The directional solidification of Co–Sn alloys at 300 K/cm was performed systematically with particular attention to the uncommon ‘seaweed’ morphology observed in this system. As withdrawal velocity increased, the quenched solid/liquid interface of Co-20 at.-% Sn hypoeutectic transformed from a planar of α-Co/β-Co3Sn2 lamellar eutectic to dendritic α-Co + eutectic, and the planar interface of Co-24 at.-% Sn eutectic destabilised to cellular. As for Co-30 at.-% Sn hypereutectic, the planar interface transited to dendritic β-Co3Sn2 + eutectic and then to seaweed β-Co3Sn2 + eutectic. The increase of withdrawal velocity results in primary α-Co or β-Co3Sn2 phase growing ahead of the coupled eutectic, and the leading distance is gradually increased with withdrawal velocity. The spacing of the two tips of β-Co3Sn2 seaweed in the alloys followed a power law, , and the tip splitting frequency versus growth velocity as the function of .
LiXDingRWenDMicrostructural evolution of a nickel-base single-crystal superalloy during high-temperature homogenisation. Mater Sci Technol. 2020; 36:1936–1942.
2.
LiJFJieWQZhaoSStructural evidence for the transition from coupled to decoupled growth in the solidification of undercooled Ni-Sn eutectic melt. Metall Mater Trans A. 2007; 38:1806–1816.
3.
LiuLJWeiXXFerryMInvestigation of the origin of anomalous eutectic formation by remelting thin-gauge samples of an Ag-Cu eutectic alloy. Scr Mater. 2020; 174:72–76.
4.
LiYHongLHanB.Microstructure and volume shrinkage during directional solidification of peritectic steel. Mater Sci Technol. 2021; 37:395–404.
5.
MullisAMDragnevskiKICochraneRF.The transition from the dendritic to the seaweed growth morphology during the solidification of deeply undercooled metallic melts. Mater Sci Eng A. 2004; 375–377:157–162.
6.
CastleEGMullisAMCochraneRF.Evidence for an extensive, undercooling mediated transition in growth orientation, and novel dendritic seaweed microstructures in Cu–8.9wt.% Ni. Acta Mater. 2014; 66:378–387.
7.
HaqueNMullisAM.Existence of seaweed structures in rapidly solidified Ni3Ge intermetallic. J Alloys Compd. 2019; 801:640–644.
8.
IhleTMüller-KrumbhaarH.Fractal and compact growth morphologies in phase transitions with diffusion transport. Phys Rev E. 1994; 49:2972–2991.
9.
BrenerEMuller-KrumbhaarHTemkinD.Structure formation and the morphology diagram of possible structures in two-dimensional diffusional growth. Phys Rev E. 1996; 52:2714–2722.
10.
ProvatasNWangQHaatajaMSeaweed to dendrite transition in directional solidification. Phys Rev Lett. 2003; 91:155502.
11.
AkamatsuSFaivreG.Anisotropy driven dynamics of cellular fronts in directional solidification in thin samples. Phys Rev E. 1998; 58:3302–3315.
12.
AkamatsuSFaivreGIhleT.Symmetry-broken double fingers and seaweed patterns in thin-film directional solidification of a nonfaceted cubic crystal. Phys Rev E. 1995; 51:4751–4773.
13.
WangYMLiSMLiuZPProbing the degenerate pattern growth of {100}<011 > orientation in a directionally solidified Al-4.5 wt% Cu alloy. J Mater Sci Technol. 2019; 35:1309–1314.
14.
WangYMLiSMYangBNon-axially oriented dendritic microstructures and their mechanical characteristics of single-crystal Al-4.5%Cu alloy. Mater Sci Eng A. 2020; 771:138665.
15.
PocheauADeschampsJGeorgelinM.Dendrite growth directions and morphology in the directional solidification of anisotropic materials. JOM. 2007; 59:71–76.
16.
UtterBRagnarssonRBodenschatzE.Alternating tip splitting in directional solidification. Phys Rev Lett. 2001; 86:4604–4607.
17.
XingHJiMYDongXLGrowth competition between columnar dendrite and degenerate seaweed during directional solidification of alloys: insights from multi-phase field simulations. Mater Des. 2020; 185:108250.
18.
AmoorezaeiMGurevichSProvatasN.Orientation selection in solidification patterning. Acta Mater. 2012; 60:657–663.
19.
WangYBJiaSSWeiMGCoupling in situ synchrotron X-ray radiography and phase-field simulation to study the effect of low cooling rates on dendrite morphology during directional solidification in Mg-Gd alloys. J Alloys Compd. 2020; 815:152385.
20.
XingHDongXLWuHJDegenerate seaweed to tilted dendrite transition and their growth dynamics in directional solidification of non-axially oriented crystals: a phase field study. Sci Rep. 2016; 6:26625.
21.
CastleEGMullisAMCochraneRF.Mechanism selection for spontaneous grain refinement in undercooled metallic melts. Acta Mater. 2014; 77:76–84.
22.
ZhangJBWangHFZhangFGrowth kinetics and grain refinement mechanisms in an undercooled melt of a CoSi intermetallic compound. J Alloys Compd. 2019; 781:13–25.
23.
LiuLLiJFZhouYH.Anomalous eutectic formation in the solidification of undercooled Co-Sn alloys. J Cryst Growth. 2012; 358:20–28.
24.
LiuLLiJFZhouYH.Solidification interface morphology pattern in the undercooled Co-24.0 at.% Sn eutectic melt. Acta Mater. 2011; 59:5558–5567.
25.
MaXLiuL.Solidification microstructures of the undercooled Co-24 at.% Sn eutectic alloy containing 0.5 at.% Mn. Mater Des. 2015; 83:138–143.
26.
KangJLXuWQWeiXXEffect of Nb on the growth behavior of Co3Sn2 phase in undercooled Co-Sn melts. Metall Mater Trans A. 2016; 47:6187–6196.
, and the tip splitting frequency versus growth velocity as the function of 
.