A TRIP-aided bainitic-ferritic (TBF) steel with a chemical composition of Fe–0.19C–1.7Mn–1.09Si–0.51Al–0.05Nb (wt-%) was partially austenitised from a hot-rolled martensitic initial microstructure. After the hot rolling, the martensitic specimens were reheated to different intercritical temperatures and then austempered at 350°C. Thus, the effect of the initial microstructure of TBF steel on intercritical austenite formation during partial austenitisation was studied. The microstructures were investigated by scanning electron microscopy and electron backscatter diffraction (EBSD), and the tensile properties were tested. Microstructural observations revealed that a final microstructure of fine ferrite, bainitic ferrite, and retained austenite can be obtained. The steel partial austenitised at 770°C showed a good combination of ultimate tensile strength and total elongation.
SarkarSMilitzerM.Microstructure evolution model for hot strip rolling of Nb–Mo microalloyed complex phase steel. Mater Sci Technol. 2009;25(9):1134–1146.
2.
ContrerasALópezAGutiérrezEJAn approach for the design of multiphase advanced high-strength steels based on the behavior of CCT diagrams simulated from the intercritical temperature range. Mater Sci Eng A. 2020;772:138708.
3.
BleckWBrühlFMaYMaterials and processes for the third-generation advanced high-strength steels. BHM Berg-und Hüttenmännische Monatshefte. 2019;164(11):466–474.
4.
LeschCKwiatonNKloseFB.Advanced high strength steels (AHSS) for automotive applications − tailored properties by smart microstructural adjustments. Steel Res Int. 2017;88(10):1700210.
5.
DongRZhaoAMDingRMicrostructure and mechanical properties of TRIP-aided steels with different heat treatments. In: YafangHanXuefengLiuYingWu, editors. Materials science forum. Baech, Switzerland: Trans Tech Publications Ltd. 2015. Vol. 817, pp. 439–443.
6.
SugimotoKIIidaTSakaguchiJRetained austenite characteristics and tensile properties in a TRIP type bainitic sheet steel. ISIJ Int. 2000;40(9):902–908.
7.
MurataTHamamotoSUtsumiYCharacteristics of 1180 MPa grade cold-rolled steel sheets with excellent formability. Kobelco Technol Rev. 2017;45:17–20.
8.
HojoTKumaiBKoyamaMHydrogen embrittlement resistance of pre-strained ultra-high-strength low alloy TRIP-aided steel. Int J Fract. 2020;224(2):253–260.
SugimotoKIYuBMukaiYIMicrostructure and formability of aluminum bearing TRIP-aided steels with annealed martensite matrix. ISIJ Int. 2005;45(8):1194–1200.
11.
SugimotoKIKandaAKikuchiRDuctility and formability of newly developed high strength low alloy TRIP-aided sheet steels with annealed martensite matrix. ISIJ Int. 2002;42(8):910–915.
12.
LiYDingWWangB.Intercritical annealing pre-treatment used in a hot-dip galvanised TRIP steel. Mater Sci Technol. 2019;35(11):1372–1380.
13.
ZhaoJJiangZ.Thermomechanical processing of advanced high strength steels. Prog Mater Sci. 2018;94:174–242.
14.
HashimotoSIkedaSSugimotoKIEffects of Nb and Mo addition to 0.2% C-1.5% Si-1.5% Mn steel on mechanical properties of hot rolled TRIP-aided steel sheets. ISIJ Int. 2004;44(9):1590–1598.
15.
SkálováLDivišováRJandováD.Thermo-mechanical processing of low-alloy TRIP-steel. J Mater Process Technol. 2006;175(1–3):387–392.
16.
DaiZChenHDingRFundamentals and application of solid-state phase transformations for advanced high strength steels containing metastable retained austenite. Mater Sci Eng R: Reports. 2021;143:100590.
17.
RamazaniAQuadeHAbbasiMThe effect of martensite banding on the mechanical properties and formability of TRIP steels. Mater Sci Eng A. 2016;651:160–164.
18.
ChenSCWangYTLinYCMicrostructure and mechanical behaviors of GPa-grade TRIP steels enabled by hot-rolling processes. Mater Sci Eng A. 2019;761:138005.
19.
QianLLiKHuangFEnhancing both strength and ductility of low-alloy transformation-induced plasticity steel via hierarchical lamellar structure. Scr Mater. 2020;183:96–101.
20.
LiXRamazaniAPrahlUQuantification of complex-phase steel microstructure by using combined EBSD and EPMA measurements. Mater Charact. 2018;142:179–186.
21.
GourguesA-FFlowerHMLindleyTC.Electron backscattering diffraction study of acicular ferrite, bainite, and martensite steel microstructures. Mater. Sci. Technol. 2000;16(1):26–40.
22.
PetrovRKestensLWasilkowskaAMicrostructure and texture of a lightly deformed TRIP-assisted steel characterized by means of the EBSD technique. Mater Sci Eng A. 2007;447(1–2):285–297.
23.
PinardPTSchwedtARamazaniACharacterization of dual-phase steel microstructure by combined submicrometer EBSD and EPMA carbon measurements. Microsc Microanal. 2013;19(4):996–1006.
Standard ASTM. E8 standard test method for tension testing of metallic materials. West Conshohocken (PA): ASTM; 2004.
26.
ErişirEBilirOG.Effect of intercritical annealing temperature on martensite and bainite start temperatures after partial austenitization. JOM. 2016;68(1):203–209.
27.
WrightSINowellMMFieldDP.A review of strain analysis using electron backscatter diffraction. Microsc Microanal. 2011;17(3):316–329.
28.
LeeSILeeJHwangB.Microstructure-based prediction of yield ratio and uniform elongation in high-strength bainitic steels using multiple linear regression analysis. Mater Sci Eng A. 2019;758:56–59.
29.
MayoUIsastiNRodríguez-IbabeJMAnalysis of strain partitioning in intercritically deformed microstructures via interrupted tensile tests. Metals (Basel). 2021;11(1):112.
30.
KangMParkMKimBEffect of heat treatment on microstructure and mechanical properties of high-strength steel for in hot forging products. Metals (Basel). 2021;11(5):768.
31.
TomazRFSantosDBCameyKComplex phase quantification methodology using electron backscatter diffraction (EBSD) on low manganese high temperature processed steel (HTP) microalloyed steel. J Mater Res Technol. 2019;8(2):2423–2431.
32.
HojoTKikuchiRWakiHEffect of strain rate on the hydrogen embrittlement property of ultra high-strength low alloy TRIP-aided steel. ISIJ Int. 2018;58(4):751–759.
33.
FrómetaDPararedaSLaraAIdentification of fracture toughness parameters to understand the fracture resistance of advanced high strength sheet steels. Eng Fract Mech. 2020;229:106949.
34.
HojoTSugimotoKIMukaiYEffects of aluminum on delayed fracture properties of ultra high strength low alloy TRIP-aided steels. ISIJ Int. 2008;48(6):824–829.
35.
RugglesTCluffSMilesMDuctility of advanced high-strength steel in the presence of a sheared edge. JOM. 2016;68(7):1839–1849.
