 2020;38 (3):033007. doi:10.1116/1.5140841.
43.
BasahelSNAliTTMokhtarMInfluence of crystal structure of nanosized ZrO2 on photocatalytic degradation of methyl orange. Nanoscale Res Lett. 2015;10 (1):73. doi:10.1186/s11671-015-0780-z.
44.
GottardiGLaidaniNMicheliVEffects of oxygen concentration in the Ar/O2 plasma on the bulk structure and surface properties of RF reactively sputtered zirconia thin films. Surf Coat Technol. 2008;202 (11):2332–2337. doi:10.1016/j.surfcoat.2007.08.052.
45.
RebibFLaidaniNGottardiGInvestigation of structural and optical properties of sputtered zirconia thin films. Euro Phys J Appl Phys. 2008;43 (3):363–368. doi:10.1051/epjap:2008129.
46.
ShakouryRTalebaniNZelatiAThe effect of thickness and film homogeneity on the optical and microstructures of the ZrO2 thin films prepared by electron beam evaporation method. Opt Quant Electron. 2021;53 (8):441. doi:10.1007/s11082-021-03079-4.
47.
ŢăluŞYadavRPMittalAKApplication of Mie theory and fractal models to determine the optical and surface roughness of Ag–Cu thin films. Opt Quant Electron. 2017;49 (7):256. doi:10.1007/s11082-017-1079-3.
48.
YanCZengQHeWEnhanced surface hardness and tribocorrosion performance of 60NiTi by boron ion implantation and post-annealing. Tribol Int. 2021;155:106816. doi:10.1016/j.triboint.2020.106816.
49.
DouZGuoYZhangFEffect of low-energy nitrogen ion implantation on friction and wear properties of Ion-plated TiC coating. Coatings. 2021;11 (7):775. doi:10.3390/coatings11070775.
50.
WhitehouseDJ.Handbook of surface and nanometrology. New York: Taylor & Francis; 2002. doi:10.1201/9781420034196.
51.
YuNPolycarpouAA.Contact of rough surfaces with asymmetric distribution of asperity heights. J Tribol. 2001;124 (2):367–376. doi:10.1115/1.1403458.
52.
TayebiNPolycarpouAA.Modeling the effect of skewness and kurtosis on the static friction coefficient of rough surfaces. Tribol Int. 2004;37 (6):491–505. doi:10.1016/j.triboint.2003.11.010.
53.
AbdiFSavaloniH.Influence of N+ ion implantation at different temperatures on nanostructural modifications and characteristics of Al alloy surface. Philos Mag. 2016;96 (13):1305–1317. doi:10.1080/14786435.2016.1162912.
54.
AbdiFSavaloniH.Surface nanostructure modification of Al substrates by N+ ion implantation and their corrosion inhibition. T Nonferr Metal Soc China. 2017;27 (3):701–710. doi:10.1016/S1003-6326(17)60078-5.
55.
CristóbalMJFigueroaRMeraLTribological behaviour of aluminium alloy AA7075 after ion implantation. Surf Coat Technol. 2012;209:124–130. doi:10.1016/j.surfcoat.2012.08.050.
56.
FigueroaRAbreuCMCristóbalMJEffect of nitrogen and molybdenum ion implantation in the tribological behavior of AA7075 aluminum alloy. Wear. 2012;276–277:53–60. doi:10.1016/j.wear.2011.12.005.
57.
HapsariSSujitnoTAhmadiHAnalysis of nitrogen ion implantation on the corrosion resistance and mechanical properties of aluminum alloy 7075. J Phys: Conf Ser. 2020;1436 (1):012075. doi:10.1088/1742-6596/1436/1/012075.
58.
FrancoLASinatoraA.3D surface parameters (ISO 25178-2): actual meaning of Spk and its relationship to Vmp. Prec Eng. 2015;40:106–111. doi:10.1016/j.precisioneng.2014.10.011.
59.
LeachR., Chapter one – Introduction to Surface Topography. In: R. Leach, editors. Characterisation of Areal Surface Texture. Springer-Verlag, Berlin Heidelberg, Germany, 2013. p. 1–13. doi:10.1007/978-3-642-36458-7.
60.
BarányiICzifraÁKalácskaG.Height-independent topographic parameters of worn surfaces. IJSMED. 2011;2 (1):35–40. doi:10.21825/scad.v2i1.20433.
61.
ŢTăluŞJanusKStachS.Nanoscale patterns in carbon–nickel nanocomposite thin films investigated by AFM and stereometric analysis. Int J Mater Struct Integrity. 2017;4, 54–62.
MatosRSPintoEPRamosGQStereometric characterization of kefir microbial films associated with Maytenus rigida extract. Microsc Res Tech. 2020;83 (11):1401–1410. doi:10.1002/jemt.23532.
64.
ŢăluŞStachSSueirasVFractal analysis of AFM images of the surface of Bowman's membrane of the human cornea. Ann Biomed Eng. 2014. doi:10.1007/s10439-014-1140-3.
65.
JacobsTDBJungeTPastewkaL.Quantitative characterization of surface topography using spectral analysis. Surf Topogr: Metrol Prop. 2017;5 (1):013001. doi:10.1088/2051-672X/aa51f8.
