In this work, CoCrFeNi and CoCrCuFeNi multi-principal element alloys were welded using an autogenous gas tungsten arc welding process. Tensile testing, microhardness, X-ray diffraction, scanning electron microscopy, electron back scattered diffraction techniques were used to study the mechanical properties, crystal structure and microstructures of the base metals (BMs) and welds. It was found that CoCrFeNi alloy was easily weldable while CoCrCuFeNi alloy produced transverse cracks. Only 13.5% decrease in ultimate tensile strength as compared to its BM was observed in CoCrFeNi alloy. Whereas poor tensile properties were observed in CoCrCuFeNi alloy due to Cu segregation and micro-cracks. Fractography analysis of the BM and weld specimen shows ductile failure in both the alloys.
WangBHuSJSunLIntelligent welding system technologies: state-of-the-art review and perspectives. J Manuf Syst. 2020; 56:373–391.
2.
YuHZhangJFangWA brief review of metastable high-entropy alloys with transformation-induced plasticity. Mater Sci Technol. 2020; 36:1893–1902.
3.
CantorB.Multicomponent high-entropy Cantor alloys. Prog Mater Sci. 2021; 120:100754.
4.
SathiyamoorthiPKimHS.High-entropy alloys with heterogeneous microstructure: processing and mechanical properties. Prog Mater Sci. 2020; 123:100709.
5.
LiuNDingWWangXJPhases, microstructures and properties of multi-component FeCoNi-based alloys. Mater Sci Technol. 2020; 36:654–660.
6.
ArifZUKhalidMYRehmanEUA review on laser cladding of high-entropy alloys, their recent trends and potential applications. J Manuf Process. 2021; 68:225–273.
7.
AbhayaSRajaramanRKalavathiSEffect of dose and post irradiation annealing in Ni implanted high entropy alloy FeCrCoNi using slow positron beam. J Alloys Compd. 2016; 669:117–122.
8.
HuoWFangFZhouHRemarkable strength of CoCrFeNi high-entropy alloy wires at cryogenic and elevated temperatures. Scr Mater. 2017; 141:125–128.
9.
VermaATaratePAbhyankarACHigh temperature wear in CoCrFeNiCux high entropy alloys: The role of Cu. Scr Mater. 2019; 161:28–31.
10.
NascimentoCBDonatusURíosCTElectronic properties of the passive films formed on CoCrFeNi and CoCrFeNiAl high entropy alloys in sodium chloride solution. J Mater Res Technol. 2020; 9(6):13879–13892.
11.
GaoJJinYFanYFabricating antibacterial CoCrCuFeNi high-entropy alloy via selective laser melting and in-situ alloying. J Mater Sci Technol. 2022; 102:159–165.
12.
LiJMengXWanLWelding of high entropy alloys: progresses, challenges and perspectives. J Manuf Process. 2021; 68:293–331.
13.
LopesJGOliveiraJP.A short review on welding and joining of high entropy alloys. Metals (Basel). 2020; 10(2):212.
14.
NamHParkCMoonJLaser weldability of cast and rolled high-entropy alloys for cryogenic applications. Mater Sci Eng A. 2019; 742:224–230.
15.
WuZDavidSAFengZWeldability of a high entropy CrMnFeCoNi alloy. Scr Mater. 2016; 124:81–85.
16.
OliveiraJPShenJZengZDissimilar laser welding of a CoCrFeMnNi high entropy alloy to 316 stainless steel. Scr Mater. 2022; 206:114219.
17.
OliveiraJPCuradoTMZengZGas tungsten arc welding of as-rolled CrMnFeCoNi high entropy alloy. Mater Des. 2020; 189:108505.
18.
SokkalingamRMishraSCheethiralaSREnhanced relative slip distance in gas-tungsten-Arc-welded Al0.5CoCrFeNi high-entropy alloy. Metall Mater Trans A. 2017; 48:3630–3634.
19.
MartinACOliveiraJPFinkC.Elemental effects on weld cracking susceptibility in AlxCoCrCuyFeNi high-entropy alloy. Metall Mater Trans A Phys Metall Mater Sci. 2020; 51:778–787.
20.
OliveiraJPCrispimBZengZMicrostructure and mechanical properties of gas tungsten arc welded Cu-Al-Mn shape memory alloy rods. J Mater Process Technol. 2019; 271:93–100.
21.
KolhatkarAKarthikVChaitanyaGDevelopment and validation of a miniature tensile specimen for determination of mechanical properties. J Test Eval. 2019; 47(5):3417–3431.
22.
VermaANatuHBalasundarIEffect of copper on microstructural evolution and mechanical properties of laser-welded CoCrFeNi high entropy alloy. Sci Technol Weld Join. 2022; 27(3):197–203.
23.
WuPHLiuNZhouPJMicrostructures and liquid phase separation in multicomponent CoCrCuFeNi high entropy alloys. Mater Sci Technol. 2016; 32:576–580.
24.
ThangarajuSBouzyTEHazotteA.Phase stability of a mechanically alloyed CoCrCuFeNi high entropy alloy. Adv Eng Mater. 2017; 19:1700095.
25.
ZhengHChenRQinGMicrostructure evolution, Cu segregation and tensile properties of CoCrFeNiCu high entropy alloy during directional solidification. J Mater Sci Technol. 2020; 38:19–27.
26.
HassanMAGhayadIMMohamedASAImprovement ductility and corrosion resistance of CoCrFeNi and AlCoCrFeNi HEAs by electroless copper technique. J Mater Res Technol. 2021; 13:463–485.
27.
VaidyaMPradeepKGMurtyBSBulk tracer diffusion in CoCrFeNi and CoCrFeMnNi high entropy alloys. Acta Mater. 2018; 146:211–224.
28.
GangireddySGwalaniBSoniVContrasting mechanical behavior in precipitation hardenable AlXCoCrFeNi high entropy alloy microstructures: single phase FCC vs. dual phase FCC-BCC. Mater Sci Eng A. 2019; 739:158–166.
29.
El-danafEKalidindiSRDohertyRD.Influence of grain size and stacking-fault energy on deformation twinning in Fcc metals. Metall Mater Trans A. 1999; 30:1223–1233.
30.
HassanMAYehiaHMMohamedASAEffect of copper addition on the AlCoCrFeNi high entropy alloys properties via the electroless plating and powder metallurgy technique. Crystals (Basel). 2021; 11(5):1–19.
31.
ZhuZGNgFLQiaoJWInterplay between microstructure and deformation behavior of a laser welded CoCrFeNi high entropy alloy. Mater Res Express. 2019; 6:046514.
32.
LiWWangGWuSCreep, fatigue, and fracture behavior of high-entropy alloys. J Mater Res. 2018; 33(19):3011–3034.
33.
KroonMFaleskogJ.Micromechanics of cleavage fracture initiation in ferritic steels by carbide cracking. J Mech Phys Solids. 2005; 53:171–196.
34.
LiWLiawPKGaoY.Fracture resistance of high entropy alloys: a review. Intermetallics. 2018; 99:69–83.
