The effect of extrusion temperature on the microstructures and mechanical properties of as-extruded Zn–22Al alloys was investigated in this study. With decrease of extrusion temperature from 350 to 200°C, the elongation of as-extruded Zn–22Al alloys increases remarkably at low strain rate and has no change at high strain rate, which implies that the Zn–22Al alloys extruded at lower temperature exhibit high-ductility behaviour. X-ray diffraction and electron back-scattered diffraction analysis demonstrated that the maximum elongation of Zn–22Al alloys extruded at the extrusion temperature of 200°C can be attributed to the elimination of the lamellar structure and the refinement in grain size of the Zn-rich phase.
LangdonTG.Seventy-five years of superplasticity: historic developments and new opportunities. J Mater Sci. 2009; 44:5998–6010. doi: 10.1007/s10853-009-3780-5
2.
SunSNRenYPWangLQRoom temperature quasi-superplasticity behavior of backward extruded Zn-15Al alloys. Mater Sci Eng: A. 2016; 676:336–341. doi: 10.1016/j.msea.2016.09.013
3.
ZhangYMYangLJZengXDThe mechanism of anneal-hardening phenomenon in extruded Zn-Al alloys. Mater Des. 2016; 50:223–229. doi: 10.1016/j.matdes.2013.02.069
4.
DemirtasMPurcekGYanarHAchieving room temperature superplasticity in Zn-5Al alloy at high strain rates by equal-channel angular extrusion. J Alloys Compd. 2015; 623:213–218. doi: 10.1016/j.jallcom.2014.10.111
5.
DemirtasMPurcekGYanarHEffect of equal-channel angular pressing on room temperature superplasticity of quasi-single phase Zn-0.3Al alloy. Mater Sci Eng: A. 2015; 644:17–24. doi: 10.1016/j.msea.2015.07.041
6.
DemirtasMPurcekGYanarHEffect of natural aging on RT and HSR superplasticity of ultrafine grained Zn-22Al alloy. Mater Sci Forum. 2016; 838–839:320–325. doi: 10.4028/www.scientific.net/MSF.838-839.320
7.
UesugiTKawasakiMNinomiyaMSignificance of Si impurities on exceptional room-temperature superplasticity in a high-purity Zn-22% Al alloy. Mater Sci Eng: A. 2015; 645:47–56. doi: 10.1016/j.msea.2015.07.087
8.
DemirtasMPurcekGYanarHEffect of different processes on lamellar-free ultrafine grain formation, room temperature superplasticity and fracture mode of Zn-22Al alloys. J Alloys Compd. 2016; 663:775–783. doi: 10.1016/j.jallcom.2015.12.142
9.
KumarPXuCLangdonTG.Mechanical characteristics of a Zn-22% Al alloy processed to very high strains by ECAP. Mater Sci Eng: A. 2006; 429:324–328. doi: 10.1016/j.msea.2006.05.044
10.
ZhangYMZengXDSongZLPhase-transformation-induced hardening in Zn-22Al alloys. Philos Mag Lett. 2013; 93:322–330. doi: 10.1080/09500839.2013.776717
11.
ToshiakiMGorohIYoshinobuMMicrostructural evolution in Al-Zn eutectoid alloy by hot-rolling. Trans Nonferrous Met Soc China. 2014; 24:2107–2111. doi: 10.1016/S1003-6326(14)63319-7
12.
LiHYLiuYLuXCConstitutive modeling for hot deformation behavior of ZA27 alloy. J Mater Sci. 2012; 47:5411–5418. doi: 10.1007/s10853-012-6427-x
13.
TanakaTMakiiKKushibeAStudy on practical application of a new seismic damper using a Zn–Al alloy with a nanocrystalline microstructure. Int J Mech Sci. 2003; 45:1599–1612. doi: 10.1016/j.ijmecsci.2003.12.001
14.
JiSFanZ.Extruded microstructure of Zn-5 wt-%Al eutectic alloy processed by twin screw extrusion. Mater Sci Technol. 2012; 28:1287–1294. doi: 10.1179/1743284712Y.0000000064
15.
TanakaTMakiiKKushibeACapability of superplastic forming in the seismic device using Zn-22Al eutectoid alloy. Scr Mater. 2003; 49:361–366. doi: 10.1016/S1359-6462(03)00328-2
16.
ChoTSLeeHJAhnBMicrostructural evolution and mechanical properties in a Zn-Al eutectoid alloy processed by high-pressure torsion. Acta Mater. 2014; 72:67–79. doi: 10.1016/j.actamat.2014.03.026
17.
XiaSHWangJWangJTImprovement of room temperature superplasticity in Zn-22% Al alloy. Mater Sci Eng A. 2008; 493:111–115. doi: 10.1016/j.msea.2007.07.100
18.
HirataTTanakaTChungSWRelationship between deformation behavior and microstructural evolution of friction stir processed Zn-22 wt.% Al alloy. Scr Mater. 2007; 56:477–480. doi: 10.1016/j.scriptamat.2006.11.022
19.
ChouCYLeeSLLinJCEffects of cross-channel extrusion on the microstructures and superplasticity of a Zn-22 wt.% Al eutectoid alloy. Scr Mater. 2007; 57:972–975. doi: 10.1016/j.scriptamat.2007.04.029
20.
SunSNLiDYLiuDYMicrostructure and mechanical properties of continuous casting and extrusion Zn-15wt% Al alloys. Mater Lett. 2020; 261:127090. doi: 10.1016/j.matlet.2019.127090
21.
CetinMEDemirtasMSofuogluHEffect of grain size on room temperature deformation behavior of Zn-22Al alloy under uniaxial and biaxial loading conditions. Mater Sci Eng A. 2016; 672:78–87. doi: 10.1016/j.msea.2016.06.072
22.
SavaşkantH.Microstructure and mechanical properties of Zn-15Al-based ternary and quaternary alloys. Mater Sci Eng A. 2014; 603:52–57. doi: 10.1016/j.msea.2014.02.047
23.
KumarPXuCLangdonTG.The significance of grain boundary sliding in the superplastic Zn-22% Al alloys after processing by ECAP. Mater Sci Eng A. 2006; 410–411:447–450. doi: 10.1016/j.msea.2005.08.092
24.
DemirtasMPurcekGYanarHImprovement of high strain rate and room temperature superplasticty in Zn-22Al alloy by two-step equal-channel angular pressing. Mater Sci Eng A. 2015; 620:233–240. doi: 10.1016/j.msea.2014.09.114
25.
TanakaTKohzuMTakigawaYLow cycle fatigue behavior of Zn-22 mass% Al alloy exhibiting high-strain-rate superplasticity at room temperature. Scr Mater. 2005; 52:231–236. doi: 10.1016/j.scriptamat.2004.09.023
26.
ChoiICYooBGKraftOHigh-cycle fatigue behavior of Zn-22% Al alloy processed by high-pressure torsion. Mater Sci Eng A. 2014; 618:37–40. doi: 10.1016/j.msea.2014.08.084
27.
KawasakiMLangdonTG.Principles of superplasticity in ultrafine-grained materials. J Mater Sci. 2007; 42:1782–1796. doi: 10.1007/s10853-006-0954-2
28.
YehMSLinHYLinHYSuperplastic micro-forming with a fine grained Zn-22Al eutectoid alloy using hot embossing technology. J Mater Process Technol. 2006; 180:17–22. doi: 10.1016/j.jmatprotec.2006.04.013
29.
TanakaTKushibeAKohzuMLow-cycle fatigue properties of ultrafine-grained zinc-22 wt.% aluminum alloy during room-temperature superplastic flow. Scr Mater. 2008; 59:215–218. doi: 10.1016/j.scriptamat.2008.03.005
30.
KawasakiMLangdonTG.Flow behavior of a superplastic Zn-22 wt.% Al alloy processed by equal-channel angular pressing. Mater Sci Eng A. 2009; 503:48–51. doi: 10.1016/j.msea.2008.04.081
31.
TanakaTChungSWChaingLFOn applying superplastic Zn-22 wt.% Al alloy with nanocrystalline grains to general residential seismic dampers. Mater Sci Eng A. 2005; 410–411:109–113. doi: 10.1016/j.msea.2005.08.115
32.
YanXQLiuSXLongWMThe effect of homogenization treatment on microstructure and properties of ZnAl15 solder. Mater Des. 2013; 45:440–445. doi: 10.1016/j.matdes.2012.09.033
33.
YangCFPanJHLeeTHWork-softening and anneal-hardening behaviors in fine-grained Zn-Al alloys. J Alloys Compd. 2009; 468:230–236. doi: 10.1016/j.jallcom.2008.01.067
34.
KawasahiMLangdonTG.Grain boundary sliding in a superplastic zinc-aluminum alloy processed using severe plastic deformation. Mater Trans. 2008; 49:84–89. doi: 10.2320/matertrans.ME200720
35.
LiGYDingHWangJEffect of strain on cavity development during Al-Zn-Mg-Cu alloy superplastic flow. Mater Sci Tech-Lond. 2019; 35:939–945. doi: 10.1080/02670836.2019.1597485
36.
TanakaTMakiiKKushibeARoom temperature deformation behavior of Zn-22 mass% Al alloy with nanocrystalline structure. Mater Trans. 2002; 43:2449–2454. doi: 10.2320/matertrans.43.2449
