The effect of continuously varying aluminium with a low content (x = 0.1–0.5) on as-cast AlxNbTiVZr high entropy alloys (HEAs) was studied. AlxNbTiVZr (x = 0.1, 0.2) HEAs showed a single BCC phase, while some lamellar second phases precipitated along the grain boundaries in AlxNbTiVZr (x = 0.3, 0.4, 0.5) alloys. With the increase in Al percentage, the compressive strength of AlxNbTiVZr HEAs increased from 1452 to 1667 MPa, whereas their ductility decreased from 19.40 to 6.15%. Notably, the AlxNbTiVZr HEAs showed both a higher specific yielding strength and considerable plastic strain than other Nb-Ti-V-X-Y HEAs and commercial Mg-, Ti-, and Ni-based alloys. Finally, the fracture morphologies of AlxNbTiVZr (x = 0.1–0.2) HEAs showed some features of compression ductility.
YehJWChenSKLinSJNanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes. Adv Eng Mater. 2004; 6:299–303. doi: 10.1002/adem.200300567
2.
SenkovONSenkovaSVDimidukDMOxidation behavior of a refractory NbCrMo0.5Ta0.5TiZr alloy. J Mater Sci. 2012; 47:6522–6534. doi: 10.1007/s10853-012-6582-0
3.
GuoNNWangLLuoLSMicrostructure and mechanical properties of refractory MoNbHfZrTi high entropy alloy. Mater Design. 2015; 81:87–94. doi: 10.1016/j.matdes.2015.05.019
4.
SenkovONWilksGBScottJMMechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta-20W20 refractory high entropy alloys. Intermetallics. 2011; 19:698–706. doi: 10.1016/j.intermet.2011.01.004
5.
ZhangLCaoZYLiuYBEffect of Al content on the microstructures and mechanical properties of Mg-Al alloys. Mater Sci Eng A. 2009; 508:129–133. doi: 10.1016/j.msea.2008.12.029
6.
YangTFXiaSQLiuSEffects of Al addition on microstructure and mechanical properties of AlxCoCrFeNi high entropy alloy. Mater Sci Eng A. 2015; 648:15–22. doi: 10.1016/j.msea.2015.09.034
7.
SenkovONSenkovaSVMiracleDBMechanical properties of low-density, refractory multi-principal element alloys of the Cr-Nb-Ti-V-Zr system. Mater Sci Eng A. 2013; 565:51–62. doi: 10.1016/j.msea.2012.12.018
8.
StepanovNDYurchenkoNYShaysultanovDGEffect of Al on structure and mechanical properties of AlxNbTiVZr (x = 0, 0.5, 1, 1.5) high entropy alloys. Mater Sci Technol. 2015; 31:1184–1193. doi: 10.1179/1743284715Y.0000000032
9.
VishwanadhBSarkarNGangilSSynthesis and microstructural characterization of a novel multicomponent equiatomic ZrNbAlTiV high entropy alloy. Scripta Mater. 2016; 124:146–150. doi: 10.1016/j.scriptamat.2016.07.018
10.
YangXZhangY.Prediction of high-entropy stabilized solid-solution in multi-component alloys. Mater Chem Phys. 2012; 132:233–238. doi: 10.1016/j.matchemphys.2011.11.021
11.
FangSSXiaoXLeiXRelationship between the widths of supercooled liquid regions and bond parameters of Mg-based bulk metallic glasses. J Non-Cryst Solids. 2003; 321:120–125. doi: 10.1016/S0022-3093(03)00155-8
12.
GuoSNgCLuJEffect of valance electron concentration on stability of fcc or bcc phase in high entropy alloys. J Appl Phys. 2011; 109(10):103505. doi: 10.1063/1.3587228
13.
WangZJHuangYHYangYAtomic-size effect and solid solubility of multicomponent alloys. Scripta Mater. 2015; 94:28–31. doi: 10.1016/j.scriptamat.2014.09.010
14.
YurchenkoNStepanovNSalishchevG.Laves-phase formation criterion for high-entropy alloys. Mater Sci Technol. 2017; 33(1):17–22. doi: 10.1080/02670836.2016.1153277
15.
HendrikJMJamesDP.Special points for Brillouin-zone integrations. Phys Rev B. 1976; 16:5188–5192.
16.
LinCMJuanCCChangCHEffect of Al addition on mechanical properties and microstructure of refractory AlxHfNbTaTiZr alloys. J Alloys Compd. 2015; 624:100–107. doi: 10.1016/j.jallcom.2014.11.064
17.
StepanovNDYurchenkoNYSkibinDVStructure and mechanical properties of the AlCrxNbTiV (x=0, 0.5, 1, 1.5) high entropy alloys. J Alloys Compd. 2015; 652:266–280. doi: 10.1016/j.jallcom.2015.08.224
18.
StepanovNDYurchenkoNYGridnevaAOStructure and hardness of B2 ordered refractory AlNbTiVZr0.5 high entropy alloy after high-pressure torsion. Mater Sci Eng, A. 2018; 716:308–315. doi: 10.1016/j.msea.2018.01.061
19.
KimMJKangGCHongSHUnderstanding microstructure and mechanical properties of (AlTa-0.76)xCoCrFeNi2.1 eutectic high entropy alloys via thermo-physical parameters. J Mater Sci Technol. 2020; 57:131–137. doi: 10.1016/j.jmst.2020.03.045
20.
SenkovONRaoSChaputKJCompositional effect on microstructure and properties of NbTiZr-based complex concentrated alloys. Acta Mater. 2018; 151:201–215. doi: 10.1016/j.actamat.2018.03.065
21.
SenkovONSenkovaSVWoodwardCLow-density, refractory multi-principal element alloys of the Cr-Nb-Ti-V-Zr system: microstructure and phase analysis. Acta Mater. 2013; 61:1545–1557. doi: 10.1016/j.actamat.2012.11.032
YurchenkoNYStepanovNDTikhonovskyMAPhase evolution of the AlxNbTiVZr (x=0; 0.5; 1; 1.5) high entropy alloys. Metals (Basel). 2016; 6(12):298. doi: 10.3390/met6120298
24.
YurchenkoNYStepanovNDShaysultanovDGEffect of Al content on structure and mechanical properties of the AlxCrNbTiVZr (x = 0, 0.25, 0.5, 1) high-entropy alloys. Mater Charact. 2016; 121:125–134. doi: 10.1016/j.matchar.2016.09.039
25.
StepanovNDShaysultanovDGSalishchevGAStructure and mechanical properties of a light-weight AlNbTiV high entropy alloy. Mater Lett. 2015; 142:153–155. doi: 10.1016/j.matlet.2014.11.162
26.
ParkHJKimYSMunSCDesigning of Fe-containing (Ti33Zr33Hf33)-(Ni50Cu50) high entropy alloys developed by equiatomic substitution: phase evolution and mechanical properties. J. Mater. Res. Technol. 2020; 9(4):7732–7739. doi: 10.1016/j.jmrt.2020.05.071
27.
JumaevEHongSHKimJTChemical evolution-induce strengthening on AlCoCrNi dual-phase high-entropy alloy with high specific strength. J. Alloys Compd. 2019; 777:828–834. doi: 10.1016/j.jallcom.2018.11.057
28.
SoniVSenkovONGwalaniBMicrostructural design for improving ductility of an initially brittle refractory high entropy alloy. Sci. Rep. 2018; 8(1):8816. doi: 10.1038/s41598-018-27144-3
29.
YurchenkoNYStepanovNDGridnevaAOEffect of Cr and Zr on phase stability of refractory Al-Cr-Nb-Ti-V-Zr high-entropy alloys. J Alloys Compd. 2018; 757:403–414. doi: 10.1016/j.jallcom.2018.05.099
30.
YurchenkoNYStepanovNDZherebtsovSVStructure and mechanical properties of B2 ordered refractory AlNbTiVZrx (x = 0–1.5) high-entropy all-oys. Mater Sci Eng A. 2017; 704:82–90. doi: 10.1016/j.msea.2017.08.019
31.
SenkovONSenkovaSVWoodwardCLow density refractory multiprincipal element alloys of the CrNbTiVZr system microstructure and phase analysis. Acta Mater. 2013; 61:1545–1557. doi: 10.1016/j.actamat.2012.11.032
ParkGHKimJTParkHJDevelopment of lightweight Mg-Li-Al alloys with high specific strength. J Alloys Compd. 2016; 680:116–120. doi: 10.1016/j.jallcom.2016.04.109
34.
NunesRAdamsJHAmmonsMASM HANDBOOK volume 2 properties and selection: Nonferrous alloys and Special-Purpose Materials. Ohio: ASM International; 1990.
StepanovNDYurchenkoNYSokolovskyVSAn AlNbTiVZr0.5 high-entropy alloy combining high specific strength and good ductility. Mater Lett. 2015; 161:136–139. doi: 10.1016/j.matlet.2015.08.099
