Creep behaviour of the AZ61–0.7Si–xBi cast magnesium alloys were studied by Vickers indentation testing under constant load of 5 N in the temperature range of 423–523 K. The results indicate that increasing Bi content improved the creep resistance at all test temperatures. This was caused by the higher volume fraction of the thermally stable Mg3Bi2 intermetallic particles, as the principal strengthening cause, which compensated the possible effects of the lower amount of the Mg2Si particles. According to the obtained stress exponents of about 6.7 and activation energies in the range of 84.6–88.1 kJ mol−1, dislocation pipe diffusion was suggested as the dominant creep mechanism.
LuoAA.Recent magnesium alloy development for elevated temperature application. Int Mater Rev. 2004; 49:13–30.
2.
Kabirian FMahmudi R.Effects of Zr additions on the microstructure and impression creep behavior of AZ91 magnesium alloy. Metall Mater Trans A. 2010; A41:3488–3498.
3.
KashefiNMahmudiR.The microstructure and impression creep behavior of cast AZ80 magnesium alloy with yttrium additions. Mater Des. 2012; 39:200–210.
4.
AlizadehRMahmudiR.Microstructural characterization and high-temperature mechanical behavior of cast Mg–4Zn–xSi alloys. Adv Eng Mater. 2014; 16:1160–1166.
5.
KimJJKimDHShinKSModification of Mg2Si morphology in squeeze cast Mg–Al–Zn–Si alloys by Ca or P addition. Scr Mater. 1999; 41:333–340.
6.
AlizadehRMahmudiR.Effects of Sb addition on the modification of Mg2Si particles and high-temperature mechanical properties of cast Mg–4Zn–2Si alloy. J Alloys Compd. 2011; 509:9195–9199.
7.
GuangyinYYangshanSWenjiangD.Effects of bismuth and antimony additions on the microstructure and mechanical properties of AZ91 magnesium alloy. Mater Sci Eng A. 2001; 308:38–44.
8.
GuoEJMaBXWangLP.Modification of Mg2Si morphology in Mg–Si alloys with Bi. J Mater Proc Technol. 2008; 206:161–166.
9.
KeyvaniMMahmudiRNayyeriG.Microstructure and impression creep characteristics of cast Mg–Sn–xBi magnesium alloys. Metall Mater Trans A. 2011; 42A:1990–2003.
10.
MajhiJMondalAK.Microstructure and impression creep characteristics of squeeze-cast AZ91 magnesium alloy containing Ca and/or Bi. Mater Sci Eng A. 2019; 744:691–703.
11.
AshrafizadehSMMahmudiRGeranmayehAR.A comparative study on the effects of Gd, Y and La rare-earth elements on the microstructure and creep behavior of AZ81 Mg alloy. Mater Sci Eng A. 2020; 790:139712.
12.
NamiBRazaviHMirdamadiSEffect of Ca and rare earth elements on impression creep properties of AZ91 magnesium alloy. Metall Mater Trans A. 2010; 41A:1973–1982.
13.
SrinivasanASwaminathanJPillaiUTSEffect of combined addition of Si and Sb on the microstructure and creep properties of AZ91 magnesium alloy. Mater Sci Eng A. 2008; 485:86–91.
14.
FengXXuegangMYangshanS.Microstructures and mechanical properties of AZ91 alloy with combined additions of Ca and Si. J Mater Sci. 2006; 41:4725–4731.
15.
AmbergerDEisenlohrPGökenM.Microstructural evolution during creep of Ca-containing AZ91. Mater Sci Eng A. 2009; 510–511:398–402.
16.
LiJCM.Impression creep and other localized tests. Mater Sci Eng A. 2002; 322:23–42.
17.
LiuHChenYTangYTensile and indentation creep behavior of Mg–5% Sn and Mg–5% Sn–2% Di alloys. Mater Sci Eng A. 2007; 464:124–128.
18.
MahmudiRAnsarySEsfandyarpourMJ.Indentation creep of the wrought AZ31 magnesium alloy. J Mater Sci. 2013; 47:7181–7188.
19.
GeranmayehARMahmudiR.Indentation creep of a cast Mg–6Al–1Zn–0.7Si alloy. Mater Sci Eng A. 2014; 614:311–318.
20.
MahmudiRShalbafiMKaramiMEffect of Li content on the indentation creep characteristics of cast Mg–Li–Zn alloys. Mater Des. 2015; 75:184–190.
21.
NautiyalPJainJAgarwalA.Influence of loading path and precipitates on indentation creep behavior of wrought Mg–6 wt% Al–1 wt% Zn magnesium alloy. Mater Sci Eng A. 2016; 650:183–189.
22.
RouminaRRaeesiniaBMahmudiR.Investigation of stress exponent in the power-law creep of Pb-Sb alloys. Mater Sci Eng A. 2004; 382:15–22.
23.
TaniJIKidoH.Thermoelectric properties of Bi-doped Mg2Si semiconductors. Physica B. 2005; 364:218–224.
24.
LiYTangYZhaoWEffects of Bi addition on solidification behavior of Mg-Al-Zn casting alloys using experiments and CALPHAD calculations. J Mater Sci. 2020; 55:7039–7051.
25.
KabirianFMahmudiR.Effects of rare earth element additions on the impression creep behavior of AZ91 magnesium alloy. Metall Mater Trans A. 2009; 40A:2190–2201.
26.
NayyeriGMahmudiR.Effects of Sb additions on the microstructure and impression creep behavior of a cast Mg–5Sn alloy. Mater Sci Eng A. 2010; 527:669–676.
27.
MukherjeeAKBirdJEDornJE.Experimental correlations for high-temperature creep. Trans ASM. 1969; 62:155–179.
28.
IshikawaKWatanabeHMukaiT.High strain rate deformation behavior of an AZ91 magnesium alloy at elevated temperatures. Mater Lett. 2005; 59:1511–1515.
29.
SargentPMAshbyMF.Indentation creep. Mater Sci Technol. 1992; 8:594–601.
30.
KabirianFMahmudiR.Impression creep behavior of a cast AZ91 magnesium alloy. Metall Mater Trans A. 2009; 40A:116–127.
31.
MahmudiRMoeendarbariS.Effects of Sn additions on the microstructure and impression creep behavior of AZ91 magnesium alloy. Mater Sci Eng A. 2013; 566:30–39.
32.
GeranmayehARMahmudiR.Compressive and impression creep behavior of a cast Mg–Al–Zn–Si alloy. Mater Chem Phys. 2013; 139:79–86.
33.
MazraeshahiEMNamiBMiresmaeiliSM.Investigation on the impression creep properties of a cast Mg–6Al–1Zn magnesium alloy. Mater Des. 2013; 51:427–437.
34.
PoirierJP.Creep of crystals, high temperature deformation processes in metals, ceramics and minerals. New York (NY): Cambridge University Press; 1985.
35.
LangdonTJ.Identifying creep mechanisms at low stresses. Mater Sci Eng A. 2000; 283:266–273.
36.
MathewMDYangHMovvaSCreep deformation characteristics of tin and tin-based electronic solder alloys. Metall Mater Trans A. 2005; 36A:99–105.
37.
ReinikainenTKivilahtiJ.Deformation behavior of dilute Sn–Bi (0.5–6 at. Pct) solid solutions. Metall Mater Trans A. 1999; 30A:123–132.
38.
TaborD.The hardness of metals. New York: Oxford University Press; 1951.p. 74.
