This study presents an accelerated life prediction of the special fluoro rubber under various ageing temperatures. It was predicted by evaluating the changes in physical properties under accelerated ageing time at 150°C, 175°C, and 200°C and the corresponding change in physical properties at 80°C. The present study shows the activation energy of 29,730 kcal mol−1 and the reaction constant of 23.673 from tensile strength and 12,227 kcal mol−1 and 6.044 from elongation. Comparing the predicted weight and volume change rate from tensile strength and those from elongation, respectively at 80°C, the predicted ones of tensile strength tended to be more alike the actual results.
CampionRP.Elastomer composites for engineering applications – spontaneous and other forms of bonding between components. Mater Sci Technol. 1989; 5(3):209–221.
2.
OkamotoM.Recent advances in polymer/layered silicate nanocomposites: an overview from science to technology. Mater Sci Technol. 2006; 22(7):756–779.
BrownRPForrestMJ.Long-term and accelerated ageing tests on rubbers. RAPRA Rev Rept. 2000; 10(2):5–10.
8.
BrownRP.Aging of rubber: accelerated heat aging test results. RAPRA Technology; 2001. p. 26–34.
9.
BrownRP.Practical guide to the assessment of the useful life of rubbers. RAPRA Technology; 2001. p. 14–22.
10.
XuSGaoQZhouCImproved thermal stability and heat-aging resistance of silicone rubber via incorporation of UiO-66-NH2. Mater Chem Phys. 2021; 274:125182.
11.
HeQXuZLiAStudy on hydrophobic properties of fluororubber prepared by template method under high temperature conditions. Collids Surf A Physiochem Eng Aspects. 2021; 612:125837.
12.
KangQLiAZhangXStudy on mechanical and tribological properties of cerium oxide/fluorine rubber composites. Materialstoday Commun. 2021; 28:102596.
13.
TadiniPThermal degradation analysis of innovative PEKK-based carbon composite for high-temperature aeronautical components. Aerosp Sci Technol. 2017; 65:106–116.
14.
YildirimHCOzupekS.Structure assessment of a solid propellant rocket motor: effect of aging and damage. Aerosp Sci Technol. 2011; 15:635–641.
15.
CiaralliSColettiMGabrielSB.Performance and lifetime testing of a pulsed plasma thruster for cubesat applications. Aerosp Sci Technol. 2015; 47:291–298.
16.
ParkJLeeBParkS. The study on the thermal and oil resistance rubber composite. KSPE Fall Conference; 2016.
17.
WiseJGillenKTCloughRL.An ultrasensitive technique for testing the Arrhenius extrapolation assumption foe thermally aged elastomers. Polym Degrad Stab. 1995; 49:403–418.
18.
KSM-6518. Physical test methods for vulcanized rubber. Korean Standards Association; 2006.
19.
KimDDoKParkHGas permeation study of fuel hose composed as inner material of FKM rubber. Elastomer. 2005; 40(2):83–92.
20.
Walt IJVDBruinsmaOSL.Depolymerization of clean unfilled PTFE waste in a continuous process. J Appl Polym Sci. 2006; 102:2752–2759.
21.
ChiparăMDChiparăMI.Effects of gamma irradiation on PTFE. Polym Degrad Stab. 1992; 37:67–71.
22.
BorbathTBorbathIZaharescuT.Thermal and radiation degradation effects on fluoroelastomer destined to gasket applications in nuclear power plants. J Therm Anal Calorim. 2022. https://doi.org/10.1007/s10973-022-11366-9.
23.
WangQ-LPeiJ-KLiGAccelerated aging behaviors and mechanism of fluoroelastomer in lubricating oil medium. Chinese J Polym Sci. 2020; 38:853–866.
24.
Life-time prediction of a FKM O-ring using intermittent compression stress relaxation (CSR) and time-temperature superposition (TTS) principle. Elastomers Compos. 2010; 45(4):263–271.
25.
XiXXiaY-Q.An investigation of thermal and tribological behavior of PTFE-based silicon composites filled with AIN and flake graphite particles. JAppl Polym Sci. 2017. DOI:10.1002/APP.45263.
26.
PlotaAMasekA.Lifetime prediction methods for degradable polymeric materials—a short review. Materials. 2020; 13:4507. DOI:10.3390/ma13204507.
27.
ChoiJNamSKimJ.A study on variation of properties of silicone rubber by swelling. Trans. KIEE. 2019; 68(9):1125.
