The microstructure and mechanical properties of the Mg–3Sn–2Al–1Zn (TAZ321) alloy extruded at 180–250°C and at a ram speed of 0.08 mm/s were investigated by optical microscope, X-ray diffraction, scanning electron microscope, transmission electron microscope, tensile testing and microhardness tester. The results indicate that the as-extruded alloy shows ultrafine dynamic recrystallisation grains, nanoscale Mg2Sn precipitates of 50–80 nm, strong texture and excellent mechanical properties, the degree of which mainly depends on the extrusion temperature. The tensile yield strength and elongation vary from 413 MPa and 6.7% of TAZ321 extruded at 180°C to 312 MPa and 14.1% of TAZ321 extruded at 250°C, which can be regulated flexibly.
ZengZStanfordNDaviesCHJMagnesium extrusion alloys: a review of developments and prospects. Int Mater Rev. 2019; 64(1):27–62. doi: 10.1080/09506608.2017.1421439
2.
ZhangAKangRWuLA new rare-earth-free Mg-Sn-Ca-Mn wrought alloy with ultra-high strength and good ductility. Mater Sci Eng A. 2019; 754:269–274. doi: 10.1016/j.msea.2019.03.095
3.
ChengWLKimHSYouBSStrength and ductility of novel Mg–8Sn–1Al–1Zn alloys extruded at different speeds. Mater Lett. 2011; 65(11):1525–1527. doi: 10.1016/j.matlet.2011.03.010
4.
ParkSHKimS-HKimHSHigh-speed indirect extrusion of Mg–Sn–Al–Zn alloy and its influence on microstructure and mechanical properties. J Alloys Compd. 2016; 667:170–177. doi: 10.1016/j.jallcom.2016.01.163
5.
ChengWLTianQWYuHStrengthening mechanisms of indirect-extruded Mg–Sn based alloys at room temperature. J Magnesium Alloy. 2014; 2(4):299–304. doi: 10.1016/j.jma.2014.11.003
6.
ChengWBaiYWangLStrengthening effect of extruded Mg-8Sn-2Zn-2Al alloy: influence of micro and nano-size Mg2Sn precipitates. Materials (Basel). 2017; 10(7):822–833. doi: 10.3390/ma10070822
7.
ParkSHLeeJHYuHEffect of cold pre-forging on the microstructure and mechanical properties of extruded Mg–8Sn–1Al–1Zn alloy. Mater Sci Eng A. 2014; 612:197–201. doi: 10.1016/j.msea.2014.06.053
8.
ZenginHTurenY.Effect of La content and extrusion temperature on microstructure, texture and mechanical properties of Mg-Zn-Zr magnesium alloy. Mater Chem Phys. 2018; 214:421–430. doi: 10.1016/j.matchemphys.2018.04.110
9.
ElsayedFRSasakiTTOhkuboTEffect of extrusion conditions on microstructure and mechanical properties of microalloyed Mg–Sn–Al–Zn alloys. Mater Sci Eng A. 2013; 588:318–328. doi: 10.1016/j.msea.2013.09.050
10.
ParkSHKimHSYouBS.Prediction of grain size and yield strength of Mg-7Sn-1Al-1Zn alloys extruded at various temperatures and speeds. Met Mater Int. 2014; 20(2):291–296. doi: 10.1007/s12540-014-2011-z
11.
HuangXChinoYYuasaMMicrostructure and mechanical properties of AZX912 magnesium alloy extruded at different temperatures. Mater Sci Eng A. 2017; 679:162–171. doi: 10.1016/j.msea.2016.10.032
12.
PourbahariBMirzadehHEmamyMEnhanced ductility of a fine-grained Mg-Gd-Al-Zn magnesium alloy by Hot extrusion. Adv Eng Mater. 2018; 20(8). 1701171. doi: 10.1002/adem.201701171
13.
ParkSHYouBSMishraRKEffects of extrusion parameters on the microstructure and mechanical properties of Mg–Zn–(Mn)–Ce/Gd alloys. Mater Sci Eng A. 2014; 598:396–406. doi: 10.1016/j.msea.2014.01.051
14.
YuHParkSHYouBS.Development of extraordinary high-strength Mg–8Al–0.5Zn alloy via a low temperature and slow speed extrusion. Mater Sci Eng A. 2014; 610:445–449. doi: 10.1016/j.msea.2014.05.058
ZengZRZhuYMLiuRLAchieving exceptionally high strength in Mg-3Al-1Zn-0.3Mn extrusions via suppressing intergranular deformation. Acta Mater. 2018; 160:97–108. doi: 10.1016/j.actamat.2018.08.045
17.
GusievaKDaviesCHJScullyJRCorrosion of magnesium alloys: the role of alloying. Int Mater Rev. 2014; 60(3):169–194. doi: 10.1179/1743280414Y.0000000046
18.
WenwenGChunmingWWuchengDThe microstructure and mechanical properties of as-extruded Ca-containing Mg–6Zn–3La alloys. Mater Res Exp. 2019; 6(9). 0965b6.
19.
BaiYChengW-LMaS-CInfluence of initial microstructure on the strengthening effect of extruded Mg–8Sn–4Zn–2Al alloys. Acta Metall Sin (Engl Lett). 2017; 31(5):487–495. doi: 10.1007/s40195-017-0673-5
20.
JiangJLiTBiG-LMicrostructure and mechanical properties of extruded Mg-7Sn-5Zn-xAl (x = 0, 1, 2 and 3 wt.%) alloy. J Mater Eng Perform. 2019; 28(5):2672–2680. doi: 10.1007/s11665-019-04053-8
21.
KimYKSohnSWKimDHRole of icosahedral phase in enhancing the strength of Mg–Sn–Zn–Al alloy. J Alloys Compd. 2013; 549:46–50. doi: 10.1016/j.jallcom.2012.09.050
22.
WangSMaRYangLPrecipitates effect on microstructure of as-deformed and as-annealed AZ41 magnesium alloys by adding Mn and Ca. J Mater Sci. 2010; 46(9):3060–3065. doi: 10.1007/s10853-010-5184-y
23.
ParkSHYouBS.Effect of homogenization temperature on the microstructure and mechanical properties of extruded Mg–7Sn–1Al–1Zn alloy. J Alloys Compd. 2015; 637:332–338. doi: 10.1016/j.jallcom.2015.03.030
24.
KimS-HLeeJUKimYJControlling the microstructure and improving the tensile properties of extruded Mg-Sn-Zn alloy through Al addition. J Alloys Compd. 2018; 751:1–11. doi: 10.1016/j.jallcom.2018.04.063
25.
JungJ-GParkSHYouBS.Effect of aging prior to extrusion on the microstructure and mechanical properties of Mg–7Sn–1Al–1Zn alloy. J Alloys Compd. 2015; 627:324–332. doi: 10.1016/j.jallcom.2014.11.213
26.
ParkSHJungJ-GKimYMA new high-strength extruded Mg-8Al-4Sn-2Zn alloy. Mater Lett. 2015; 139:35–38. doi: 10.1016/j.matlet.2014.10.033
27.
SheJPanFHuHMicrostructures and mechanical properties of as-extruded Mg–5Sn–1Zn–xAl (x = 1, 3 and 5) alloys. Progr Nat Sci Mate Int. 2015; 25(4):267–275. doi: 10.1016/j.pnsc.2015.08.007
28.
WangLMostaedECaoXEffects of texture and grain size on mechanical properties of AZ80 magnesium alloys at lower temperatures. Mater Des. 2016; 89:1–8. doi: 10.1016/j.matdes.2015.09.153
29.
LiW-jDengK-kZhangXEffect of ultra-slow extrusion speed on the microstructure and mechanical properties of Mg-4Zn-0.5Ca alloy. Mater Sci Eng A. 2016; 677:367–375. doi: 10.1016/j.msea.2016.09.059
30.
ChengWTianLWangHImproved tensile properties of an equal channel angular pressed (ECAPed) Mg-8Sn-6Zn-2Al alloy by prior aging treatment. Mater Sci Eng A. 2017; 687:148–154. doi: 10.1016/j.msea.2017.01.054
31.
LiWHuangXLiXEnhanced age-hardening response and compression property of a Mg-7Sn-1Ca-1Ag (wt.%) alloy by extrusion combined with aging treatment. J Alloys Compd. 2018; 766:584–593. doi: 10.1016/j.jallcom.2018.06.350
32.
AzeemMATewariAMishraSDevelopment of novel grain morphology during hot extrusion of magnesium AZ21 alloy. Acta Mater. 2010; 58(5):1495–1502. doi: 10.1016/j.actamat.2009.10.056
33.
AndoDKoikeJSutouY.Relationship between deformation twinning and surface step formation in AZ31 magnesium alloys. Acta Mater. 2010; 58(13):4316–4324. doi: 10.1016/j.actamat.2010.03.044
34.
GhaderiABarnettMR.Sensitivity of deformation twinning to grain size in titanium and magnesium. Acta Mater. 2011; 59(20):7824–7839. doi: 10.1016/j.actamat.2011.09.018
35.
LiZTZhangXDZhengMYEffect of Ca/Al ratio on microstructure and mechanical properties of Mg-Al-Ca-Mn alloys. Mater Sci Eng A. 2017; 682:423–432. doi: 10.1016/j.msea.2016.11.026
