Present study deals with the comparative wear and corrosion behaviour of electrodeposited Ni-W-Ti3C2Tx composite coatings. The composite coatings were prepared by direct current electrodeposition method in bath with different amounts of Ti3C2Tx. Reciprocating friction was used to analyse the wear behaviour of the coating. The corrosion resistance of all coatings was examined by potential polarisation and electrochemical impedance spectroscopy. The results show that the wear rate and friction coefficient are the lowest for Ni-W-20Ti3C2Tx composite coating among all the coatings, which is attributed to the lubrication effect of Ti3C2Tx. Moreover, the Ti3C2Tx can effectively improve the corrosion resistance of Ni-W alloy coating, and the optimum addition of 20 mg/L is reached, which is determined by Ni (111) texture and surface quality.
ZhangHYDaiRQZhuSBimetallic nitride modified separator constructs internal electric field for high-performance lithium-sulfur battery. Chem Eng J. 2022; 429:132454.
2.
XuSGongSQJiangHZ-scheme heterojunction through interface engineering for broad spectrum photocatalytic water splitting. Appl Catal B. 2020; 267:118661.
3.
ZhengSZhangHYFanJCIn situ construction of aramid nanofiber membrane on Li anode as artificial SEI layer achieving ultra-high stability. Small. 2021; 17:2102347.
4.
WasekarNPHebalkarNJyothirmayiAInfluence of pulse parameters on the mechanical properties and electrochemical corrosion behavior of electrodeposited Ni-W alloy coatings with high tungsten content. Corros Sci. 2019; 165:108409.
5.
WasekarNPSundararajanG.Sliding wear behavior of electrodeposited Ni–W alloy and hard chrome coatings. Wear. 2015; 342-343:340–348.
6.
SalehikahrizsangiPRaeissiKKarimzadehFHighly hydrophobic Ni-W electrodeposited film with hierarchical structure. Surf Coat Technol. 2018; 344:626–635.
7.
ArmstrongDEJHaseebASMARobertsSGNanoindentation and micro-mechanical fracture toughness of electrodeposited nanocrystalline Ni-W alloy films. Thin Solid Films. 2012; 520:4369–4372.
8.
Beltowska-LehmanEIndykaPBigosA.Electrodeposition of nanocrystalline Ni-W coatings strengthened by ultrafine alumina particles. Surf Coat Technol. 2012; 211:62–66.
9.
ChenZLianYYLiuXRecent research and development of thick CVD tungsten coatings for fusion application. Tungsten. 2020; 2:83–93.
10.
WangHZhangHBWangJD.Ni-SiC composite coatings with improved wear and corrosion resistance synthesized via ultrasonic electrodeposition. Ceram Int. 2021; 47(7):9437–9446.
11.
AlizadehMSafaeiH.Characterization of Ni-Cu matrix, Al2O3 reinforced nano-composite coatings prepared by electrodeposition. Appl Surf Sci.2018; 456:195–203.
12.
XueZMLeiWNWangYQEffect of pulse duty cycle on mechanical properties and microstructure of nickel-graphene composite coating produced by pulse electrodeposition under supercritical carbon dioxide. Surf Coat Technol. 2017; 325:417–428.
13.
ZhouMPMaiYJLingHJElectrodeposition of CNTs/copper composite coatings with enhanced tribological performance from a low concentration CNTs colloidal solution. Mater Res Bull. 2017; 97:537–543.
14.
McManusJBIlhanCBalsamoBSynthesis of tungsten ditelluride thin films and highly crystalline nanobelts from pre-deposited reactants. Tungsten. 2020; 2:321–334.
15.
WasekarNPBathiniLRamakrishnaL.Pulsed electrodeposition, mechanical properties and wear mechanism in Ni-W/SiC nanocomposite coatings used for automotive applications. Appl Surf Sci. 2020; 527:146896.
16.
ZhangXHLiXXLiuWJPreparation and tribological behavior of electrodeposited Ni-W-GO composite coatings. Rare Met. 2019; 38:695–703.
17.
AllahyarzadehMHAliofkhazraeiMSabourARElectrodeposition of Ni-W-Al2O3 nanocomposite coating with functionally graded microstructure. J Alloy Compd. 2016; 666:217–226.
18.
KumarKAKalaignanGPMuralidharanVS.Direct and pulse current electrodeposition of Ni-W-TiO2 nanocomposite coatings. Ceram Int. 2013; 39:2827–2834.
19.
NaguibMKurtogluMPresserV.Two-dimensional nanocrystals produced by exfoliation of Ti3AlC2. Adv Mater. 2011; 23:4248–4253.
20.
LiZYWangLBSunDDSynthesis and thermal stability of two-dimensional carbide MXene Ti3C2. Mater Sci Eng B. 2015; 191:33–40.
21.
GhidiuMNaguibMShiC.Synthesis and characterization of two-dimensional Nb4C3 (MXene). Chem Commun. 2014; 50:9517–9520.
22.
HalimJKotaSLukatskayaMRSynthesis and characterization of 2D molybdenum carbide (MXene). Adv Funct Mater. 2016; 26:3118–3127.
23.
UrbankowskiPAnasoriBMakaryanT.Synthesis of two-dimensional titanium nitride Ti4N3(MXene). Nanoscale. 2016; 8:11385–11391.
24.
ZhanDAshtonMOstadhosseinA.Computational study of low interlayer friction in Tin+1Cn (n = 1, 2, and 3) MXene. ACS Appl Mater Interfaces. 2017; 9:34467–34479.
25.
KurtogluMNaguibMGogotsiY.First principles study of two-dimensional early transition metal carbides. MRS Commun. 2012; 1:1–5.
26.
WangKZhouYFXuWTFabrication and thermal stability of two-dimensional carbide Ti3C2 nanosheets. Ceram Int. 2016; 42:8419–8424.
27.
NaguibMMashtalirOCarleJ.Two-dimensional transition metal carbides. ACS Nano. 2012; 6:1322–1331.
28.
NaguibMKurtogluMPresserV.Two-dimensional nanocrystals produced by exfoliation of Ti3AlC2. Adv Mater. 2011; 23:4248–4253.
29.
SheinIIvanovskiiA.Graphene-like titanium carbides and nitrides Tin+1Cn, Ti n+1Nn (n = 1, 2, and 3) from de-intercalated MAX phases: firstprinciples probing of their structural, electronic properties and relative stability. Comput Mater Sci. 2012; 65:104–114.
30.
KhazaeiMAraiMSasakiT.Novel electronic and magnetic properties of two-dimensional transition metal carbides and nitrides. Adv Funct Mater. 2013; 27:2185–2192.
31.
LingZRenCEZhaoMQ.Flexible and conductive MXene films and nanocomposites with high capacitance. Proc Natl Acad Sci. 2014; 111:16676–16681.
32.
WuXLHaoLZhangJKPolymer-Ti3C2Tx composite membranes to overcome the trade-off in solvent resistant nanofiltration for alcohol-based system. J Membr Sci. 2016; 515:175–188.
33.
ZhangHWangLBChenQPreparation, mechanical and anti-friction performance of MXene/polymer composites. Mater Des. 2016; 92:682–689.
34.
WangJSchuetzenduebePQiuY.Tailoring metal film texture by use of high atomic mobility at metal-semiconductor interfaces. Appl Surf Sci. 2018; 475:117–123.
35.
CaoHJFangMXJiaWHRemarkable improvement of corrosion resistance of silane composite coating with Ti3C2Tx MXene on copper. Compos Part B. 2022; 228:109427.
36.
SinghDKSinghVB.Electrodeposition and characterization of Ni-TiC composite using N-methylformamide bath. Mater Sci Eng: A. 2012; 532:493–499.
37.
NieYHuangJMaSMXene-hybridized silane films for metal anticorrosion and antibacterial applications. Appl Surf Sci. 2020; 527:146915.
38.
ArchardJF.Contact and rubbing of flat surfaces. J Appl Phys. 1953; 24:981–988.
39.
YeYWChenHZouYStudy on self-healing and corrosion resistance behaviors of functionalized carbon dot-intercalated graphene-based waterborne epoxy coating. J Mater Sci Technol. 2021; 67:226–236.
40.
YeYWLiuZLiuWSuperhydrophobic oligoaniline-containing electroactive silica coating as pre-process coating for corrosion protection of carbon steel. Chem Eng J. 2018; 348:940–951.
41.
WangQJZhengMSZhuJW.Semi-conductive properties of passive films formed on copper in chromate solutions. Thin Solid Films. 2009; 517:1995–1999.
42.
PengXYanJZhouY.Effect of grain refinement on the resistance of 304 stainless steel to breakaway oxidation in wet air. Acta Mater. 2005; 53:5079–5088.
43.
LuYLuoSRenZCorrosion mechanism of Ni deposits on magnets by pulse current electro-deposition. Surf Coat Technol. 2021; 409(11):126833.
44.
ZhangZJiangCLiaoZEffect of electrodeposition parameters on the evolution of crystallographic texture and internal stress of Ni/ZrC composite coatings. Mater Today Commun. 2021; 27:102403.
