Simple closed-form expression of the generalised temperature integral in the basic equation to describe kinetic reactions for solid materials in linear heating process is always suitable for use in determining parameters. Many developed solutions only can give high accuracies on the general conditions. A new analytical approximate solution was deduced in this work. The deviations of this solution from the true value are fully analysed. This solution takes advantage in broader application conditions than other known solutions. The application of the new analytical approximate solution in austenite kinetic reaction in this work reinforces that austenite reaction rate is feasible to be given a priori.
XiaQLiuH.A theoretical method for obtaining Padé type approximation to temperature integrals via the Stieltjes integral. J Math Chem. 2018; 56:1262–1279. doi: 10.1007/s10910-017-0845-6
6.
ChenHLiuN.New approximate formula for the generalized temperature integral. AIChE J. 2009; 55:1766–1770. doi: 10.1002/aic.11775
7.
CaiJMLiuRH.New approximation for the general temperature integral. J Therm Anal Calorim. 2007; 90(2):469–474. doi: 10.1007/s10973-006-8178-x
8.
MazaheriYKermanpurANajafizadehAKinetics of ferrite recrystallization and austenite formation during intercritical annealing of the cold–rolled ferrite/martensite duplex structures. Metall Mater Trans A. 2016; 47(3):1040–1051. doi: 10.1007/s11661-015-3288-3
9.
CoatsAWRedfernJP.Kinetic parameters from thermogravimetric data. Nature. 1964; 201:68–69. doi: 10.1038/201068a0
10.
GorbachevVM.A solution of the exponential integral in the non–isothermal kinetics for linear heating. J Therm Anal Calorim. 1975; 8:349–350. doi: 10.1007/BF01904012
11.
LeeTVBeckSR.A new integral approximation formula for kinetic analysis of nonisothermal TGA data. AIChE J. 1984; 30:517–519. doi: 10.1002/aic.690300332
12.
AgrawalRKSivasubramanianMS.Integral approximations for nonisothermal kinetics. AIChE J. 1987; 33:1212–1214. doi: 10.1002/aic.690330716
13.
QuanyinRSuY.New approximations of the temperature integral for nonisothermal kinetics. J Therm Anal. 1995; 44:1147–1154. doi: 10.1007/BF02547544
14.
Pérez–MaquedaLACriadoJ.The accuracy of Senum and Yang's approximations to the Arrhenius integral. J Therm Anal Calorim. 2000; 60:909–915. doi: 10.1023/A:1010115926340
15.
WanjunTYuwenLHenZNew temperature integral approximate formula for non–isothermal kinetic analysis. J Therm Anal Calorim. 2003; 74:309–315. doi: 10.1023/A:1026310710529
16.
CaiJYaoFYiWNew temperature integral approximation for nonisothermal kinetics. AIChE J. 2006; 52:1554–1557. doi: 10.1002/aic.10732
17.
GorbachevVM.Algorism for the solution of the exponential integral in non–isothermal kinetics at linear heating. J Therm Anal Calorim. 1976; 10:447–449. doi: 10.1007/BF01909897
18.
ChenHLiuN.A procedure to approximate the generalized temperature integral. J Therm Anal Calorim. 2007; 90(2):449–452. doi: 10.1007/s10973-006-7942-2
19.
TomelliniM.Functional form of the Kolmogorov–johnson–mehl–avrami kinetics for non–isothermal phase transformations at constant heating rate. Thermochim Acta. 2013; 566:249–256. doi: 10.1016/j.tca.2013.06.002
20.
LiuFSommerFBosCAnalysis of solid state phase transformation kinetics: models and recipes. Int Mater Rev. 2007; 52:193–212. doi: 10.1179/174328007X160308
21.
FarjasJRouraP.Modification of the Kolmogorov–johnson–mehl–avrami rate equation for non–isothermal experiments and its analytical solution. Acta Mater. 2006; 54:5573–5579. doi: 10.1016/j.actamat.2006.07.037
22.
AbramowitzMStegunIA.Handbook of mathematical functions. 10th ed. Washington: Government Printing Office; 1972.
23.
LeiXWHuangJHChenSHExpanded lever rule for phase volume fraction calculation of high–strength low–alloy steel in thermal simulation. Metall Mater Trans A. 2016; 47A(6):2795–2803. doi: 10.1007/s11661-016-3410-1
24.
ZhangWElmerJWDebRoyT.Modeling and real time mapping of phases during GTA welding of 1005 steel. Mater Sci Eng A. 2002; 333:320–335. doi: 10.1016/S0921-5093(01)01857-3
25.
NathSKRay SVNSMNon-isothermal austenitisation kinetics and theoretical determination of intercritical annealing time for dual-phase Steels. ISIJ Int. 1994; 34:191–197. doi: 10.2355/isijinternational.34.191
26.
ElmerJWPalmerTAZhangWKinetic modeling of phase transformations occurring in the HAZ of C–Mn steel welds based on direct observations. Acta Mater. 2003; 51:3333–3349. doi: 10.1016/S1359-6454(03)00049-1
27.
KumarAMishraSElmerJW.Optimization of the Johnson–mehl–avarami equation parameters for α–ferrite to γ–austenite transformation in steel welds using a genetic algorithm. Metall Mater Trans A. 2005; 36A(1):15–22. doi: 10.1007/s11661-005-0134-z
28.
GuoZShaWLiD.Quantification of phase transformation kinetics of 18 wt.% Ni C250 maraging steel. Mater Sci Eng A. 2004; 373:10–20. doi: 10.1016/j.msea.2004.01.040
29.
HuangHWangBTangXModeling of non–isothermal austenite formation in spring steel. Metall Mater Trans A. 2017; 48A(11):5799–5804. doi: 10.1007/s11661-017-4368-3
30.
LiHGaiKHeLNon–isothermal phase–transformation kinetics model for evaluating the austenization of 55CrMo steel based on Johnson–mehl–avrami equation. Mater Design. 2016; 92:731–741. doi: 10.1016/j.matdes.2015.12.110
31.
FanfoniMTomelliniM.The Johnson–mehl–avrami–kohnogorov model: a brief review. Il Nuovo Cimento D. 1998; 20(7–8):1171–1182. doi: 10.1007/BF03185527
