The effect of cryogenic treatment (CT) combined with solution and ageing treatment on the residual stress and microstructure of 7050 aluminium alloy was investigated. The relationship between residual stress and microstructure was discussed. The results showed that compared to solution–ageing treatment (SA), CT after solution and before ageing (SCA) exhibited lower level and higher uniformity of residual stress. The highest dimensional stability was also obtained by the process of SCA. It was found that CT induced the fine precipitates through the lattice contraction under cryogenic temperature. Furthermore, the execution of CT in advance would also promote the uniform distribution of precipitates in the subsequent ageing by releasing and homogenising the residual stress.
FanSTDengYLZhangYHomogenization of 7050 plates by a novel differential temperature rolling. Mater Manuf Process. 2018;
33:1822–1829. doi: 10.1080/10426914.2018.1476758
2.
SongYFDingXFZhaoXJThe effect of stress-aging on dimensional stability behavior of Al-Cu-Mg alloy. J Alloys Compd. 2017; 718:298–303. doi: 10.1016/j.jallcom.2017.05.183
3.
AraghchiMMansouriHVafaeiROptimization of the mechanical properties and residual stresses in 2024 aluminum alloy through heat treatment. J Mater Eng Perform. 2018; 12:1–5.
4.
WuGHQiaoJJiangLT.Research progress on principle of dimensional stability and stabilization design of Al and its composites. Acta Metall Sin. 2019; 55:37–48.
5.
KoçMCulpJAltanT.Prediction of residual stresses in quenched aluminum blocks and their reduction through cold working processes. J Mater Process Technol. 2006; 174:342–354. doi: 10.1016/j.jmatprotec.2006.02.007
6.
LiCMChengNPChenZQDeep-cryogenic-treatment-induced phase transformation in the Al-Zn-Mg-Cu alloy. Int J Min Met Mater. 2015; 22:68–77. doi: 10.1007/s12613-015-1045-7
7.
BarronRF.Cryogenic treatment of metals to improve wear resistance. Cryogenics (Guildf). 1982; 22:409–413. doi: 10.1016/0011-2275(82)90085-6
8.
YongAYLSeahKHWRahmanM.Performance evaluation of cryogenically treated tungsten carbide tools in turning. Int J Mach Tool Manuf. 2006; 46:2051–2056. doi: 10.1016/j.ijmachtools.2006.01.002
9.
SenthilkumarDRajendranIPellizzariMInfluence of shallow and deep cryogenic treatment on the residual state of stress of 4140 steel. J Mater Process Technol. 2011; 211:396–401. doi: 10.1016/j.jmatprotec.2010.10.018
10.
LiSZhaoKWangKMicrostructural evolution and thermal stability after aging of a cobalt-containing martensitic bearing steel. Mater Charact. 2017; 124:154–164. doi: 10.1016/j.matchar.2016.12.023
11.
LiuKChenXZShenQKMicrostructural evolution and mechanical properties of deep cryogenic treated Cu-Al-Si alloy fabricated by Cold Metal Transfer (CMT) process. Mater Charact. 2020[cited 2020 May 8]; [18 p.]. doi: 10.1016/j.matchar.2019.110011
12.
GuKXZhaoBWengZJMicrostructure evolution in metastable β titanium alloy subjected to deep cryogenic treatment. Mater Sci Eng A. 2018; 723:157–164. doi: 10.1016/j.msea.2018.03.003
13.
GuKXWangJJZhouY.Effect of cryogenic treatment on wear resistance of Ti–6Al–4 V alloy for biomedical applications. J Mech Behav Biomed Mater. 2014; 30:131–139. doi: 10.1016/j.jmbbm.2013.11.003
14.
LadosDAApelianDWangL.Minimization of residual stress in heat-treated Al-Si-Mg cast alloys using uphill quenching: mechanisms and effects on static and dynamic properties. Mater Sci Eng A. 2010; 527:3159–3165. doi: 10.1016/j.msea.2010.01.064
15.
AraghchiMMansouriHVafaeiRA novel cryogenic treatment for reduction of residual stresses in 2024 aluminum alloy. Mater Sci Eng A. 2017; 689:48–52. doi: 10.1016/j.msea.2017.01.095
16.
HongTRShenYWGengJWEffect of cryogenic pre-treatment on aging behavior of in-situ TiB2/Al–Cu–Mg composites. Mater Charact. 2016; 119:40–46. doi: 10.1016/j.matchar.2016.07.012
17.
SunJQMaYGaoCComprehensive tensile properties improved by deep cryogenic treatment prior to aging in friction-stir-welded 2198 Al–Li alloy. Rare Met. 2019[cited 2020 May 8]; [7 p.]. doi: 10.1007/s12598-019-01214-5
18.
AraghchiMMansouriHVafaeiR.Influence of cryogenic thermal treatment on mechanical properties of an Al–Cu–Mg alloy. Mater Sci Tech Lond. 2017; 34:1–5.
19.
WierszyłłowskiINiemczykW.The influence of deep cryogenic treatment on precipitation phenomena during tempering and ageing. Defect Diffus Forum. 2009; 283-286:65–73. doi: 10.4028/www.scientific.net/DDF.283-286.65
20.
GuKXWangKKChenLBMicro-plastic deformation behavior of Al-Zn-Mg-Cu alloy subjected to cryo-cycling treatment. Mater Sci Eng A. 2019; 10:672–679. doi: 10.1016/j.msea.2018.05.033
21.
SchajerGS.Measurement of non-uniform residual stresses using the hole-drilling method. Part I – stress calculation procedures. J Eng Mater T Asme. 1988; 110:338–343. doi: 10.1115/1.3226059
22.
PanRPirlingTZhengJHQuantification of thermal residual stresses relaxation in AA7xxx aluminium alloy through cold rolling. J Mater Process Tech. 2019; 264:454–468. doi: 10.1016/j.jmatprotec.2018.09.034
23.
SonarTLomteSGogteC.Cryogenic treatment of metal – a review. Mater Today. 2018; 5:25219–25228.
24.
WengZJGuKXWangKKThe reinforcement role of deep cryogenic treatment on the strength and toughness of alloy structural steel. Mater Sci Eng A.2020[cited 2020 May 8]; [8 p.]. doi: 10.1016/j.msea.2019.138698
25.
LiSHXiaoMGYeGMEffects of deep cryogenic treatment on microstructural evolution and alloy phases precipitation of a new low carbon martensitic stainless bearing steel during aging. Mater Sci Eng A. 2018; 732:167–177. doi: 10.1016/j.msea.2018.07.012
26.
GavriljukVGTheisenWSiroshVVLow-temperature martensitic transformation in tool steels in relation to their deep cryogenic treatment. Acta Mater. 2013; 61:1705–1715. doi: 10.1016/j.actamat.2012.11.045
