The effect of Y and Si additions on the microstructure and stress corrosion cracking (SCC) of the high Zn-containing 7056 aluminium alloy has been investigated. The morphology and composition of dispersions were analysed by transmission electron microscope equipped with super-X energy disperse spectroscopy. The SCC resistance was measured by a double-cantilever beam experiment. Results indicated that the SCC resistance was significantly improved by the mixed Y and Si additions, which can mainly be attributed to the reduction in the recrystallisation fraction and the increase in the sub-grain boundaries fraction caused by the high coherent (Al,Si)3(Zr,Y) dispersions and another important reason was the formation of the Y–Si-containing oxide film with the higher compactness and electrochemical impedance.
DursunTSoutisC.Recent developments in advanced aircraft aluminium alloys. Mater Des. 2014; 56:862–871.
2.
EivaniARAhmedHZhouJAn experimental and theoretical investigation of the formation of Zr-containing dispersions in Al–4.5Zn–1Mg aluminium alloy. Mater Sci Eng A. 2010; 527:2418–2430.
3.
LiWBPanQLXiaoYPMicrostructural evolution of ultra-high strength Al–Zn–Cu–Mg–Zr alloy containing Sc during homogenization. Trans Nonferr Metal Soc. 2011; 21:2127–2133.
4.
DengYYinZMCongFG.Intermetallic phase evolution of 7050 aluminium alloy during homogenization. Intermetallics. 2012; 26:114–121.
5.
KnightSPPohlKHolroydNJHSome effects of alloy composition on stress corrosion cracking in Al–Zn–Mg–Cu alloys. Corros Sci. 2015; 98:50–62.
6.
SunXYZhangBLinHQAtom probe tomographic study of elemental segregation at grain boundaries for a peak-aged Al–Zn–Mg alloy. Corros Sci. 2014; 79:1–4.
7.
KnightSPBirbilisNMuddleBCCorrelations between intergranular stress corrosion cracking, grain boundary microchemistry, and grain-boundary electrochemistry for Al–Zn–Mg–Cu alloys. Corros Sci. 2010; 52:4073–4080.
8.
HolroydNJH.Environment-induced cracking of high-strength aluminium alloys. In: GangloffRP, IvesMB, editor. Proceedings of environment-induced cracking of metals 1988. Houston: NACE; 1990. p. 311–345.
9.
BirbilisNBuchheitRG.Electrochemical characteristics of intermetallic phases in aluminium alloys an experimental survey and discussion. J Electrochem Soc. 2005; 152:B140–B151.
10.
HuangLPChenKHLiSInfluence of high-temperature pre-precipitation on local corrosion behaviors of Al–Zn–Mg alloy. Scr Mater. 2007; 56: 305–308.
11.
HolroydNJHScamansGM.Crack propagation during sustained-load cracking of Al–Zn–Mg–Cu aluminium alloys exposed to moist air or distilled water. Metall Mater Trans A. 2011; 42:3979–3998.
12.
CinaBM. Reducing the susceptibility of alloys, particularly aluminium alloys, to stress corrosion cracking, US Patent 3856584, 24 December 1974.
13.
PengGChenKChenSInfluence of repetitious-RRA treatment on the strength and SCC resistance of Al–Zn–Mg–Cu alloy. Mater Sci Eng A. 2011; 528:4014–4018.
14.
JiangJTXiaoWQYangLAgeing behavior and stress corrosion cracking resistance of a non-isothermally aged Al–Zn–Mg–Cu alloy. Mater Sci Eng A. 2014; 605:167–175.
15.
JiangDLiuYLiangSThe effects of non-isothermal aging on the strength and corrosion behavior of AlZnMgCu alloy. J Alloy Compd. 2016; 681:57–65.
16.
HolroydNJHScamansGM.Stress corrosion cracking in Al–Zn–Mg–Cu aluminium alloys in saline environments. Metall Mater Trans A. 2013; 44:1230–1253.
17.
LinJCLiaoHLJehngWDEffect of heat treatments on the tensile strength and SCC-resistance of AA7050 in an alkaline saline solution. Corros Sci. 2006; 48:3139–3156.
18.
YangJGOuBL.Influence of microstructure on the mechanical properties and stress corrosion susceptibility of 7050 Al-alloy. Scand J Metall. 2001; 30:158–167.
19.
OuBLYangJGWeiMY.Effect of homogenization and aging treatment on mechanical properties and stress-corrosion cracking of 7050 alloys. Metall Mater Trans A. 2007; 38:1760–1773.
20.
YuanDChenKChenSEnhancing stress corrosion cracking resistance of low Cu-containing Al–Zn–Mg–Cu alloys by slow quench rate. Mater Des. 2019; 164:107558.
21.
StaleyJT. Durham, Method and process of non-isothermal aging for aluminium alloys, US Patent 0267113, 22 November 2007.
22.
LiuYJiangDMLiWJ.The effect of multistage ageing on microstructure and mechanical properties of 7050 alloy. J Alloy Compd. 2016; 671:408–418.
23.
FengDZhangXMLiuSDNon-isothermal “retrogression and re-ageing” treatment schedule for AA7055 thick plate. Mater Des. 2014; 60:208–217.
24.
LiuYJiangDLiBEffect of cooling aging on microstructure and mechanical properties of an Al–Zn–Mg–Cu alloy. Mater Des. 2014; 57:79–86.
25.
LiuYJiangDLiBHeating aging behavior of Al–8.35Zn–2.5Mg–2.25Cu alloy. Mater Des. 2014; 60:116–124.
26.
PengXGuoQLiangXMechanical properties, corrosion behavior and microstructures of a non-isothermal ageing treated Al–Zn–Mg–Cu alloy. Mater Sci Eng A. 2017; 688:146–154.
27.
WuYLFroesFHLiCGMicroalloying of Sc, Ni, and Ce in advanced Al–Zn–Mg–Cu alloy. Metall Mater Trans A. 1999; 30:1017–1024.
28.
GaoTZhangYLiuX.Influence of trace Ti on the microstructure, age hardening behavior and mechanical properties of an Al–Zn–Mg–Cu–Zr alloy. Mater Sci Eng A. 2014; 598:293–298.
29.
DavydovVGRostovaTDZakharovVVScientific principles of making an alloying addition of scandium to aluminium alloys. Mater Sci Eng A. 2000; 280:30–36.
30.
FangHCChaoHChenKH.Effect of Zr, Er and Cr additions on microstructures and properties of Al–Zn–Mg–Cu alloys. Mater Sci Eng A. 2014; 610:10–16.
31.
MonachonCKrugMESeidmanDNChemistry and structure of core/double-shell nanoscale precipitates in Al–6.5Li–0.07Sc–0.02Yb (at.%). Acta Mater. 2011; 59:3398–3409.
32.
PengGChenKFangHEffect of Cr and Yb additions on microstructure and properties of low copper Al–Zn–Mg–Cu–Zr alloy. Mater Des. 2012; 36:279–283.
33.
FangHCLuoFHChenKH.Effect of intermetallic phases and recrystallization on the corrosion and fracture behavior of an Al–Zn–Mg–Cu–Zr–Yb–Cr alloy. Mater Sci Eng A. 2017; 684:480–490.
34.
LiBWangHWJieJCEffects of yttrium and heat treatment on the microstructure and tensile properties of Al–7.5Si–0.5Mg alloy. Mater Des. 2011; 32:1617–1622.
35.
DingWWZhaoXYChenTLEffect of rare earth Y and Al–Ti–B master alloy on the microstructure and mechanical properties of 6063 aluminum alloy. J Alloy Compd. 2020; 830:154685.
36.
ZhangXGMeiFQZhangHYEffects of Gd and Y additions on microstructure and properties of Al–Zn–Mg–Cu–Zr alloy. Mater Sci Eng A. 2012; 552:230–235.
37.
YanPZhangZZhouCEnhancement of corrosion resistance of a high Zn–yttrium aluminium alloy. J Alloy Compd. 2020; 817:152774.
38.
NakamuraFHirosawaSSatoT.Effects of Si and Ge addition on the Al3Zr precipitates in an Al–0.6 mass.%Zr alloy. In: NieJF, MortonAJ, MuddleBC, editor. Proceedings of the 9th international conference on aluminium alloys 2004. Institute of Materials Engineering Australasia Ltd; 2004. p. 582–587.
39.
Booth-MorrisonCMaoZDiazMRole of silicon in accelerating the nucleation of Al3(Sc,Zr) precipitates in dilute Al–Sc–Zr alloys. Acta Mater. 2012; 60:4740–4752.
40.
FangLZhangZFangHCEffects of Si additions on the precipitation evolution of dilute Al–Zr–Yb alloys. Mater Charact. 2019; 152:130–133.
41.
VoNQSeidmanDNDunandDC.Effect of Si micro-addition on creep resistance of a dilute Al–Sc–Zr–Er alloy. Mater Sci Eng A. 2018; 734:27–33.
42.
VoNQDunandDCSeidmanDN.Role of silicon in the precipitation kinetics of dilute Al–Sc–Er–Zr alloys. Mater Sci Eng A. 2016; 677:485–495.
43.
SheHChuWShuDEffects of silicon content on microstructure and stress corrosion cracking resistance of 7050 aluminum alloy. Trans Nonferr Metal Soc. 2014; 24:2307–2313.
44.
GB/T 7998-2005. Test method for inter-granular corrosion of aluminium alloys. National Standard of China.
45.
GB12445. 1–90. High strength alloys-method of stress corrosion test for double cantilever beam (DCB) specimens, National Standard of China.
46.
CristB.BE Lookup Table for Signals from Elements and Common Chemical species. In Handbook of monochromatic XPS spectra, the elements and native oxides. New York: John Wiley: 1999 vol. 1. Available at: http://www.xpsdata.com/XI_BE_Lookup_table.pdf
47.
HintonBRWArnottDRRyanNE.Inhibition of aluminum alloy corrosion by cerous cations. Met Forum. 1984; 7:211–217.
48.
VarelaFHillJForsythMThe inhibiting effects of cerium diphenyl phosphate on the corrosion and stress corrosion of 7075 aluminium alloy. 49th annual Conference of the Australasian Corrosion Association 2009: Corrosion and Prevention 2009; Australasian Corrosion Association; 2009. p. 804–814.
