This paper revisits the transformation curves of martensite. We obtained a comparative function compatible with plate and lath transformation validated with independent experimental data in the scientific literature, starting with a power law. The model bears two fitting parameters, which could be interpreted after established aspects of the transformations described in the literature. The model provides a framework to analyse ‘isothermal’, ‘athermal’, ‘bursting’ and ‘mechanical induced’ martensitic transformation curves.
KastnerOShneckRZ.On the entropic nucleation barrier in a martensitic transformation. Philos Mag. 2015; 95:1282–1308.
7.
ShankaraiahNMurthyKPNLookmanTIncubation times and entropy barriers in martensitic kinetics: Monte Carlo quench simulations of strain pseudospins. EPL. 2010; 92:36002.
8.
ShankaraiahN. Monte Carlo simulations of vector pseudospins for strains: Microstructures and martensitic conversion times. arXiv:150607283v1. 2018.
9.
ArtemevAWangYKhachaturyanAG.Three-dimensional phase field model and simulation of martensitic transformation in multilayer systems under applied stresses. Acta Mater. 2000; 48:2503–2518.
10.
ZhangWJinYMKhachaturyanAG.Phase field microelasticity modeling of heterogeneous nucleation and growth in martensitic alloys. Acta Mater. 2007; 55:565–574.
11.
MalikAYedduHKAmbergGThree dimensional elasto-plastic phase field simulation of martensitic transformation in polycrystal. Mater Sci Eng A. 2012; 556:221–232.
12.
HeoTWChenLQ.Phase-field modeling of displacive phase transformations in elastically anisotropic and inhomogeneous polycrystals. Acta Mater. 2014; 76:68–81.
13.
OlsonGBCohenM.Principles of martensitic transformation. In: MeyersMAInalOT, editor. Front mater technol. Amsterdam: Elsevier; 1985. p. 43–87.
14.
OlsonGBCohenM.Dislocation theory of martensitic transformation. In: NabarroFRN, editor. Dislocations in solids. Amsterdam: North-Holland; 1986. p. 295–407.
15.
KellyPM.Martensite crystallography – the role of the shape strain. Mater Sci Eng A. 2006: 438–440.:43–47.
16.
WechslerMSLiebermanDSReadTA.On the theory of the formation of martensite. Trans Metall Soc AIME. 1953; 197:1503–1515.
17.
BowlesJSMackenzieJK.The crystallography of martensite transformations I. Acta Metall. 1954; 2:129–137.
18.
MackenzieJKBowlesJS.The crystallography of martensite transformations II. Acta Metall. 1954; 2:138–147.
19.
BokrosJCParkerER.The mechanism of the martensite burst transformation in Fe-Ni single crystals. Acta Metall. 1963; 11:1291–1301.
20.
KikuchiTKajiwaraS.HVEM in situ observation of isothermal martensitic transformation under applied stress. Trans Japan Inst Met. 1985; 26:861–868.
21.
HaezebrouckDM. (1987). Nucleation and growth of a single martensite particle. Cambridge, Massachusetts: Massachusetts Institute of Technology.
22.
MiyamotoGShibataAMakiTPrecise measurement of strain accommodation in austenite matrix surrounding martensite in ferrous alloys by electron backscatter diffraction analysis. Acta Mater. 2009; 57:1120–1131.
23.
GuimarãesJRCRiosPR.Microstructural path analysis of martensite dimensions in FeNiC and FeC alloys. Mater Res. 2015; 18:595–601.
24.
HurstHE.Methods of using long-term storage in reservoirs. Proc Inst Civ Eng. 1956: 519–590.
25.
SzaszOSzigetiGPSzaszA.On the self-similarity in biological processes. Open J Biophys. 2017; 07: 183–196.
26.
HuyanFHedströmPBorgenstamA.Modelling of the fraction of martensite in low-alloy steels. Mater Today Proc. 2015; 2:S561–S564.
27.
GuimarãesJRCRiosPR.Revisiting temperature and magnetic effects on the Fe-30 Wt Pct Ni martensite transformation curve. Metall Mater Trans A Phys Metall Mater Sci. 2018; 49:5995–6000.
28.
AustinJBRickettRL.Kinetics of the decomposition of austenite at constant temperature. Am Inst Mining Metall Pet Eng. 1938; 135:396–415.
29.
FisherJCHollomonJHTurnbullD.Kinetics of the austenite-martensite transformation. Trans Metall Soc AIME. 1949; 185:691–700.
30.
GuimarãesJRCGomesJC.Microstructural aspects of martensite transformation in coarse-grained Fe-31.1 pct Ni-0.02 pct C. Metall Trans A. 1979; 10:109–112.
31.
LinMOlsonGBCohenM.Distributed-activation kinetics of heterogeneous martensitic nucleation. Metall Trans A. 1992; 23A:2987–2998.
32.
McMurtrieDGMageeCL.The average volume of martensite plates during transformation. Metall Trans. 1970; 1:3185–3191.
33.
PatiSRCohenM.Nucleation of the isothermal martensitic transformation. Acta Metall. 1969; 17:189–199.
34.
GhoshGRaghavanV.The kinetics of isothermal martensitic transformation in an Fe-23.2wt.%Ni-2.8wt.%Mn alloy. Mater Sci Eng A. 1986; 80:65–74.
35.
GuimarãesJRCRiosPR.Initial nucleation kinetics of martensite transformation. J Mater Sci. 2008; 43:5206–5210.
36.
KajiwaraS.Mechanism of isothermal martensitic transformation. Mater Trans JIM. 1992; 33:1027–1034.
37.
van BohemenSMCSietsmaJ.Martensite formation in partially and fully austenitic plain carbon steels. Metall Mater Trans A. 2009; 40A:1059–1068.
38.
MakiT.Recent advances in understanding martensite in steels. In: FuruharaTTsuzakiK, editor. Proc 1st Int symp steel Sci. Tokyo: ISIJ; 2007. p. 1–10.
39.
ZhangSMoritoSKomizoYI.Variant selection of low carbon high alloy steel in an austenite grain during martensite transformation. ISIJ Int. 2012; 52:510–515.
40.
MakiTTsuzakiKTamuraI.The morphology of microstructure composed of lath martensites in steels. Trans ISIJ. 1980; 20:207–214.
41.
ZackayVFParkerERFahrDThe enhancement of ductility in high-strength steels. Trans ASM. 1967; 60:252–259.
42.
De CoomanBC.International conference on TRIP-aided high strength ferrous alloys. Aachen: GRIPS’ Sparkling World of Steel; 2002; p. 386.
43.
YiHL.Review on Δ-transformation-induced plasticity (TRIP) steels with low density: the concept and current progress. JOM. 2014; 66:1759–1769.
44.
PatelJRCohenM.Criterion for the action of applied stress in the martensitic transformation. Acta Metall. 1953; 1:531–538.
45.
ShinHCHaTKChangYW.Kinetics of deformation induced martensitic transformation in a 304 stainless steel. Scr Mater. 2001; 45:823–829.
AngelT.Formation of martensite in austenitic stainless steels, effects of deformation, temperature composition. J Iron Steel Inst. 1954; 177:165–174.
48.
WangXLuiWEmburyD.Morphology and distribution of martensite in 301L alloy induced by different subsequent processes after prior deformation. Can Metall Q. 2011; 50:396–407.
49.
DasAChakrabortiPCTarafderSAnalysis of deformation induced martensitic transformation in stainless steels. Mater Sci Technol. 2011; 27:366–370.
50.
EmrechtsPMaejimaM.Self-similar processes. Princeton, New Jersey: Princet Ser Appl Math; 2002.
51.
RaghavanV.Formation sequence of plates in isothermal martensite transformation. Acta Metall. 1969; 17:1299–1303.
