Combined shear-compression tests were conducted to AZ31B magnesium alloy through shear-compression specimen (SCS) and the deformation response process is captured by digital image correlation technology. The mechanical behaviours and deformation characteristics of SCS with different loading angles are analysed in detailed. Results show that the strain path of SCS is sensitive to the loading angle. The deformation behaviour at initial stage exhibits proportional loading and related to the tangent loading angle which reveals the designability of SCS for mechanical testing with specific requirements.
MalikAWangYNazeerFEffect of pre-compression on changes in texture and yielding behavior of ZK61 Mg alloy. Vacuum. 2020;172:109039.
2.
LiJWangY.Impact of pre-straining on the hardness and anisotropic mechanical behavior of ZK61 Mg alloy. Vacuum. 2020;178:109465.
3.
ChenHLiuTHouDImproving the mechanical properties of a hot-extruded AZ31 alloy by {101¯2} twinning lamella. J Alloys Compd. 2016;680:191–197.
4.
WangQBertoliniRBruschiSAnisotropic fracture behavior of AZ31 magnesium alloy sheets as a function of the stress state and temperature. Int J Mech Sci. 2019;163:105146.
5.
Al-ZubaydiAFigueiredoRBHuangYStructural and hardness inhomogeneities in Mg–Al–Zn alloys processed by high-pressure torsion. J Mater Sci. 2013;48(13):4661–4670.
6.
BarylskiAKupkaMAniołekKThe effect of precipitation hardening on the structure and mechanical and tribological properties of magnesium alloy WE54. Vacuum. 2017;139:77–86.
7.
YangCShiBPengYLoading path dependent distortional hardening of Mg alloys: experimental investigation and constitutive modeling on cruciform specimens. Int J Mech Sci. 2019;160:282–297.
8.
NazeerFHassan NaqviSZKalamATexture dependences on flow stress behavior of magnesium alloy under dynamic compressive loading. Vacuum. 2021;191:110323.
9.
YanJSunYXueFCreep deformation mechanism of magnesium-based alloys. J Mater Sci. 2008;43(21):6952–6959.
10.
NingFZhouXLeQFracture and deformation characteristics of AZ31 magnesium alloy plate during tension rolling. Mater Today Commun. 2020;24:101129.
11.
ChenHLiuTYuHDependence of microstructure and hardening behavior on torsion strain and strain rate in extruded AZ31 rods. Adv Eng Mater. 2016;18(9):1683–1689.
12.
ShuaiLShi-ShanLYu-TingZDeformation behavior of the Al-5.9Zn-2.1Mg-2.1Cu (wt-%) alloy during isothermal pressure-holding after pre-deformation. Mater Today Commun. 2021;29:102821.
13.
YangCLiuHYangBThe effect of pre-twinning on the mechanical behavior of free-end torsion for an extruded AZ31 magnesium alloy. Mater Sci Eng A. 2019;743:391–396.
14.
ClicheNRavi-ChandarK.Dynamic strain localization in magnesium alloy AZ31B-O. Mech Mater. 2018;116:189–201.
15.
WangZQiuJShuXExperimental study on the fracture behavior of AZ91D magnesium alloy under complex loading. Results Phys. 2020;16:102917.
16.
YangCShiBPengYTransition from convex to concave of equal plastic work contours for wrought magnesium alloy under multi-axial loading. Int J Solids Struct. 2018;150:117–124.
17.
YangBDongYGuoDAnisotropic mechanical behavior and corresponding microstructure evolution of extruded AZ31 under combined normal/shear stress states. Mater Sci Eng A. 2019;760:415–425.
18.
KabirianFKhanASGnäupel-HerlodT.Visco-plastic modeling of mechanical responses and texture evolution in extruded AZ31 magnesium alloy for various loading conditions. Int J Plast. 2015;68:1–20.
19.
KangG-zLiH.Review on cyclic plasticity of magnesium alloys: experiments and constitutive models. Int J Miner Metall Mater. 2021;28(4):567–589.
20.
MengYGaoHYanYEffects of phase difference and stress ratio on biaxial tension–tension fatigue crack propagation behavior of rolled ZK60 magnesium alloy. Mater Today Commun. 2020;24:101159.
21.
SteglichDBessonJ.Prediction of deformation and failure anisotropy for thin magnesium sheets under mixed-mode loading. Mech Mater. 2021;163:104064.
22.
ChandolaNLebensohnRACazacuOCombined effects of anisotropy and tension–compression asymmetry on the torsional response of AZ31 Mg. Int J Solids Struct. 2015;58:190–200.
23.
LvLShaoLDLinHDeformation and mechanical responses of AZ31B magnesium alloy under combined shear-compression loading conditions. Mater Today Commun. 2022;103551.
24.
JinTZhouZQiuJInvestigation on the yield behavior of AZ91 magnesium alloy. J Alloys Compd. 2018;738:79–88.
25.
DorogoyA.Numerical validation of the shear compression specimen. Part I: quasi-static large strain testing. Exp Mech. 2005;45(2):167–177.
26.
JinTZhouZShuXExperimental investigation on the yield loci of PA66. Polym Test. 2016;51:148–150.
27.
JinTZhouZShuXInvestigation on the yield behaviour and macroscopic phenomenological constitutive law of PA66. Polym Test. 2018;69:563–582.
28.
SlooffFAZhouJDuszczykJStrain-dependent constitutive analysis of three wrought Mg–Al–Zn alloys. J Mater Sci. 2008;43(22):7165–7170.
29.
RebergueGBlaysatBChanalHIn-situ measurement of machining part deflection with digital image correlation. Measurement (Mahwah N J). 2022;187:110301.
