Strength, ductility and fracture toughness are the most important mechanical properties of engineering materials. In this work, an Al–Zn–Mg–Cu alloy was subjected to multi-directional forging (MF) and ageing treatment. Microstructural evolution was studied by optical and electron microscopy and strength, ductility and fracture toughness were researched. After MF, the dislocation density was increased and the microstructure was refined. The strength and fracture toughness were increased, while the ductility was decreased sharply. Without compromising the strength, the ductility was improved significantly after ageing. The fracture toughness was increased further. The coarse and discontinuously distributed grain boundary precipitates were found to be responsible for higher fracture toughness of the fine-grained structure Al–Zn–Mg–Cu alloy.
HeinzAHaszlerAKeidelCRecent development in aluminium alloys for aerospace applications. Mater Sci Eng A. 2000; 280:102–107. doi: 10.1016/S0921-5093(99)00674-7
2.
DumontDDeschampsABrechetY.On the relationship between microstructure, strength and toughness in AA7050 aluminium alloy. Mater Sci Eng A. 2003; 356:326–336. doi: 10.1016/S0921-5093(03)00145-X
3.
DixitMMishraRSSankaranKK.Structure-property correlations in Al 7050 and Al 7055 high-strength aluminium alloys. Mater Sci Eng A. 2008; 478:163–172. doi: 10.1016/j.msea.2007.05.116
4.
KampNSinclairIStarinkMJ.Toughness-strength relations in the overaged 7449 Al-based alloy. Metall Mater Trans A. 2002; 33:1125–1136. doi: 10.1007/s11661-002-0214-2
5.
LiZXiongBZhangYInvestigation on strength, toughness and microstructure of an Al–Zn–Mg–Cu alloy pre-stretched thick plates in various aging tempers. J Mater Process Tech. 2008; 209:2021–2027. doi: 10.1016/j.jmatprotec.2008.04.052
6.
HanNZhangXLiuSEffects of pre-stretching and aging on the strength and fracture toughness of aluminium alloy 7050. Mater Sci Eng A. 2011; 528:3714–3721. doi: 10.1016/j.msea.2011.01.068
7.
ChenS-YChenK-HDongP-XEffect of heat treatment on stress corrosion cracking, fracture toughness and strength of 7085 aluminium alloy. Trans Nonferr Metal Soc. 2014; 24:2320–2325. doi: 10.1016/S1003-6326(14)63351-3
8.
FaleschiniMKreuzerHKienerDFracture toughness investigations of tungsten alloys and SPD tungsten alloys. J Nucl Mater. 2007; 367-370:800–805. doi: 10.1016/j.jnucmat.2007.03.079
9.
HohenwarterAPippanR.Fracture toughness evaluation of ultrafine-grained nickel. Scripta Mater. 2011; 64:982–985. doi: 10.1016/j.scriptamat.2011.02.007
10.
DarbanHMohammadiBDjavanroodF.Effect of equal channel angular pressing on fracture toughness of Al-7075. Eng Fail Anal. 2016; 65:1–10. doi: 10.1016/j.engfailanal.2016.03.010
11.
LokeshVSSGoelSKumarNA study on fracture toughness and strain rate sensitivity of severely deformed Al 6063 alloys processed by multiaxial forging and rolling at cryogenic temperature. Mater Sci Eng A. 2017; 686:82–92. doi: 10.1016/j.msea.2017.01.035
12.
HohenwarterAPippanR.Fracture and fracture toughness of nanopolycrystalline metals produced by severe plastic deformation. Philos Trans R Soc A Math Phys Eng. 2015; 373:20140366. doi: 10.1098/rsta.2014.0366
13.
SemenovaIPModinaJMPolyakovAVFracture toughness at cryogenic temperatures of ultrafine-grained Ti-6Al-4V alloy processed by ECAP. Mater Sci Eng A. 2018; 716:260–267. doi: 10.1016/j.msea.2017.12.106
14.
VzlievRZIslamgalievRKAlexandrovIV.Bulk nanostructured materials from severe plastic deformation. Prog Mater Sci. 2000; 45:103–189. doi: 10.1016/S0079-6425(99)00007-9
15.
EizadjouMManeshHDJanghorbanK.Microstructure and mechanical properties of ultra-fine grains (UFGs) aluminium strips produced by ARB process. J Alloy Compd. 2009; 474:406–415. doi: 10.1016/j.jallcom.2008.06.161
16.
VianaFPintoAMPSantosHMCLopesAB.Retrogression and re-aging of 7075 aluminium alloy: microstructural characterization. J Mater Process Tech. 1999; 92-93:54–59. doi: 10.1016/S0924-0136(99)00219-8
17.
LiJ-FPengZ-WLiC-XJiaZ-QChenW-JZhengZ-Q.Mechanical properties, corrosion behaviors and microstructures of 7075 aluminium alloy with various aging treatments. Trans Nonferr Metal Soc. 2008; 18:755–762. doi: 10.1016/S1003-6326(08)60130-2
18.
HoritaZKunihiroOFujitaTAchieving high strength and high ductility in precipitation-hardened alloys. Adv Mater. 2005; 17:1599–1602. doi: 10.1002/adma.200500069
19.
ZhaoY-HLiaoX-ZChengSSimultaneously increasing the ductility and strength of nanostructured alloys. Adv Mater. 2006; 18:2280–2283. doi: 10.1002/adma.200600310
20.
DieterGE.Mechanical metallurgy. New York: McGraw-Hill; 1986.
21.
LudtkaGMLaughlinDE.The influence of microstructure and strength on the fracture mode and toughness of 7XXX series aluminium alloys. Metall Mater Trans A. 1982; 13:411–425. doi: 10.1007/BF02643350
22.
HertzbergRW.Deformation and fracture mechanics of engineering materials. 2nd ed. New York ( NY): Wiley and Sons; 1983.
23.
ZhouHHuangM.Strength of metal materials. Beijing: Science Press; 1989.
