Morphology, growth behaviour and formation mechanism of TiC and its heterogeneous nucleation effect on ferrite in TiC-reinforced wear-resistant steel were theoretically and experimentally investigated. The dimensionless entropy of fusion (ΔSm/R) of TiC is calculated to be 2.9, suggesting that TiC exhibits faceted morphology. The size of TiC is about 0.9 μm after solidification according to the kinetic calculations of TiC particle growth, which is consistent with the size of the TiC observed in the experimental steel. Combined with the calculated planar disregistry between TiC and ferrite using the Bramfitt mode and their actual Kurdjumov–Sachs orientation relationship examined by using an EBSD (electron backscatter diffraction) technique, it indicates that TiC can serve as a preferred heterogeneous site for ferrite during solidification.
HolmbergKKivikytö-ReponenPHärkisaariPGlobal energy consumption due to friction and wear in the mining industry. Tribol Int. 2017; 115:116–139. doi: 10.1016/j.triboint.2017.05.010
2.
HolmbergKErdemirA.Influence of tribology on global energy consumption, costs and emissions. Friction. 2017; 5:263–284. doi: 10.1007/s40544-017-0183-5
3.
WangXHQuSYDuBSIn situ synthesised TiC particles reinforced Fe based composite coating produced by laser cladding. Mater Sci Technol. 2009; 25:388–392. doi: 10.1179/174328408X265631
4.
WoodJVDinsdaleKDaviesPProduction and properties of steel–TiC composites for wear applications. Mater Sci Technol. 1995; 11:1315–1320. doi: 10.1179/mst.1995.11.12.1315
5.
GülsoyHÖ. Production of injection moulded 316L stainless steels reinforced with TiC(N) particles. Mater Sci Technol. 2008; 24:1484–1491. doi: 10.1179/174328408X270239
6.
Md IdrissANMalequeMAYaacobIIMicrostructural aspects of wear behaviour of TiC coated low alloy steel. Mater Sci Technol. 2016; 32:303–307. doi: 10.1080/02670836.2016.1142049
7.
AlMangourBBaekMSGrzesiakDStrengthening of stainless steel by titanium carbide addition and grain refinement during selective laser melting. Mater Sci Eng A. 2018; 712:812–818. doi: 10.1016/j.msea.2017.11.126
8.
FaridAGuoSCuiFETib2 and TiC stainless steel matrix composites. Mater Lett. 2007; 61:189–191. doi: 10.1016/j.matlet.2006.04.028
9.
OlejnikESzymańskiŁBatógPTiC–FeCr local composite reinforcements obtained in situ in steel casting. J Mater Process Technol. 2020; 275:116157. doi: 10.1016/j.jmatprotec.2019.03.017
10.
KattamisTZSuganumaT.Solidification processing and tribological behavior of particulate TiC-ferrous matrix composites. Mater Sci Eng A. 1990; 128:241–252. doi: 10.1016/0921-5093(90)90232-R
11.
AlMangourBGrzesiakDYangJM.Selective laser melting of TiC reinforced 316L stainless steel matrix nanocomposites: influence of starting TiC particle size and volume content. Mater Des. 2016; 104:141–151. doi: 10.1016/j.matdes.2016.05.018
12.
LeeYHKoSParkHEffect of TiC particle size on high temperature oxidation behavior of TiC reinforced stainless steel. Appl Surf Sci. 2019; 480:951–955. doi: 10.1016/j.apsusc.2019.02.138
13.
FilipOHermannRSchultzL.Growth kinetics and TiC precipitation phenomena in Nd–Fe–B–Ti–C melts in dependence on cooling parameters and composition. Mater Sci Eng. 2004; 375–377:1044–1047. doi: 10.1016/j.msea.2003.10.064
14.
WangHTXuHZYuHS.Effects and mechanism of titanium on cast fluidity of ZG45. Adv Mater Res. 2011; 146–147:1243–1246. doi: 10.4028/www.scientific.net/AMR.146-147.1243
15.
BeidokhtiBKoukabiAHDolatiA.The change in the chemical composition and toughness of API 5L-X70 welds by addition of titanium. Int J Mod Phys B. 2009; 23:1209–1216. doi: 10.1142/S0217979209060701
16.
SulimaIKlimczykPMalczewskiP.Effect of TiB2 particles on the tribological properties of stainless steel matrix composites. Acta Metall Sin. 2014; 27:12–18. doi: 10.1007/s40195-013-0002-6
17.
BakerRGNuttingJ.The tempering of a Cr–Mo–V–W and a Mo–V steel. J Iron Steel Res Int. 1959; 192:257–268.
18.
KurdjumovGSachsG.Über den Mechanismus der Stahlhärtung. Z Phys. 1930; 64:325–343. doi: 10.1007/BF01397346
19.
BhadeshiaHKDHChristianJW.Bainite in steels. Metall Trans A. 1990; 21A:767–893. doi: 10.1007/BF02656561
20.
PitschW.The martensite transformation in thin foils of ironnitrogen alloys. Philos Mag. 1959; 4:577–584. doi: 10.1080/14786435908238253
21.
HuiXDYangYSChenXC.Fabricating TiC particulate reinforced Fe–Cr–Ni matrix composites by a liquid state in-situ synthesis. J Mater Sci Lett. 2000; 19:1281–1283. doi: 10.1023/A:1006746101612
22.
TirumalasettyGKvan HuisMAFangCMCharacterization of NbC and (Nb, Ti)N nanoprecipitates in TRIP assisted multiphase steels. Acta Mater. 2011; 59:7406–7415. doi: 10.1016/j.actamat.2011.08.012
23.
PothsRMHigginsonRLPalmiereEJ.Complex precipitation behaviour in a microalloyed plate steel. Scr Mater. 2001; 44:147–151. doi: 10.1016/S1359-6462(00)00617-5
24.
PardoAMerinoMCCoyAEInfluence of Ti, C and N concentration on the intergranular corrosion behaviour of AISI 316Ti and 321 stainless steels. Acta Mater. 2007; 5:239–2251.
25.
ScheilE.Bemerkungen zur schichtkristallbildung. Z Metallkd. 1942; 34:70–72.
26.
MengCYThomasBG.Heat-transfer and solidification model of continuous slab casting: CON1D. Metall Mater Trans B. 2003; 34:685–705. doi: 10.1007/s11663-003-0040-y
27.
OzturkBFruehanRJ.Thermodynamics of inclusion formation in Fe–Ti–C–N alloys. Metall Mater Trans B. 1990; 21:879–884. doi: 10.1007/BF02657814
28.
GotoHMiyazawaKIYamadaWEffect of cooling rate on composition of oxides precipitated during solidification of steels. ISIJ Int. 1995; 35:708–714. doi: 10.2355/isijinternational.35.708
29.
HanQYHanTFWangJ.Determination of diffusion coefficient of carbon in liquid iron. Acta Metall Sin. 1980; 16:435–441.
30.
JacksonKA.Mechanism of growth. In: DoremusRHRobertsBWTurnbullD, editors. Liquid metals and solidification. New York: John Wiley and Sons Inc.; 1958. p. 319–324.
31.
HuntJDJacksonKA.Binary eutectic solidification. Trans Metall Soc AIME. 1966; 236:843–852.
YongQL.Secondary phases in steels. Beijing: Metallurgical Industry Press; 2006.
34.
BramfittBL.The effect of carbide and nitride additions on the heterogeneous nucleation behavior of liquid Iron. Metall Trans. 1970; 1:1987–1995. doi: 10.1007/BF02642799
35.
TillerWA.Liquid metals and solidification. Cleveland: American Society for Metals; 1958.
36.
JangJHLeeCHHeoYUStability of (Ti, M)C (M= Nb, V, Mo and W) carbide in steels using first-principles calculations. Acta Mater. 2012; 60:208–217. doi: 10.1016/j.actamat.2011.09.051
37.
TakahashiM.Reaustenitization from bainite in steels [PhD thesis]. Cambridge (UK): University of Cambridge; 1992.
38.
HansenM.Constitution of binary alloys. London: McGraw-Hill Book Co.; 1958.
