In this study, two grades of Aluminium–Lithium alloys: AA8090 and AA2050 have been selected. Butt joints were produced using the Rotating arc welding process (SpinArc™) with ER4043 filler. Two different groove joints, Square Butt and V-Groove, were used during the process. The joints were subjected to analysis of microstructure, mechanical properties and electronic work function. A correlation was brought out between all these tests. The microstructure analysis showed the formation of Mg2Si and Al2Cu eutectics. It was also found that the joint made using the Square Butt joint exhibited greater weld strength and enhanced work function. Electron microscopy and XRD analysis revealed the presence of different strengthening precipitates at various zones.
LequeuPSmithKPDanie'louA.Aluminum-copper-lithium alloy 2050 developed for medium to thick plate. J Mater Eng Perform.2010; 19:841–847.
8.
MartukanitzRPNatalieCAKnoefelJO.The weldability of an AI-Li-Cu alloy. J Met.1987; 32:38–42.
9.
ÇamGİpekoğluG.Recent developments in joining of aluminium alloys. J Adv Manuf Technol.2016; 91:1851–1866.
10.
ZhanaXZhaoaYLiubZMicrostructure and porosity characteristics of 5A06 of aluminium alloy joints using laser-MIG hybrid welding. J Manuf Process. 2018; 35:437–455.
11.
FarajiaAHMoradibMGoodarziaMAn investigation on capability of hybrid Nd:YAG laser-TIG welding technology for AA2198 Al-Li alloy. Opt Lasers Eng. 2017; 96:1–6.
12.
ReddyGMGokhaleAA.Welding aspects of aluminum–lithium alloys. In: PrasadNEGokhaleAAWanhillRJH, editors. Aluminum-lithium alloys. Hyderabad: Butterworth-Heinemann, 2014. P. 259–302.
13.
MadhavanSKamarajMVijayaraghavanLMicrostructure and mechanical properties of aluminium/steel dissimilar weldments: effect of heat input. Mater Sci Technol. 2017; 33:200–209.
14.
RenziVDRousseauRMarchettoDMetal work-function changes induced by organic adsorbates: a combined experimental and theoretical study. Phys Rev Lett. 2005; 95:046804.
15.
MandalaAMaitabRChakrabortyaMEffect of TiB2 particles on aging response of Al4Cu alloy. Mater Sci Eng A. 2004; 386:296–300.
16.
LodhATakTNPrakashAMicrostructural origin of residual stress relief in aluminum. Metall Mater Trans A Phys Metall Mater Sci. 2019; 50:5038–5055.
17.
ZhangQZGongWBWeiLI.Microstructure and mechanical properties of dissimilar Al–Cu joints by friction stir welding. Trans. Nonferrous Metals Soc. China. 2015; 25(6):1779–1786.
18.
PuhakainenKBoströmMGroyTLA new phase in the system lithium–aluminum: characterization of orthorhombic Li2Al. J Solid State Chem. 2010; 183(11):2528–2533.
19.
MondalCMukhopadhyayAK.On the nature of T (Al2Mg3Zn3) and S (Al2CuMg) phases present in as-cast and annealed 7055 aluminum alloy. Mater Sci Eng A.2005; 391(1-2):367–376.
20.
Romero-RomeroJRLópez-MirandaJLEsparzaREspinosa-MedinaMARosasG. Phase evaluation and its hydrogen correlation of the FeAl3 and FeAl2 intermetallic alloys during mechanical ball-milling with water. Materials Science Forum 2014 (Vol. 793, p. 143–149). Trans Tech Publications Ltd.
21.
GaoKSongSLiSCharacterization of microstructures and growth orientation deviating of Al2Cu phase dendrite at different directional solidification rates. J Alloys Compd. 2016; 660:73–79.
22.
ShalabyRMKamalMSaleh WaqlanA.Influence of rapid solidification and lithium additions on microstructure and mechanical properties of aluminum based alloys. J Adv Phys. 2016; Vol. 12,No. 4.
23.
GhavidelMZKupstaMRLeJElectrochemical formation of four Al-Li phases (β-AlLi, Al2Li3, AlLi2− x, Al4Li9) at intermediate temperatures. J Electrochem Soc. 2019; 166(16):A4034.
24.
KimHChoiJSohnHJThe insertion mechanism of lithium into Mg2Si anode material for Li-Ion batteries. J Electrochem Soc. 1999; 146(12):4401.
25.
SaravananRRobertMC.Local structure of the thermoelectric material Mg2Si using XRD. J Alloys Compd. 2009; 479(1–2):26–31.
26.
SrivatsanTSSudarshanTS.Welding of lightweight aluminum-Lithium alloys. Weld J.1991; 70:173s–185s.
