Multiphase TRIP-aided steels are generally characterised by a continuous yielding behaviour. The processing route involving a deformation step in the intercritical (ferrite + austenite) region showed an undesirable discontinuous yielding. This is attributed to the formation of fresh dislocations in the soft ferrite matrix that trap the diffusing carbon and form Cottrell atmospheres. The discontinuous yielding disappears when fresh mobile dislocations are introduced through transformation of the retained austenite to martensite.
SugimotoKMukherjeeM.TRIP aided and complex phase steels. In: RanaR, editors. Automotive steels. Woodhead Publishing; 2017. p. 217–257.
3.
SoleimaniMKalhorAMirzadehH.Transformation-induced plasticity (TRIP) in advanced steels: a review. Mater Sci Eng A. 2020;795:140023.
4.
BleckWGuoXMaY.The TRIP effect and its application in cold formable sheet steels. Steel Res Int. 2017;88(10):1700218.
5.
ChenS-CWangY-TLinY-CMicrostructure and mechanical behaviors of GPa-grade TRIP steels enabled by hot-rolling processes. Mater Sci Eng A. 2019;761:138005.
6.
PatelJRCohenM.Criterion for the action of applied stress in the martensitic transformation. Acta Metall. 1953;1(5):531–538.
BhadeshiaHKDH.Theory of transformations in steels. CRC Press; 2021.
9.
MukherjeeMSinghSBMohantyON.Deformation-induced transformation of retained austenite in transformation induced plasticity-aided steels: a thermodynamic model. Metall Mater Trans A. 2008;39(10):2319–2328.
10.
SugimotoK-iSrivastavaAK.Microstructure and mechanical properties of a TRIP-aided martensitic steel. Metall Microstruct Anal. 2015;4(5):344–354.
11.
ZhouYHojoTKoyamaMEffect of austempering treatment on the microstructure and mechanical properties of 0.4C–1.5Si–1.5Mn TRIP-aided bainitic ferrite steel. Mater Sci Eng A. 2021;819:141479.
12.
DongXXShenYFJiaN.Improving mechanical properties and retained-austenite stability of a medium carbon Q&P steel by adjusting phase ratio. Mater Sci Eng A. 2022;833:142580.
13.
CarpioMCalvoJGarcíaOHeat treatment design for a QP steel: effect of partitioning temperature. Metals. 2021;11(7):1136.
14.
RanjanRBeladiHHodgsonPDThe mechanical properties of low alloy TRIP-aided steel: the role of retained austenite. Metall Mater Trans A. 2021;52(10):4649–4663.
15.
RanjanRBeladiHSinghSBThermo-mechanical processing of TRIP-aided steels. Metall Mater Trans A. 2015;46(7):3232–3247.
16.
JacquesPJFurnémontQLaniFMultiscale mechanics of TRIP-assisted multiphase steels: I. Characterization and mechanical testing. Acta Mater. 2007;55(11):3681–3693.
17.
WangCDingHCaiMCharacterization of microstructures and tensile properties of TRIP-aided steels with different matrix microstructure. Mater Sci Eng A. 2014;610:65–75.
18.
FuBYangWYLuMYMicrostructure and mechanical properties of C–Mn–Al–Si hot-rolled TRIP steels with and without Nb based on dynamic transformation. Mater Sci Eng A. 2012;536:265–268.
ChiangJBoydJDPilkeyAK.Effect of microstructure on retained austenite stability and tensile behaviour in an aluminum-alloyed TRIP steel. Mater Sci Eng A. 2015;638:132–142.
21.
LiSZhuRKaramanIThermodynamic analysis of two-stage heat treatment in TRIP steels. Acta Mater. 2012;60(17):6120–6130.
22.
ParkHSHanJCLimNSNano-scale observation on the transformation behavior and mechanical stability of individual retained austenite in CMnSiAl TRIP steels. Mater Sci Eng A. 2015;627:262–269.
WarrenMR.An improved method for differentiating between continuous and discontinuous yielding. Scr Metall. 1974;8(1):65–70.
25.
HallEO.Yield point phenomena in metals and alloys. New York: Springer; 1970.
26.
CottrellAHBilbyBA.Dislocation theory of yielding and strain ageing of iron. Proc Phys Soc Lond A. 1949;62(1):49–62.
27.
NandaTSinghVSinghVThird generation of advanced high-strength steels: processing routes and properties. Proc Inst Mech Eng Part L: J Mater: Des Appl. 2016;233(2):209–238.
28.
HilditchTBde SouzaTHodgsonPDProperties and automotive applications of advanced high-strength steels (AHSS). In: ShomeM, editor. Welding and joining of advanced high strength steels (AHSS). Woodhead Publishing; 2015. p. 9–28.
29.
MohsenzadehMSMazinaniM.On the yield point phenomenon in low-carbon steels with ferrite-cementite microstructure. Mater Sci Eng A. 2016;673:193–203.
30.
SakakiTSugimotoKFukuzatoT.Role of internal stress for continuous yielding of dual-phase steels. Acta Metall1983;31(10):1737–1746.
31.
KellyGLBeladiHHodgsonPD.Ultrafine grained ferrite formed by interrupted hot torsion deformation of plain carbon steel. ISIJ Int. 2002;42(12):1585–1590.
32.
BeladiHKellyGLHodgsonPD.Ultrafine grained structure formation in steels using dynamic strain induced transformation processing. Int Mater Rev. 2007;52(1):14–28.
33.
GaoSShibataAChenMCorrelation between continuous/discontinuous yielding and Hall–Petchslope in high purity iron. Mater Trans2014;55(1):69–72.
