To overcome the poor adhesion of diamond-like carbon (DLC) films to the steel substrate, an interlayer can be used. In this study, the effect of the addition of NiP-SiC nanocomposite coating as an interlayer in comparison to the NiP coating has been investigated on tribological properties of the DLC layer. Using nano-scratch and nano-indentation tests, the mechanical and nanotribological behaviour of the DLC layers, such as scratch resistance, coefficient of friction, interfacial adhesion between DLC layer and substrate, and hardness were characterised. DLC/NiP-SiC samples showed higher adhesion, hardness, elastic modulus, and lower friction coefficient. These results reveal the improved tribological properties of DLC film by applying the NiP-SiC nanocomposite interlayer in comparison to using the pure NiP interlayer.
VetterJ.60 years of DLC coatings: historical highlights and technical review of cathodic arc processes to synthesize various DLC types, and their evolution for industrial applications. Surf Coatings Technol. 2014; 257:213–240. doi:10.1016/j.surfcoat.2014.08.017
2.
ShahsavariFEhteshamzadehMNaimi-JamalMRNanoindentation and nanoscratch behaviors of DLC films growth on different thickness of Cr nanolayers. Diam Relat Mater. 2016; 70:76–82. doi:10.1016/j.diamond.2016.10.003
3.
CeminFBimLTMenezesCMOn the hydrogenated silicon carbide (SiCx:H) interlayer properties prompting adhesion of hydrogenated amorphous carbon (a-C:H) deposited on steel. Vacuum. 2014; 109:180–183. doi:10.1016/j.vacuum.2014.07.015
4.
WaseemBAlamSIrfanMOptimization and characterization of adhesion properties of DLC coatings on different substrates. IOP Conf Ser Mater Sci Eng. 2014; 60:012054.
5.
TakabayashiSJeškoRShinoharaMChemical structural analysis of diamondlike carbon films: I. Surface growth model. Surf Sci. 2018; 668:29–35.
6.
DengHChenDWangYEffects of silicon on microstructure and corrosion resistance of diamond-like-carbon film prepared on 2024 aluminum alloy by plasma-enhanced chemical vapor deposition. Diam Relat Mater. 2020; 110:108144.
7.
EbrahimiMMahboubiFNaimi-JamalMR.Optimization of pulsed DC PACVD parameters: toward reducing wear rate of the DLC films. Appl Surf Sci.2016; 389:521–531. doi:10.1016/j.apsusc.2016.06.182
8.
EbrahimiMMahboubiFNaimi-JamalMR.Wear behavior of DLC film on plasma nitrocarburized AISI 4140 steel by pulsed DC PACVD: effect of nitrocarburizing temperature. Diam Relat Mater Elsevier B.V. 2015. doi:10.1016/j.diamond.2014.12.004
9.
DalibonELPecinaJNCaboAFretting wear resistance of DLC hard coatings deposited on nitrided martensitic stainless steel. J Mater Res Technol. 2018: 1–8. doi:10.1016/j.jmrt.2017.12.004
10.
DammDContinABarbieriFInterlayers applied to CVD diamond deposition on steel substrate: a review. Coatings. 2017; 7:141.
11.
Da SilvaPCSRamosMARCoratEJDLC films grown on steel using an innovator active screen system for PECVD technique. Mater Res. 2016; 19:882–888. https://doi.org/10.1590/1980-5373-MR-2015-0456.
12.
BuenoA.H.SSolisJ.ZhaoH. Tribocorrosion evaluation of hydrogenated and silicon DLC coatings on carbon steel for use in valves, pistons and pumps in oil and gas industry. Wear. 2018; 394-395:60–70. https://doi.org/10.1016/j.wear.2017.09.026.
13.
GonczySTRandallN.An ASTM standard for quantitative scratch adhesion testing of thin, hard ceramic coatings. Int J Appl Ceram. Technol. 2005; 2:422–428.
14.
MadejM.The effect of TiN and CrN interlayers on the tribological behavior of DLC coatings. Wear. 2014; 317:179–187. doi:10.1016/j.wear.2014.05.008
15.
DuminicaFDBelchiRLibralessoLInvestigation of Cr(N)/DLC multilayer coatings elaborated by PVD for high wear resistance and low friction applications. Surf Coatings Technol. 2018; 337:396–403. doi:10.1016/j.surfcoat.2018.01.052
16.
KhademMKimDE.Friction and wear behaviors of bare and diamond-like carbon/chromium bi-layer coated SKH51 steel at low temperatures. Surf Coatings Technol. 2021; 412:127018. doi:10.1016/j.surfcoat.2021.127018
17.
KhalajZGhorannevissMVaghriE.Deposition of DLC film on stainless steel substrates coated by nickel using PECVD method. Acta Chim. Slov. 2012; 59:338–343.
18.
LeeCKChenCHTanAH.Electrochemical corrosion and wear behavior of an ultra-thin DLC film deposited on different annealing Ni-P layers on Al-Mg alloy in NaCl solution. Int J Electrochem Sci. 2016; 11:5983–5998.
19.
StaiaMHPuchi CabreraESIostATribological response of AA 2024-T3 aluminium alloy coated with a DLC duplex coating. Tribol Int. 2015; 85:74–87. doi:10.1016/j.triboint.2014.12.007
20.
SudagarJLianJShaW.Electroless nickel, alloy, composite and nano coatings - a critical review. J Alloys Compd. 2013; 571:183–204.
21.
KhodaeiMGholizadehAM.Surfactant-free commercial electroless bath with low concentration of SiC nanoparticles to prepare the NiP-SiC nanocomposite coatings. Mater Res Express. 2021; 8:055009.
CeminFBimLTLeidensLMIdentification of the chemical bonding prompting adhesion of a–C:H thin films on ferrous alloy intermediated by a SiCx:H buffer layer. ACS Applied Materials & Interfaces. 2015.
24.
VidakisNAntoniadisABilalisN.The VDI 3198 indentation test evaluation of a reliable qualitative control for layered compounds. J Mater Process Technol. 2003; 143–144:481–485.
25.
SunLGuoPKePSynergistic effect of Cu/Cr co-doping on the wettability and mechanical properties of diamond-like carbon films. Diam Relat Mater. 2016; 68:1–9. doi:10.1016/j.diamond.2016.05.006
26.
LiFZhangSKongJMultilayer DLC coatings via alternating bias during magnetron sputtering. Thin Solid Films. 2011; 519:4910–4916. doi:10.1016/j.tsf.2011.01.052
27.
ChenQYShihKMShenYHEffects of SiN
x interlayer on characterisation of amorphous diamond-like carbon films. Mater Sci Technol. 2015; 31:703–708. doi:10.1179/1743284714Y.0000000646
28.
ShahsavariFEhteshamzadehMAminMHA comparative study of surface morphology, mechanical and tribological properties of DLC films deposited on Cr and Ni nanolayers. Ceram Int. 2020; 46:5077–5085.
ErdemirADonnetC.Tribology of diamond-like carbon films: recent progress and future prospects. Journal of Physics D: Applied Physics. 2006; 39(17).
31.
BeakeB.DLiskiewiczT.WVishnyakovV.M. Development of DLC coating architectures for demanding functional surface applications through nano- and micro-mechanical testing. Surface and Coatings Technology. 2015; 284:334–343. https://doi.org/10.1016/j.surfcoat.2015.05.050.
