In this study, in-situ Al2O3p/Al composite was prepared by the exothermic dispersion method from Al-calcined kaolin system. Thermodynamic analysis was carried out by calculating Gibbs free energy. The reaction kinetics of the system was studied by differential scanning calorimetry and Kissinger equation. The effects of heating temperature and holding time on the microstructure of the composites were analysed. The results showed that the reaction activation energy of the system continued to increase with the progress of the reaction. With the extension of the reaction time at 800°C, the particle size of Al2O3 increased slowly. When the holding time was 50 min, the density and hardness of the composite material were 2.7 g cm−3 and 64HV respectively.
HuangZJYangBCuiHStudy on the fabrication of Al matrix composites strengthened by combined in-situ alumina particle and in-situ alloying elements. Mater Sci Eng A. 2003; 351(1–2):15–22.
2.
LakraSBandyopadhyayTKDasSSynthesis and characterization of in-situ (Al-Al3Ti-Al2O3)/Al dual matrix composite. J Alloys Compd. 2020; 842:155745.
3.
OstovanFMatoriKToozandehjaniMEffects of CNTs content and milling time on mechanical behavior of MWCNT-reinforced aluminum nanocomposites. Mater Chem Phys. 2015; 166: 160–166.
4.
HoweJM.Bonding, structure, and properties of metal/ceramic interfaces: Part 1 Chemical bonding, chemical reaction, and interfacial structure. Metall Rev. 1993; 38(5):233–256.
5.
ZhuHAiYLiJIn situ fabrication of α-Al2O3 and Ni2Al3 reinforced aluminum matrix composites in an Al-Ni2O3 system. Adv Powder Technol. 2011; 22(5):629–633.
6.
MallireddyNSivaK.Investigation of microstructural, mechanical and corrosion properties of AA7010-TiB2 in-situ metal matrix composite. Sci Eng Compos Mater. 2020; 27(1):97–107.
7.
ShonIJKoIYKangHSRapid synthesis and consolidation of nano-structured Al2O3-MgSiO3 composites by high frequency induction heated sintering. Met Mater Int. 2012; 18(1):115–119.
8.
LiangYZhouJDongSThermodynamic analysis of the formation of in-situ reinforced phases in cast Al-4.5Cu alloy. Journal of Wuhan University of Technology-Mater Sci Ed. 2008; 23(3):342–345.
9.
DeloguFTakacsL.Information on the mechanism of mechano-chemical reaction from detailed studies of the reaction kinetics. J Mater Sci. 2018; 53(19):13331–13342.
10.
OstovanFSattarAToozandehjaniMFabrication of Al5083 surface hybrid nanocomposite reinforced by CNTs and Al2O3 nanoparticles using friction stir processing. J Compos Mater. 2020; 54(8):1107–1117.
11.
OstovanFHasanzadehEToozandehjaniMA combined friction stir processing and ball milling route for fabrication Al5083-Al2O3 nanocomposite. Mater Res Express. 2019; 6:065012.
12.
LijayKJSelvamJDRDinaharanIMicrostructure and mechanical properties characterization of AA6061/TiC aluminum matrix composites synthesized by in situ reaction of silicon carbide and potassium fluotitanate. Trans Nonferrous Met Soc Chin. 2016; 26(7):1791–1800.
13.
RameshCSPramodSKeshavamurthyR.A study on microstructure and mechanical properties of Al 6061-TiB2 in-situ composites. Mater Sci Eng A. 2011; 528(12):4125–4132.
14.
YanQChenGZhangZIn-situ fabrication of submicron α-Al2O3 particle reinforced AlSi9Cu3 alloy matrix composites by TIG arc process. Mater Res Express. 2019; 6(6):066567.
15.
ZhuHMinJAiYThe reaction mechanism and mechanical properties of the composites fabricated in an Al-ZrO2-C system. Mater Sci Eng A. 2010; 527(23):6178–6183.
16.
WangCAXuJBDaiJProbing the reaction mechanism of Al/CuO nanocomposites doped with ammonium perchlorate. Nanotechnology. 2020; 31(25):9.
17.
AbrahamSJDinaharanISelvamJDRMicrostructural characterization and tensile behavior of rutile (TiO2)-reinforced AA6063 aluminum matrix composites prepared by friction stir processing. Acta Metall Sin (English Lett). 2019; 32(1):52–62.
18.
MorsyMSShoukryHMokhtarMMFacile production of nano-scale metakaolin: An investigation into its effect on compressive strength, pore structure and microstructural characteristics of mortar. Constr Build Mater. 2018; 172:243–250.
19.
SunTGeKWangGComparing pozzolanic activity from thermal-activated water-washed and coal-series kaolin in Portland cement mortar. Constr Build Mater. 2019; 227:117092.
20.
AhmedNMEl-SabbaghSH.The influence of kaolin and calcined kaolin on SBR composite properties. Polym Compos. 2014; 35(3):570–580.
21.
TanwongwanWWongkitikunTOnpechtKSurface enhancement and structure formation of metakaolin from Thailand kaolin on the various calcination temperature. Mater Today Proc. 2020; 23:777–781.
22.
WangBDingHDengY.Characterization of calcined kaolin/TiO2 composite particle material prepared by mechano-chemical method. Journal of Wuhan University of Technology-Mater Sci Ed. 2010; 25(5):765–769.
23.
FreitasMPianaroSANadalFNPreparation and characterization of SiC/kaolin/Al composite materials by squeeze-casting. Cerâmica. 2009; 55(335):271–280.
24.
ZhuHSunXYuZReaction mechanisms, resultant microstructures and tensile properties of Al-based composites fabricated in situ from Al-SiO2-Mg system. Adv Powder Technol. 2017; 28(10):2572–2580.
25.
YeDL.Practical inorganic thermodynamic data book. Beijing: Metallurgical Industry Press; 1981. p. 7–12.
26.
LiangYJCheYC.Thermodynamic data book of inorganic materials. Shenyang: Northeastern University Press; 1993. p. 24–36.
27.
FengCFFroyenL.On the reaction kinetics of an Al-TiO2-B system for producing in-situ Al/(Al2O3+TiB2) composites. J Mater Sci Lett. 2000; 19(2):103–105.
28.
KaveendranBWangGSHuangLJIn situ (Al3Zr + Al2O3np)/2024Al metal matrix composite with novel reinforcement distributions fabricated by reaction hot pressing. J Alloys Compd. 2013; 581:16–22.
29.
ToozandehjaniMOstovanFJamaludinKRProcess-microstructure-properties relationship in Al-CNTs-Al2O3 nanocomposites manufactured by hybrid powder metallurgy and microwave sintering process. Trans Nonferrous Met Soc Chin. 2020; 30(9):2339–2354.
30.
DikiciBGavgaliM.The effect of sintering time on synthesis of in situ submicron α-Al2O3 particles by the exothermic reactions of CuO particles in molten pure Al. J Alloys Compd. 2013; 551:101–107.
